journal article·2025-04Open access

Superior strength-ductility synergy of FeMnCrNiAlSi high entropy alloy with heterogeneous structures

Yingchao Li, Xi Jin, Aidong Lan, Junwei Qiao

Abstract

Alloys with excellent strength-ductility synergy and cost-effective performance have always been the pursuit of materials for engineering applications. In this study, Fe 40 Mn 20 Cr 10 Ni 20 Al 5 Si 5 (at%) dual-phase high-entropy alloy with tensile strength of 1060 MPa and elongation of 26 % was developed. The precipitated Ni(Al, Mn) B2 phase was selected to strengthen the alloy, and the combination of soft and hard phases provides a strong work-hardening capability. The dual heterogeneous structure, consisting of partially recrystallized and precipitated phases, overcomes the strength and plasticity trade-off at room temperature. For the heterogeneous structures, the mixing law is applied to calculate the flow stress, revealing additional strengthening components from dislocation hardening, precipitation hardening , and back-stress hardening. Our results demonstrate the possibility of synergistic enhancement of mutually exclusive properties such as strength-plasticity of alloys through nano-precipitation and heterostructures , providing new insights into the preparation of high-strength and high-plasticity alloys.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (86)

Show source-provided references
1. Strategies for improving the sustainability of structural metals10.1038/s41586-019-1702-5 ↗
2. Tailoring heterogeneities in high-entropy alloys to promote strength–ductility synergy10.1038/s41467-019-13311-1 ↗
3. High-entropy Al0.3CoCrFeNi alloy fibers with high tensile strength and ductility at ambient and cryogenic temperatures10.1016/j.actamat.2016.10.038 ↗
4. Enhancing mechanical properties of Al0.25CoCrFeNi high-entropy alloy via cold rolling and subsequent annealing10.1016/j.jallcom.2020.154645 ↗
5. Strategies for improving the sustainability of structural metals10.1016/j.msea.2003.10.257 ↗
6. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
7. Predict the phase formation of high-entropy alloys by compositions10.1016/j.jmrt.2022.12.143 ↗
8. A critical review of the mechanical properties of CoCrNi-based medium-entropy alloys
9. Heterostructured materials10.1016/j.pmatsci.2022.101019 ↗
10. Designing structures with combined gradients of grain size and precipitation in high entropy alloys for simultaneous improvement of strength and ductility10.1016/j.actamat.2022.117847 ↗
11. Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range10.1016/j.actamat.2016.11.016 ↗
12. Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure10.1016/j.actamat.2018.12.012 ↗
13. Ultrahigh strength and ductility in newly developed materials with coherent nanolamellar architectures10.1038/s41467-020-20109-z ↗
14. Hierarchical precipitates, sequential deformation-induced phase transformation, and enhanced back stress strengthening of the micro-alloyed high entropy alloy10.1016/j.actamat.2022.117974 ↗
15. The B2 phase-driven microstructural heterogeneities and twinning enable ultrahigh cryogenic strength and large ductility in NiCoCr-based medium-entropy alloy10.1016/j.actamat.2022.117981 ↗
16. Enhancing strength and strain hardenability via deformation twinning in fcc-based high entropy alloys reinforced with intermetallic compounds10.1016/j.actamat.2018.12.010 ↗
17. Local chemical order enables an ultrastrong and ductile high-entropy alloy in a cryogenic environment10.1126/sciadv.adq6398 ↗
18. The effect of Si addition on the heterogeneous grain structure and mechanical properties of CrCoNi medium entropy alloy10.1016/j.msea.2022.143655 ↗
19. Cryogenic deformation strengthening mechanisms in FeMnSiNiAl high-entropy alloys10.1016/j.actamat.2024.120554 ↗
20. Achieving superior combined cryogenic strength and ductility in a high-entropy alloy via the synergy of low stacking fault energy and multiscale heterostructure10.1016/j.scriptamat.2023.115809 ↗
21. Metalloid substitution elevates simultaneously the strength and ductility of face-centered-cubic high-entropy alloys10.1016/j.actamat.2021.117571 ↗
22. Deformation behavior of Fe40Mn20Cr20Ni20 medium-entropy alloy10.3390/met14010032 ↗
23. Dynamic tension and constitutive model in Fe40Mn20Cr20Ni20 high-entropy alloys with a heterogeneous structure10.1016/j.msea.2022.142837 ↗
24. Deformation mechanisms of the Fe40Mn20Cr20Ni20 high entropy alloy upon dynamic tension10.1016/j.msea.2024.146583 ↗
25. A novel cobalt-free FeMnCrNi medium-entropy alloy with exceptional yield strength and ductility at cryogenic temperature10.1016/j.jallcom.2020.153981 ↗
26. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗
27. Non-equiatomic FeMnCrNiAl high-entropy alloys with heterogeneous structures for strength and ductility combination10.1016/j.msea.2021.141386 ↗
28. Effects of aluminum on microstructure and compressive properties of Al-Cr-Fe-Ni eutectic multi-component alloys10.1016/j.msea.2016.11.019 ↗
29. Effect of al content on the microstructure and mechanical behavior of two-phase FeNiMnAl alloys10.1007/s10853-013-7884-6 ↗
30. Novel ultra-high-strength (ferrite+austenite) duplex lightweight steels achieved by fine dislocation substructures (taylor lattices), grain refinement, and partial recrystallization10.1016/j.actamat.2015.06.024 ↗
31. Improvement of strength – ductility balance of B2-strengthened lightweight steel10.1016/j.actamat.2020.03.022 ↗
32. Promoting strength–ductility synergy by mitigating heterogeneity in precipitation-strengthened FCC/B2 dual-phase high-entropy alloy10.1016/j.ijplas.2024.104213 ↗
33. Affordable FeCrNiMnCu high entropy alloys with excellent comprehensive tensile properties10.1016/j.intermet.2016.06.011 ↗
34. Development of high-strength Co-free high-entropy alloys hardened by nanosized precipitates10.1016/j.scriptamat.2018.01.028 ↗
35. In-situ study of crack initiation and propagation in a dual phase AlCoCrFeNi high entropy alloy10.1016/j.jallcom.2017.03.307 ↗
36. Superior fracture toughness with high yield strength in a high-Mn steel induced by heterogeneous grain structure10.1016/j.matdes.2022.111473 ↗
37. Die-cast multicomponent near-eutectic and hypoeutectic Al–Si–Ni–Fe–Mn alloys: Microstructures and mechanical properties10.1016/j.msea.2023.144977 ↗
38. Achieving ultra-high mechanical properties in metastable Co-free medium entropy alloy via hierarchically heterogeneous microstructure10.1016/j.jmst.2023.10.022 ↗
39. Crystallographically degenerate B2 precipitation in a plastically deformed fcc-based complex concentrated alloy10.1080/21663831.2018.1426649 ↗
40. Cr-promoted formation of B2+L21 composite nanoprecipitates and enhanced mechanical properties in ferritic alloy10.1016/j.actamat.2022.118506 ↗
41. Atom probe tomography study of Fe-Ni-Al-Cr-Ti ferritic steels with hierarchically-structured precipitates10.1016/j.actamat.2017.11.013 ↗
42. The B2 phase-driven microstructural heterogeneities and twinning enable ultrahigh cryogenic strength and large ductility in NiCoCr-based medium-entropy alloy10.1016/j.actamat.2022.117981 ↗
43. Direct observation of lomer-cottrell locks during strain hardening in nanocrystalline nickel by in situ TEM10.1038/srep01061 ↗
44. The Deformation and Ageing of Mild Steel: III Discussion of Results10.1088/0370-1301/64/9/303 ↗
45. Low-density Fe40Mn19Ni15Al15Si10C1 high entropy steel processed by mechanical alloying and spark plasma sintering: Phase evolution, microstructure and mechanical properties10.1016/j.msea.2023.144776 ↗
46. Twinning-induced plasticity (TWIP) steels
47. Temperature-dependent hardening contributions in CrFeCoNi high-entropy alloy10.1016/j.actamat.2021.117371 ↗
48. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
49. III. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-scherrer spectrum10.1080/14786435608238074 ↗
50. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
51. Excellent strength-ductility combination in Co36Cr15Fe18Ni18Al8Ti4Mo1 multi-principal element alloys by dual-morphology B2 precipitates strengthening10.1016/j.jmst.2022.07.002 ↗
52. Realizing strength-ductility combination of coarse-grained Al0.2Co1.5CrFeNi1.5Ti0.3 alloy via nano-sized, coherent precipitates10.1016/j.ijplas.2017.10.005 ↗
53. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
54. Shock compression and spallation of a medium-entropy alloy Fe40Mn20Cr20Ni2010.1016/j.msea.2022.143311 ↗
55. On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress10.1016/S1359-6454(99)00222-0 ↗
56. The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe–Mn–Al–Si steels during tensile deformation10.1016/j.actamat.2015.08.030 ↗
57. Thermal activation parameters of plastic flow reveal deformation mechanisms in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2017.10.014 ↗
58. Superior strength-ductility synergy and strain hardenability of Al/Ta co-doped NiCoCr twinned medium entropy alloy for cryogenic applications10.1016/j.actamat.2021.117288 ↗
59. Synergistic deformation pathways in a TWIP steel at cryogenic temperatures: In situ neutron diffraction10.1016/j.actamat.2020.09.075 ↗
60. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
61. A General Mechanism of Martensitic Nucleation= Part I. General Concepts and the FCC HCP Transformation
62. Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe–Mn–C alloys10.1016/j.msea.2004.01.059 ↗
63. Direct estimation of stacking fault energy by thermodynamic analysis10.1002/pssa.2210360233 ↗
64. Thermodynamic modeling of the stacking fault energy of austenitic steels10.1016/j.actamat.2010.10.037 ↗
65. The influence of aluminium content to the stacking fault energy in Fe-Mn-Al-C alloy system10.1007/BF01045392 ↗
66. Sgte data for pure elements10.1016/0364-5916(91)90030-N ↗
67. The role of magnetism in the calculation of phase diagrams10.1016/0378-4363(81)91004-4 ↗
68. Low-cycle fatigue life and plasticity mechanisms of a Fe−15Mn−10Cr−8Ni−4Si seismic damping alloy under cyclic loading at various temperatures10.1016/j.actamat.2021.117267 ↗
69. Stacking fault energy and fcc→hcp transformation driving force in Fe-Mn-C-Cr-Si high manganese steels and experimental investigation10.1088/2053-1591/ac1c34 ↗
70. Effect of Alloying Elements on Stability of Epsilon Iron10.2320/matertrans1960.15.225 ↗
71. The origin of negative stacking fault energies and nano-twin formation in face-centered cubic high entropy alloys10.1016/j.scriptamat.2016.11.014 ↗
72. Effect of nitrogen on stacking fault energy of F.C.C. iron-based alloys10.1016/S1359-6454(98)00419-4 ↗
73. Stacking fault energy maps of Fe–Mn–Al–C–Si steels: effect of temperature, grain size, and variations in compositions10.1115/1.4033632 ↗
74. The formation of Hcp and Bcc phases in austenitic iron alloys10.1007/BF02814874 ↗
75. A thermodynamic analysis of the Ni-Al system10.1016/S0966-9795(97)00099-X ↗
76. Study on tensile and thermal fatigue behaviors of additively manufactured cobalt-based alloys alloying with Al and Ni10.1016/j.msea.2022.142914 ↗
77. Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate10.1016/j.actamat.2010.05.049 ↗
78. Thermodynamic modeling of the Al–Cr system10.1016/j.jallcom.2007.06.046 ↗
79. Stacking fault energies in austenitic stainless steels10.1016/j.actamat.2016.03.042 ↗
80. Theory of dislocations10.1016/0502-8205(53)90018-5 ↗
81. Unusual deformation mechanisms evoked by hetero-zone interaction in a heterostructured FCC high-entropy alloy10.1016/j.actamat.2024.120516 ↗
82. Partially recrystallized heterostructure via Mo-doping endows CoCrNi medium-entropy alloy with exceptional strength and ductility10.1016/j.scriptamat.2024.116297 ↗
83. Contrasting mechanical behavior in precipitation hardenable AlXCoCrFeNi high entropy alloy microstructures: Single phase FCC vs. dual phase FCC-BCC10.1016/j.msea.2018.10.021 ↗
84. Tensile deformation behavior and mechanical properties of a bulk cast Al0.9CoFeNi2 eutectic high-entropy alloy10.1016/j.jmst.2020.05.053 ↗
85. Achieving excellent elevated-temperature mechanical properties in dual-phase high-entropy alloys via nanoscale co-precipitation and heterostructure engineering10.1016/j.actamat.2024.120634 ↗
86. BCC-FCC interfacial effects on plasticity and strengthening mechanisms in high entropy alloys10.1016/j.actamat.2018.07.031 ↗