journal article·2025-05Open access

Development of low-cost Ti alloys with a balanced strength and ductility with generation of ultra-fine microstructures

Zhiyi Zou, Matthew K. Dunstan, Brandon McWilliams, Stuart Robertson, Richard Hague, Marco Simonelli

Abstract

This study aims to understand the interplay between strength and ductility in metastable β-Ti alloys based on eutectoid and neutral elements. A low-cost ternary Ti-7Cr-4Sn alloy was prepared by furnace cooling from the single β region at the end of the primary processing. Although isothermal ω, a nano-precipitation generally considered to embrittle the material, is present in the obtained ultra-fine microstructure, the material still exhibits a balanced strength and ductility, with a yield stress of 1067 MPa and elongation of about 10%. The obtained tensile properties surpass traditional primary processed Ti-6Al-4V, and are comparable to a range of expensive commercial high-strength aerospace Ti alloys. Multiple microstructural features, including grain boundary α (α GB ), short rod shape primary α (α P ), isothermal ω (ω iso ) and ω assisted secondary α (α s ) are characterised within the room temperature microstructure. Microstructural analysis reveals that strong Cr segregation in the β phase and slight partitioning of Sn between the α and β phase strengthens the β phase while also preserving ductility in the alloy. This results in a microstructure dominated by the ductile α phase and sub-micron α grain boundaries. This study also discusses the evolution of these microstructural features during different stages of cooling from β matrix, substantiating a promising alloy design strategy for affordable high-performance new Ti alloys.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. High-strength titanium alloys for aerospace engineering applications: a review on melting-forging process10.1016/j.msea.2022.143260 ↗
2. Making a low-cost duplex titanium alloy ultra-strong and ductile via interstitial solutes10.1016/j.actamat.2022.118411 ↗
3. Donachie · 2000
4. Development of low-cost titanium alloys: A chronicle of challenges and opportunities
5. A review of microstructure and texture evolution during plastic deformation and heat treatment of β-Ti alloys10.1016/j.jallcom.2021.163242 ↗
6. Titanium alloy production technology, market prospects and industry development10.1016/j.matdes.2010.09.011 ↗
7. High strength and ductility in low-cost Ti–Al–Fe–Mn alloy exhibiting transformation-induced plasticity10.1016/j.msea.2019.138813 ↗
8. Hierarchical nano-martensite-engineered a low-cost ultra-strong and ductile titanium alloy10.1038/s41467-022-33710-1 ↗
9. A strengthening strategy for metastable β titanium alloys: synergy effect of primary α phase and β phase stability10.1016/j.msea.2022.143736 ↗
10. A new α + β Ti-alloy with refined microstructures and enhanced mechanical properties in the as-cast state10.1016/j.scriptamat.2021.114260 ↗
11. ω-Assisted refinement of α phase and its effect on the tensile properties of a near β titanium alloy10.1016/j.jmst.2019.10.031 ↗
12. Phase transformation in titanium alloys: A review10.1016/S1003-6326(24)66597-0 ↗
13. Achieving high strength-ductility synergy in a hierarchical structured metastable β-titanium alloy using through-transus forging10.1016/j.jmrt.2021.02.012 ↗
14. Fabrication of highly heterogeneous precipitate microstructure in an α/β titanium alloy10.1016/j.actamat.2024.120302 ↗
15. Achieving super-high strength and acceptable plasticity for a near β-type Ti-4.5Mo-5.1Al-1.8Zr-1.1Sn-2.5Cr-2.9Zn alloy through manipulating hierarchical microstructure10.1016/j.msea.2021.141907 ↗
16. Influence of cooling rate on ω phase precipitation and deformation mechanism of a novel metastable β titanium alloy10.1016/j.msea.2021.142151 ↗
17. Enhanced mechanical properties in metastable β titanium alloy via ω-assisted nucleation10.1016/j.msea.2022.144082 ↗
18. Study on ω-assisted α nucleation behavior of metastable β-Ti alloys from phase transformation mechanism10.1016/j.jallcom.2021.161686 ↗
19. The indirect influence of the ω phase on the degree of refinement of distributions of the α phase in metastable β-Titanium alloys10.1016/j.actamat.2015.09.053 ↗
20. Role of ω phase in the formation of extremely refined intragranular α precipitates in metastable β-titanium alloys10.1016/j.actamat.2015.11.020 ↗
21. to ω transformation strain associated with the precipitation of α phase in a metastable β titanium alloy10.1007/s10853-020-05231-z ↗
22. Observation of α phase nucleation within ω precipitates with novel orientation relationship in a low misfit metastable β-Ti alloy through EBSD10.1016/j.scriptamat.2024.116335 ↗
23. β Phase decomposition in Ti–5Al–5Mo–5V–3Cr10.1016/j.actamat.2009.04.031 ↗
24. The effect of precursory α and ω phase on microstructure evolution and tensile properties of metastable β titanium alloy10.1016/j.jmrt.2021.12.066 ↗
25. Role of nanosized intermediate phases on α precipitation in a high-strength near β titanium alloy10.1016/j.matlet.2020.128147 ↗
26. Effect of aging on tensile and fracture behavior of a metastable Ti-15 V–3Cr–3Al–3Sn β-titanium alloy10.1016/j.jallcom.2024.175803 ↗
27. Correlation between alpha phase morphology and tensile properties of a new beta titanium alloy10.1016/j.matdes.2017.02.043 ↗
28. A review of the metastable omega phase in beta titanium alloys: the phase transformation mechanisms and its effect on mechanical properties10.1080/09506608.2022.2036401 ↗
29. Influence of isothermal omega precipitation aging on deformation mechanisms and mechanical properties of a β-type Ti-Nb alloy10.1016/j.jallcom.2022.167309 ↗
30. Effects of Cr and Sn additives on the martensitic transformation and deformation behavior of Ti-Cr-Sn biomedical shape memory alloys10.1016/j.msea.2021.141668 ↗
31. A β-titanium alloy with extra high strain-hardening rate: Design and mechanical properties10.1016/j.scriptamat.2015.11.020 ↗
32. Enhancement of the shape memory effect by the introductions of Cr and Sn into the β–Ti alloy towards the biomedical applications10.1016/j.jallcom.2021.160088 ↗
33. Why is neutral tin addition necessary for biocompatible β-titanium alloys?–Synergistic effects of suppressing ω transformations10.1016/j.actamat.2024.119968 ↗
34. Titanium-Based alloys and composites for orthopedic implants applications: a comprehensive review10.1016/j.matdes.2024.112850 ↗
35. A review on high-strength titanium alloys: microstructure, strengthening, and properties10.1002/adem.201801359 ↗
36. S.M. Market, Shanghai Metals Market, in.
37. L.M. Exchange, London Metal Exchange, in.
38. Sn-Ti (Tin-Titanium)10.1007/s11669-010-9663-2 ↗
39. Modelling strengthening mechanisms in beta-type Ti alloys10.1016/j.msea.2019.04.027 ↗
40. Identification of an affordable and printable metastable β Ti alloy with outstanding deformation behaviour for use in laser powder bed fusion10.1016/j.msea.2024.146619 ↗
41. I · 2016
42. Polmear · 2005
43. Lütjering · 2007
44. Properties and processing ofTIMETAL LCB10.1361/105994905X75637 ↗
45. Welsch · 1993
46. Thermomechanical processing of beta titanium alloys—an overview10.1016/S0921-5093(97)00783-1 ↗
47. A review on heat treatment efficiency in metastable β titanium alloys: the role of treatment process and parameters10.1016/j.jmrt.2020.10.088 ↗
48. Role of omega phase evolution in plastic deformation of twinning-induced plasticity β Ti–12V–2Fe–1Al alloy10.1016/j.matdes.2019.108282 ↗
49. Microstructural engineering of a dual-phase Ti-Al-V-Fe alloy via in situ alloying during laser powder bed fusion
50. In situ tailoring microstructure in additively manufactured Ti-6Al-4V for superior mechanical performance10.1016/j.actamat.2016.12.027 ↗
51. Effect of heat treatment on the tensile behavior of selective laser melted Ti-6Al-4V by in situ X-ray characterization10.1016/j.actamat.2020.03.003 ↗
52. Change in the deformation mode resulting from beta-omega compositional partitioning in a TiMo alloy: Room versus elevated temperature10.1016/j.scriptamat.2016.11.013 ↗
53. Mechanism of stress relaxation and phase transformation in additively manufactured Ti-6Al-4V via in situ high temperature XRD and TEM analyses10.1016/j.actamat.2020.02.056 ↗
54. Early stages of microstructure and texture evolution during beta annealing of Ti-6Al-4V
55. The role of lattice defects, element partitioning and intrinsic heat effects on the microstructure in selective laser melted Ti-6Al-4V10.1016/j.actamat.2019.01.039 ↗
56. Variant selection of grain boundary α by special prior β grain boundaries in titanium alloys10.1016/j.actamat.2014.05.003 ↗
57. On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium10.1016/S0031-8914(34)80244-3 ↗
58. Crystallographic variant selection in Ti–6Al–4V10.1016/j.actamat.2004.07.034 ↗
59. Effect of self-accommodation on α/α boundary populations in pure titanium10.1016/S1359-6454(03)00035-1 ↗
60. Strong and ductile titanium–oxygen–iron alloys by additive manufacturing10.1038/s41586-023-05952-6 ↗
61. The vertical and triangular morphology in the as-deposited Ti-6Al-4V10.1016/j.matchar.2017.07.012 ↗
62. Phase stability and stress-induced transformations in beta titanium alloys10.1007/s11837-015-1411-y ↗
63. The effect of aluminium on twinning in binary alpha-titanium10.1016/j.actamat.2015.09.048 ↗
64. Effect of grain size on twinning behavior of pure titanium at room temperature10.1016/j.msea.2021.142060 ↗
65. Effect of grain boundary alpha on mechanical properties of Ti5.4Al3Mo1V Alloy10.1007/s11837-015-1443-3 ↗
66. The development of ultrafine grain structure in an additively manufactured titanium alloy via high-temperature microscopy10.1016/j.mtla.2023.101856 ↗
67. Formation of α-Widmanstätten structure: effects of grain size and cooling rate on the Widmanstätten morphologies and on the mechanical properties in Ti6Al4V alloy10.1016/S0925-8388(01)01571-7 ↗
68. Microstructure and tensile properties of additive manufactured Ti-6Al-4V with refined prior-β grain structure obtained by rapid heat treatment10.1016/j.msea.2021.141271 ↗