Can point defects work to your advantage? New insights into TiO2@n-type Cu2O heterostructures
Source abstract
Abstract
Heterostructures of TiO 2 @n-type Cu 2 O are prepared using a simple and inexpensive method of electrochemical growth of copper(I) oxide on titanium foil in an alkaline environment. Structural analysis (Raman spectroscopy) reveals the presence of defective Cu 2 O and a layer of TiO 2 (anatase and rutile) on the surface of Ti. SEM analysis indicates that increasing the deposition time leads to the formation of complex multilayer Cu 2 O structures, whereas increasing the pH from 9 to 12 results in the formation of compact layers of pyramidal Cu 2 O crystals. Current measurements in a photoelectrochemical cell (PEC) under light switching conditions imply that Ti/ TiO 2 @Cu 2 O heterostructures exhibit photoactivity that increases with electrodeposition time. Kelvin probe measurements demonstrate that increasing the Cu 2 O deposition time results in a rise in the contact potential difference (CPD), which is attributed to the quantity and uniformity of the deposited oxide. XPS analysis of the Cu 2p₃/₂ and Cu LMM spectra confirms that the dominant oxidation state in the deposited layers is Cu⁺, characteristic of Cu 2 O, and analysis of the O 1 s spectrum indicates the presence of oxygen vacancies. Importantly, analysis of the PEC, Kelvin probe, and Mott-Schottky results unanimously confirms the n-type conductivity of Cu 2 O. Based on the measurements, a mechanism for carrier charge transfer between heterostructure elements is proposed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Copper-based nanomaterials and applications · Electronic and Structural Properties of Oxides · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Re defining clean hydrogen: from colors to emissions10.1149/2.F08224IF ↗
2. Solar water splitting cells10.1021/cr1002326 ↗
3. Single-crystal growth and characterization of Cu2O and CuO10.1023/A:1004690809547 ↗
4. Nanostructured copper oxide semiconductors: a perspective on materials, synthesis methods and applications10.1039/C4TC00345D ↗
5. Electronic structures of Cu2O, Cu4O3, and CuO: a joint experimental and theoretical study10.1103/PhysRevB.94.245418 ↗
6. P-Type and n-type Cu2O semiconductor thin films: controllable preparation by simple solvothermal method and photoelectrochemical properties10.1016/j.electacta.2010.12.054 ↗
7. Investigation of n-type Cu2O layers prepared by a low cost chemical method for use in photo-voltaic thin film solar cells10.1016/S0960-1481(01)00157-4 ↗
8. Photocurrent enhancement of n-type Cu2O electrodes achieved by controlling dendritic branching growth10.1021/ja806370s ↗
9. Electrodeposition of n-type cuprous oxide thin films10.1149/1.2830690 ↗
10. n-Type conductivity of CuO thin films by metal doping10.1016/j.apsusc.2017.12.004 ↗
11. Electrochemical photolysis of water at a semiconductor electrode10.1038/238037a0 ↗
12. An overview of photocells and photoreactors for photoelectrochemical water splitting10.1016/j.ijhydene.2010.02.133 ↗
13. Photoluminescence spectroscopy of cuprous oxide: bulk crystal versus crystalline films
14. Electrodeposited Cu2O as photoelectrodes with controllable conductivity type for solar energy conversion10.1021/acs.jpcc.5b07276 ↗
15. Undoped n -type Cu2O: fact or fiction?10.1021/jz100962n ↗
16. Elucidating the conductivity-type transition mechanism of p-Type Cu2O films from electrodeposition10.1149/1.3125800 ↗
17. p H -dependence of conduction type in cuprous oxide synthesized from solution10.1063/1.3452383 ↗
18. Surface photovoltage measurements on a particle tandem photocatalyst for overall water splitting10.1021/acs.nanolett.7b04020 ↗
19. Nickel oxide particles catalyze photochemical hydrogen evolution from water-nanoscaling promotes p-type character and minority carrier extraction10.1021/acsnano.5b00435 ↗
20. Highly conversion efficiency of solar water splitting over p-Cu2O/ZnO photocatalyst grown on a metallic substrate10.1016/j.jcat.2019.04.045 ↗
21. Haynes · 2014
22. Electrochemical deposition and microstructure of copper (I) oxide films10.1016/S1359-6462(98)00091-8 ↗
23. Photoelectrochemical stability of electrodeposited Cu2O films10.1021/jp103437y ↗
24. Vibrational properties of CuO and Cu4O3 from first-principles calculations, and raman and infrared spectroscopy10.1021/jp303096m ↗
25. H. Solache-Carranco, G. Juarez-Diaz, M. Galvan-Arellano, J. Martinez-Juarez, G. Romero-Paredes R., R. Pena-Sierra, Raman scattering and photoluminescence studies on Cu2O, in: 2008 5th Int. Conf. Electr. Eng. Comput. Sci. Autom. Control, IEEE, 2008: pp. 421–424. https://doi.org/10.1109/ICEEE.2008.4723375.10.1109/ICEEE.2008.4723375 ↗
26. Comprehensive interfacial study of potentio-dynamically synthesized copper oxide thin films for photoelectrochemical applications10.1149/2.0971606jes ↗
27. In-situ synchrotron far infrared spectroscopy of surface films on a copper electrode in aqueous solutions10.1016/S0022-0728(97)00609-8 ↗
28. Correlation of intrinsic point defects and the Raman modes of cuprous oxide10.1103/PhysRevB.90.045203 ↗
29. Catalogue of 45 reference Raman spectra of minerals concerning research in art history or archaeology, especially on corroded metals and coloured glass10.1016/S1386-1425(03)00069-6 ↗
30. Nano-structured CuO-Cu2O complex thin film for application in CH3NH3PbI3 perovskite solar cells10.1186/s11671-016-1621-4 ↗
31. Grain size tuning of nanostructured Cu2O films through vapour phase supersaturation control and their characterization for practical applications10.1063/1.4932087 ↗
32. Mechanism of titanium electrochemical oxidation via isotopic labeling, high resolution ion depth profiling, and impedance spectroscopy10.1016/j.electacta.2022.141342 ↗
33. Vibrational properties of CuO and Cu4O3 from first-principles calculations, and Raman and infrared spectroscopy10.1021/jp303096m ↗
34. TiO2@Cu2O n-n type heterostructures for photochemistry10.3390/ma14133725 ↗
35. Surface photovoltage measurements on a particle tandem photocatalyst for overall water splitting10.1021/acs.nanolett.7b04020 ↗
36. Recommended values of clean metal surface work functions
37. Fermi level, work function and vacuum level10.1039/C5MH00160A ↗
38. Work function of TiO2 (Anatase, Rutile, and Brookite) single crystals: effects of the environment10.1021/acs.jpcc.0c10519 ↗
39. High performance of nanostructured Cu2O-based photodetectors grown on a Ti/Mo metallic substrate10.3390/catal13071145 ↗
40. Study on the electronic and structural properties of oxidized copper films10.1063/5.0105281 ↗
41. Effect of work-function and morphology of heterostructure components on CO2 reduction photo-catalytic activity of MoS2-Cu2O heterostructure10.1016/j.cej.2021.132709 ↗
42. The photoelectric threshold, work function, and surface barrier potential of single-crystal cuprous oxide10.1002/pssa.2210260210 ↗
43. Effect of electrode material on the resistance switching of Cu2O film10.1063/1.2822403 ↗
44. Facet-dependent electrical conductivity properties of Cu2O crystals10.1021/acs.nanolett.5b00150 ↗
45. Surface and Defect States in Semiconductors Investigated by Surface Photovoltage
46. TiO2 nanostructures for photoelectrochemical cells (PECs)10.1016/j.ijhydene.2015.01.103 ↗
47. W.F. Stickle, P.E. Sobol, K.D. Bomben, Handbook of X-ray Photoelectron Spectroscopy, n.d.
48. Advanced analysis of copper X-ray photoelectron spectra10.1002/sia.6239 ↗
49. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Sc, Ti, V, Cu and Zn10.1016/j.apsusc.2010.07.086 ↗
50. Studies of copper valence states with Cu L3 x-ray-absorption spectroscopy10.1103/PhysRevB.39.1541 ↗
51. Interpretation of oxygen 1s X-ray photoelectron spectroscopy of ZnO10.1021/acs.chemmater.3c00801 ↗
52. On the wrong assignment of the XPS O1s signal at 531–532 eV attributed to oxygen vacancies in photo- and electro-catalysts for water splitting and other materials applications10.1016/j.susc.2021.121894 ↗
53. Photoelectron spectroscopy study of stoichiometric and reduced anatase TiO2 (101) surfaces: the effect of subsurface defects on water adsorption at near-ambient pressures10.1021/acs.jpcc.5b02732 ↗
54. Understanding the roles of oxygen vacancies in hematite-based photoelectrochemical processes10.1002/anie.201810583 ↗
55. Anomalous L3/L2 white-line ratios in the 3d transition metals10.1103/PhysRevLett.45.397 ↗
56. Reduction and oxidation of Cu species in Cu-faujasites studied by IR spectroscopy10.3390/molecules25204765 ↗
57. Photoelectrochemical activity of the nanostructured electrodes based on the SnO2/SnS2 – Heterojunction type II vs S-scheme mechanism10.1016/j.apsusc.2022.155201 ↗
58. Surface and interface properties of TiO2/CuO thin film bilayers deposited by rf reactive magnetron sputtering10.1016/j.apsusc.2023.156394 ↗
59. Heterojunction photocatalysts10.1002/adma.201601694 ↗
60. Photoelectrochemical water splitting with p-type metal oxide semiconductor photocathodes10.1002/cssc.201802596 ↗
61. p–n Heterojunction photoelectrodes composed of Cu2O-loaded TiO2 nanotube arrays with enhanced photoelectrochemical and photoelectrocatalytic activities10.1039/c3ee24162a ↗
62. Copper oxide thin films as components for heterojunction formation with TiO2 for photocatalytic CO2 reduction10.1016/j.cattod.2024.114890 ↗
63. Cu2O/TiO2 heterostructures for CO2 reduction through a direct Z-scheme: protecting Cu2O from photocorrosion10.1016/j.apcatb.2017.05.058 ↗
64. n-Type conductivity of Cu2O thin film prepared in basic aqueous solution under hydrothermal conditions10.1007/s13391-018-0047-9 ↗
65. Methods for improving n-type photoconductivity of electrodeposited Cu2O thin films10.1088/0268-1242/29/7/075012 ↗
66. Electrodeposition of Cu2O: growth, properties, and applications10.1007/s10008-017-3660-x ↗
67. Surface and interface engineering for photoelectrochemical water oxidation10.1016/j.joule.2017.08.004 ↗
68. Semiconductor-based photocatalysts and photoelectrochemical cells for solar fuel generation: a review10.1039/C4CY00974F ↗
69. Interface design, surface-related properties, and their role in interfacial electron transfer. Part I: materials-related topics
70. Oxide nanomaterials for photoelectrochemical hydrogen energy sources