journal article·2025-08Open access

In-situ EBSD analysis reveals the crucial role of strain localization mitigation in achieving strength-ductility synergy in Al0.5CoCrFeMnNi high-entropy alloys

He Shao, Wenjuan Xing, Zhonghan Yu, Changyi Liu, Shizhong Zhang

Abstract

The phase interface in biphasic heterogeneous high-entropy alloys (HEAs) critically influences their mechanical properties. In this study, we systematically investigated the microstructural evolution and mechanical behavior in an Al 0.5 CoCrFeMnNi biphasic HEA subjected to hot forging followed by annealing treatments. The annealed alloy exhibited a yield strength of 365 MPa, an ultimate tensile strength of 765 MPa, and an elongation at break of 23.4 %, representing increases of 47.2 %, 41.4 %, and 7.3 %, respectively, compared with homogenized samples. These results demonstrate a significant synergistic enhancement of both strength and ductility. To elucidate the relationship between microstructural evolution at phase interfaces and damage mechanisms, in-situ electron backscatter diffraction (EBSD) tensile tests were conducted on hot-forged and annealed samples. The hot-forged samples showed limited ductility due to pronounced strain localization at FCC/BCC phase boundaries, which led to severe stress concentrations, premature fracture, and insufficient activation of heterogeneous deformation-induced (HDI) strengthening and strain-hardening mechanisms. In contrast, annealing induced grain refinement and promoted a heterogeneous grain structure, which enhanced dislocation-blocking capability, improved dislocation accommodation, and promoted HDI strain hardening. These microstructural changes effectively alleviated strain localization and reduced stress concentrations at FCC/BCC interfaces, thereby suppressing crack initiation and propagation along phase boundaries and markedly improving ductility. Our findings highlight the crucial role of mitigating strain localization at phase interfaces to achieve an optimal strength-ductility synergy and provide valuable theoretical guidance for microstructure design in heterogeneous HEAs.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Inherent and multiple strain hardening imparting synergistic ultrahigh strength and ductility in a low stacking faulted heterogeneous high-entropy alloy10.1016/j.actamat.2022.118516 ↗
2. Secondary phases in Al CoCrFeNi high-entropy alloys: an in-situ TEM heating study and thermodynamic appraisal10.1016/j.actamat.2017.03.066 ↗
3. Gradient cell–structured high-entropy alloy with exceptional strength and ductility10.1126/science.abj8114 ↗
4. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
5. Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0.3CoCrFeNi high entropy alloy10.1016/j.matdes.2017.02.072 ↗
6. Significant lattice-distortion effect on compressive deformation in Mo-added CoCrFeNi-based high-entropy alloys10.1016/j.msea.2021.142295 ↗
7. Anomalous precipitate-size-dependent ductility in multicomponent high-entropy alloys with dense nanoscale precipitates10.1016/j.actamat.2021.117480 ↗
8. Microstructural evolution and strengthening mechanisms in CrxMnFeNi high-entropy alloy10.1016/j.jmrt.2021.04.020 ↗
9. Structure-property relationships in hot forged AlxCoCrFeNi high entropy alloys
10. Realizing superior strength-ductility combination in dual-phase AlFeCoNiV high-entropy alloy through composition and microstructure design10.1080/21663831.2022.2093140 ↗
11. Systematical analysis on the grain orientation evolution of pure nickel under plastic deformation by using in-situ EBSD10.1016/j.msea.2020.139722 ↗
12. Effect of grain size on deformation and fracture of Inconel718: An in-situ SEM-EBSD-DIC investigation10.1016/j.msea.2022.144361 ↗
13. Microstructure tailoring of Al0.5CoCrFeMnNi to achieve high strength and high uniform strain using severe plastic deformation and an annealing treatment10.1016/j.jmst.2020.07.017 ↗
14. In-situ EBSD investigation of excellent strength-ductility synergy mechanism achieved by thermal-mechanical processing of Al0·25FeCoNiV high-entropy alloy10.1016/j.msea.2024.146581 ↗
15. Calculation and construction of deformation mechanism maps and processing maps for CoCrFeMnNi and Al0.5CoCrFeMnNi high-entropy alloys10.1016/j.jallcom.2021.159256 ↗
16. In-Situ EBSD investigation of how annealed twins produce excellent strength-ductility synergy in Al0.25FeCoNiV duplex high-entropy alloy10.1016/j.msea.2024.147332 ↗
17. Microstructures and mechanical properties of Cu–Ti alloys with ultrahigh strength and high ductility by thermo-mechanical treatment10.1016/j.msea.2022.142672 ↗
18. High-entropy alloys with heterogeneous microstructure: processing and mechanical properties10.1016/j.pmatsci.2020.100709 ↗
19. An overview of tailoring strain delocalization for strength-ductility synergy10.1016/j.pmatsci.2020.100675 ↗
20. Nanoprecipitate and stacking fault-induced high strength and ductility in a multiscale heterostructured high-entropy alloy10.1016/j.ijplas.2023.103853 ↗
21. Plastic strain partitioning in dual phase Al13CoCrFeNi high entropy alloy10.1016/j.msea.2018.02.044 ↗
22. Tailoring strength and ductility in dual-phase high-entropy alloys: insights from deep learning molecular dynamics simulation on FCC/BCC thickness ratios10.1016/j.jmrt.2024.11.067 ↗
23. Evolution of interfacial character and its influence on strain hardening in dual-phase high entropy alloys at nanoscale10.1016/j.ijplas.2021.103081 ↗
24. Molecular dynamics simulation of phase transition and crack propagation in metastable high entropy alloy
25. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗