journal article·2025-05

Defect-driven relaxation of nanostructured Cu examined by in situ heating high-energy synchrotron X-ray microbeam diffraction

Isshu Lee, Laxman Bhatta, Donghua Xu, Malte Blankenburg, Ulrich Lienert, Klaus-Dieter Liss, Megumi Kawasaki

Publisher page

Abstract

Bulk nanostructured metals introduced by severe plastic deformation contain an excess of lattice defects. A nanostructured copper (Cu) processed by a high-pressure torsion technique was examined during in situ heating to investigate microstructural relaxation and quantify the evolution of microstructural parameters using high- energy synchrotron microbeam X-ray diffraction. While general microstructural relaxations, such as recovery, recrystallization, and subsequent grain growth, were observed, the key microstructural parameters, including grain size, microstrain, dislocation density, and thermal expansion coefficient, and their changes at critical temperatures were uniquely described and quantified through diffraction data. Based on this analysis, the stored energies driving thermally activated microstructural changes were estimated for individual defect types — grain boundaries, dislocations, and vacancies — that are expected to significantly influence the relaxation behavior of nanostructured Cu. This study demonstrates the effectiveness of diffraction characterization techniques for gaining a comprehensive understanding of the thermal stability of bulk nanostructured materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Grain boundaries in ultrafine grained materials processed by severe plastic deformation and related phenomena10.1016/j.msea.2012.01.080 ↗
2. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
3. Lattice defect investigation of ECAP-Cu by means of X-ray line profile analysis, calorimetry and lectrical resistometry10.1016/j.msea.2005.08.070 ↗
4. The development of vacancies during severe plastic deformation10.2320/matertrans.MF201937 ↗
5. Defect microstructure evolution in an immiscible composite Cu43% Cr alloy after high-pressure torsion and annealing using positron annihilation spectroscopy
6. Thermal stability of nanocrystalline materials: thermodynamics and kinetics10.1080/09506608.2016.1257536 ↗
7. Universal plot for hardness variation in pure metals processed by high-pressure torsion10.2320/matertrans.M2009431 ↗
8. Recrystallization of bulk nanostructured magnesium alloy AZ31 after severe plastic deformation: an in situ diffraction study10.1007/s10853-023-09250-4 ↗
9. Microstructure instability in cryogenically deformed copper10.1016/j.scriptamat.2010.07.005 ↗
10. The significance of self-annealing at room temperature in high purity copper processed by high-pressure torsion10.1016/j.msea.2016.01.027 ↗
11. Microstructure changes in HPT-processed copper occurring at room temperature10.1016/j.matchar.2019.03.046 ↗
12. Microstructural stability of Cu processed by different routes of severe plastic deformation10.1016/j.msea.2010.11.026 ↗
13. High temperature thermal stability of pure copper and copper-carbon nanotube composites consolidated by High Pressure Torsion10.1016/j.compositesa.2013.04.007 ↗
14. Evolution of defects in copper deformed by high-pressure torsion10.1016/j.actamat.2010.12.028 ↗
15. Microstructure and mechanical properties of pure Cu processed by high-pressure torsion10.1016/j.msea.2008.06.039 ↗
16. Copper and copper oxide nanoparticles in a cellulose support studied using anomalous small-angle X-ray scattering10.1140/epjd/e2007-00015-y ↗
17. Thermal expansion of copper from 20 to 800 K—standard reference material 73610.1063/1.1658614 ↗
18. Characterization of nanocrystalline materials by x-ray line profile analysis10.1007/s10853-006-0696-1 ↗
19. X-ray line profile analysis—an ideal tool to quantify structural parameters of nanomaterials10.1007/s11837-011-0115-1 ↗
20. III. Dislocation densities in some annealed and cold-worked metals from measurements on the x-ray debye-scherrer spectrum10.1080/14786435608238074 ↗
21. Strengthening during heat treatment of HPT processed copper and nickel10.1016/j.msea.2018.11.010 ↗
22. Review of thermal stability of nanomaterials10.1007/s10853-013-7836-1 ↗
23. Stability of ultra-fine and nano-grains after severe plastic deformation: a critical review10.1007/s10853-021-06274-6 ↗
24. Rapid heating induced ultrahigh stability of nanograined copper10.1126/sciadv.aaz8003 ↗
25. Synchrotron high-energy x-ray & neutron diffraction, and laser-scanning confocal microscopy: in-situ characterization techniques for bulk nanocrystalline metals10.2320/matertrans.MT-MF2022022 ↗
26. N.J. Simon, E.S. Drexler, R.P. Reed, Properties of copper and copper alloys at cryogenic temperatures. Final report, United States, 1992. https://doi.org/10.2172/5340308.10.2172/5340308 ↗
27. The stored energy of cold work10.1016/0079-6425(73)90001-7 ↗
28. Reduction of vacancy concentration during storage of severely deformed Cu10.1016/j.msea.2010.05.088 ↗
29. Enhanced thermal stability of nanograined metals below a critical grain size10.1126/science.aar6941 ↗
30. Influence of microstructure on thermal stability of ultrafine-grained Cu processed by equal channel angular pressing10.1007/s10853-018-2548-1 ↗
31. Vacancies and their complexes in FCC metals10.1134/S1063783407060108 ↗
32. Lattice distortion around a vacancy in magnesium10.1103/PhysRevB.18.6738 ↗
33. In situ neutron diffraction investigating microstructure and texture evolution upon heating of nanostructured CoCrFeNi high-entropy alloy
34. Free volumes in bulk nanocrystalline metals studied by the complementary techniques of positron annihilation and dilatometry10.1016/j.physb.2012.01.090 ↗
35. Vacancy production during plastic deformation in copper determined by in situ x-ray diffraction10.1016/j.msea.2006.03.156 ↗
36. Vacancies in plastically deformed copper10.1515/ijmr-2005-0180 ↗