Phase transformation-induced microstructural inhomogeneity in adiabatic shear bands of a metastable beta-titanium alloy
Source abstract
Abstract
The growing demands for industrial applications with enhanced high strain-rate performance necessitates a deeper understanding of material behavior under dynamic loading. Adiabatic shear band (ASB) formation is a primary instability in materials subjected to high strain-rate dynamic loading. Understanding the microstructural evolution within ASBs is crucial for elucidating the mechanisms of adiabatic shear instability. In this study, advanced characterization techniques and lattice strain calculations were employed to identify the intricate atomic-level deformation mechanisms in the adiabatic shear region of a metastable β titanium alloy. This investigation revealed a phase transformation sequence of β to α'' and subsequently to α, which resulted in a heterogeneous multi-phase microstructure. Additionally, nano-twinning was observed in both α''-martensite and the HCP-α phase, significantly promoting grain refinement. Inhomogeneous strain distributions at twin and phase boundaries facilitated the initiation of micro-void and micro-cracks during dynamic deformation, ultimately resulting in adiabatic shear failure. The limited temperature rise within the ASB, supported by kinetic calculations, suggested that grain refinement occurred predominantly through dislocation migration-governed dynamic recovery mechanism. By systematically correlating the microstructural evolution with the mechanical response of the alloy, the findings provide a theoretical foundation for developing high-performance materials with improved resistance to adiabatic shear failure under high-speed dynamic loading.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Tuning the scale of α precipitates in β-titanium alloys for achieving high strength10.1016/j.scriptamat.2018.05.040 ↗
2. High-strength titanium alloys for aerospace engineering applications: a review on melting-forging process10.1016/j.msea.2022.143260 ↗
3. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
4. State of the art in beta titanium alloys for airframe applications10.1007/s11837-015-1442-4 ↗
5. Abnormal work hardening in a TRIP-assisted metastable β titanium alloy under high strain rate loading10.1016/j.msea.2022.142813 ↗
6. Effect of shock-induced martensite transformation on the postshock mechanical response of metastable β titanium alloys10.1016/j.jallcom.2013.07.028 ↗
7. Effect of α phase fraction on the dynamic mechanical behavior of a dual-phase metastable β titanium alloy Ti–10V–2Fe–3Al10.1016/j.msea.2021.141322 ↗
8. Strain rate dependence of deformation-induced transformation and twinning in a metastable titanium alloy10.1016/j.actamat.2015.11.026 ↗
9. Shear localization in metallic materials at high strain rates10.1016/j.pmatsci.2020.100755 ↗
10. Dynamic compression deformation behavior of laser directed energy deposited α+β duplex titanium alloy with basket-weave morphology
11. Microstructure evolution and characterization of the adiabatic shear bands in AZ31 magnesium alloy10.1016/j.matchar.2023.112726 ↗
12. Microstructural evolution and ultrafine-grain formation during dynamic shear in pure tantalum10.1016/j.matchar.2022.111820 ↗
13. Microstructure and texture evolution near the adiabatic shear band (ASB) in TC17 titanium alloy with starting equiaxed microstructure studied by EBSD10.1016/j.matchar.2019.03.009 ↗
14. Dynamic shear behavior of forged CrMnFeCoNi high entropy alloy using hat-shaped specimens over a wide range of temperatures and strain rates10.1016/j.ijplas.2023.103761 ↗
15. Adiabatic shear instability in a titanium alloy: extreme deformation-induced phase transformation, nanotwinning, and grain refinement10.1016/j.jmst.2022.11.047 ↗
16. Adiabatic shear localization in metallic materials: review10.3390/ma17215365 ↗
17. Characterization of adiabatic shear bands in AM60B magnesium alloy under ballistic impact10.1016/j.matchar.2011.03.003 ↗
18. A basic approach for strain rate dependent energy conversion including heat transfer effects: an experimental and numerical study10.1016/j.jmatprotec.2006.07.040 ↗
19. Large strain mechanical behavior of 1018 cold-rolled steel over a wide range of strain rates10.1007/s11661-003-0188-8 ↗
20. Novel Fe-0.3Cr-0.4Mo-1.5Mn–3Ni-0.6C tool steel with superior properties under quasi-static and dynamic loading10.1016/j.msea.2021.142156 ↗
21. Superior dynamic shear properties by structures with dual gradients in medium entropy alloys10.1016/j.jmst.2023.01.014 ↗
22. Gradient structure produces superior dynamic shear properties10.1080/21663831.2017.1334715 ↗
23. Thermodynamics-kinetics of twinning/martensitic transformation in Fe50Mn30Co10Cr10 high-entropy alloy during adiabatic shearing10.1016/j.scriptamat.2020.02.024 ↗
24. Adiabatic shear banding of hot-extruded tungsten heavy alloy under cryogenic temperature10.1007/s12598-012-0454-2 ↗
25. Z.-m., shear localization behavior in hat-shaped specimen of near-α Ti−6Al−2Zr−1Mo−1V titanium alloy loaded at high strain rate10.1016/S1003-6326(21)65604-2 ↗
26. Effect of high strain rate on plastic deformation of a low alloy steel subjected to ballistic impact10.1016/j.jmatprotec.2005.02.157 ↗
27. Forecast of adiabatic shear band formation in two commercial Ultrahigh-Strength armor steels by split hopkinson pressure bar10.1007/s11661-020-05814-0 ↗
28. High-strain-rate deformation: Stress-induced phase transformation and nanostructures in a titanium alloy10.1016/j.ijplas.2023.103707 ↗
29. "Self-sharpening" tungsten high-entropy alloy10.1016/j.actamat.2020.01.005 ↗
30. A new dynamic recrystallization mechanism in adiabatic shear band of an α/β dual phase titanium alloy: composition redistribution10.1016/j.scriptamat.2021.114229 ↗
31. Incipient dynamic recrystallization and adiabatic shear bands in Ti-7Al studied via in situ X-ray diffraction10.1016/j.ijplas.2021.102992 ↗
32. Dynamic recrystallization as a potential cause for adiabatic shear failure10.1103/PhysRevLett.101.165501 ↗
33. Microstructural evolution in adiabatic shear localization in stainless steel10.1016/S1359-6454(02)00526-8 ↗
34. Adiabatic shear localization in a near beta Ti-5Al-5Mo-5V-1Cr-1Fe alloy10.1016/j.msea.2015.05.043 ↗
35. Shear banding-activated dynamic recrystallization and phase transformation during quasi-static loading of β-metastable Ti-12 wt% mo alloy10.1016/j.actamat.2022.118088 ↗
36. Enhanced dynamic mechanical properties and resistance to the formation of adiabatic shear band by Cu-rich nano-precipitates in high-strength steels10.1016/j.ijplas.2020.102924 ↗
37. Deciphering the microstructural evolution and adiabatic shearing behavior of the titanium alloy with stress-induced ω phase transformation during dynamic compression10.1016/j.matdes.2022.110939 ↗
38. Metallurgical effects on impact loaded materials
39. Catastrophic thermoplastic shear10.1115/1.3629585 ↗
40. Multiple deformation mechanisms in adiabatic shear bands of a titanium alloy during high strain rate deformation10.3390/ma17153645 ↗
41. Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects10.1016/j.actamat.2013.07.019 ↗
42. Microstructure evolution and composition redistribution of FeCoNiCrMn high entropy alloy under extreme plastic deformation10.1080/21663831.2021.2023678 ↗
43. The effect of oxygen on α″ martensite and superelasticity in Ti-24Nb-4Zr-8Sn10.1016/j.actamat.2010.09.015 ↗
44. Composition-dependent magnitude of atomic shuffles in Ti–Nb martensites10.1107/S1600576714012576 ↗
45. A new grain orientation spread approach to analyze the dynamic recrystallization behavior of a cast-homogenized Mg-Zn-Zr alloy using electron backscattered diffraction10.1016/j.msea.2017.10.062 ↗
46. Mechanism of continuous dynamic recrystallization in a 50Ti-47Ni-3Fe shape memory alloy during hot compressive deformation10.1016/j.jallcom.2016.09.228 ↗
47. Twin recrystallization mechanisms in magnesium-rare earth alloys10.1016/j.actamat.2015.05.044 ↗
48. Crystallography and asymmetry of tensile and compressive stress-induced martensitic transformation in metastable β titanium alloy Ti-7Mo-3Nb-3Cr-3Al10.1016/j.jallcom.2019.151762 ↗
49. Deformation twinning in the full-α″ martensitic Ti-25Ta-20Nb shape memory alloy10.1016/j.actamat.2015.12.001 ↗
50. Formation and reversion of stress induced martensite in Ti-10V-2Fe-3Al10.1016/0001-6160(82)90137-7 ↗
51. Dynamic deformation behavior of a FeCrNi medium entropy alloy10.1016/j.jmst.2021.05.049 ↗
52. Twinning and the ductility of magnesium alloys part II. “Contraction” Twins10.1016/j.msea.2007.02.109 ↗
53. The origin of “rare earth” texture development in extruded Mg-based alloys and its effect on tensile ductility10.1016/j.msea.2008.05.045 ↗
54. Ultrastrong nanotwinned titanium alloys through additive manufacturing10.1038/s41563-022-01359-2 ↗
55. Complexion-mediated martensitic phase transformation in titanium
56. On the prediction of martensite formation in metals10.1016/j.scriptamat.2017.05.026 ↗
57. Deformation mechanism of metastable titanium alloy showing stress-induced α′-Martensitic transformation10.1016/j.jallcom.2018.12.160 ↗
58. Stress-Induced twinning and phase transformations during the compression of a Ti-10V-3Fe-3Al alloy10.1007/s11661-016-3675-4 ↗
59. Dynamic deformation behavior of single phase VNbTa medium-entropy alloys10.1016/j.matchar.2024.114036 ↗
60. High-velocity deformation of Al0.3CoCrFeNi high-entropy alloy: remarkable resistance to shear failure
61. Dynamic deformation behaviors and structure evolution of TiZrHf hexagonal closed-packed medium-entropy alloy10.1016/j.msea.2024.147516 ↗
62. Adiabatic shear localization induced by dynamic recrystallization in an FCC high entropy alloy10.1016/j.ijplas.2023.103550 ↗
63. Microstructural evolution in adiabatic shear bands of copper at high strain rates: electron backscatter diffraction characterization10.1016/j.matchar.2011.11.011 ↗
64. Analysis of adiabatic shear bands in thermo-elasto-viscoplastic materials by using piece-wise discontinuous basis functions10.1016/j.apm.2014.04.007 ↗
65. Strain-rate effects and dynamic behavior of high entropy alloys10.1016/j.jmrt.2022.11.057 ↗
66. Dynamic deformation and failure of ultrafine-grained titanium10.1016/j.actamat.2016.11.041 ↗
67. Shear localization in dynamic deformation of materials: microstructural evolution and self-organization10.1016/S0921-5093(01)01160-1 ↗
68. Microstructural evolution in adiabatic shear bands in ta and Ta-W alloys10.1016/S1359-6454(01)00215-4 ↗
69. Shear localization in polycrystalline metal at high-strain rates with dynamic recrystallization: crystal plasticity modeling and texture effect10.1016/j.ijplas.2023.103616 ↗
70. Role of stress-induced martensite on damage behavior in a metastable titanium alloy10.1016/j.ijplas.2021.103103 ↗
71. Strain rate dependence of strengthening mechanisms in ultrahigh strength lath martensite10.1016/j.ijplas.2022.103495 ↗