journal article·2025-04Open access

Creep strength of Mg-Y-Zn alloys containing long-period stacking ordered structures

Jie Wang, Gaoming Zhu, Dandan Wang, Yahui Liu, Xiaoqin Zeng, Marko Knezevic

Abstract

Magnesium (Mg) alloys reinforced with long-period stacking ordered (LPSO) structures exhibit considerable potential for achieving enhanced mechanical properties. Despite progress in understanding tensile and compressive deformation mechanisms at elevated temperatures, the comprehension of the creep behavior of these alloys under varying conditions remains incomplete. The present study investigates the creep behavior of three Mg-Y-Zn alloys containing varying contents of LPSO structures under different temperature and stress conditions. The findings reveal that at 150 °C, the LPSO phase content has an insignificant effect on the creep resistance of the alloys. However, as temperature exceeds 200 °C, the creep resistance deteriorates with increasing LPSO phase content. Notably, at higher temperatures (300 °C), the alloys exhibit superplasticity during creep deformation, which is attributed to the diffusion of solute atoms facilitated through stacking faults within the LPSO structures. A creep constitutive equation was developed for temperatures between 150℃ and 200 ℃ and stress levels of 170–230 MPa, revealing high stress exponents ( n = 7.1–8.6) and low activation energies ( Q c =80.98–90.63 kJ·mol −1 ) for the alloys. These results align with power-law dislocation creep, indicating threshold stress fields resulting from load transfer between the α-Mg matrix and the LPSO phase. After adjustment for the threshold stress, the stress exponents imply diffusional creep as the primary mechanism. The findings in this research contribute to understanding creep mechanisms in these alloys and offer insights into optimizing their performance for diverse applications. • Mg-Y-Zn alloys' creep behavior was studied across multiple temperature ranges. • LPSO phase content enhances yield strength but reduces creep resistance above 200°C. • Superplasticity occurs at 300°C due to solute diffusion in LPSO phase structures. • A high stress exponent and low activation energy suggest dislocation creep.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Applications of Magnesium Alloys in Automotive Engineering
2. Overview of advancement and development trend on magnesium alloy10.1016/j.jma.2019.08.001 ↗
3. Creep strength of magnesium-based alloys10.1007/s11661-002-0157-7 ↗
4. Separate contributions of texture and grain size on the creep mechanisms in a fine-grained magnesium alloy10.1016/j.actamat.2006.08.039 ↗
5. Tracing the effects of calcium, stannum, and zinc additions on the creep resistance of Mg–Al-based alloys10.1007/s11661-023-07050-8 ↗
6. Transition of superplastic and dislocation creep of duplex Mg–Li–Al–Zn alloy10.1016/j.msea.2023.145714 ↗
7. Tensile creep anisotropy of a Mg-2Y alloy extruded sheet with a splitted texture10.1016/j.jallcom.2020.153754 ↗
8. Creep-resistant magnesium alloys10.1016/S0921-5093(01)01290-4 ↗
9. Understanding solid solution strengthening at elevated temperatures in a creep-resistant Mg–Gd–Ca alloy10.1016/j.actamat.2019.09.058 ↗
10. The role of dislocation-solute interactions on the creep behaviour of binary Mg–RE alloys10.1038/s41598-021-82517-5 ↗
11. Understanding the high strength and good ductility in LPSO-containing Mg alloy using synchrotron X-ray diffraction10.1007/s11661-018-4881-z ↗
12. Strengthening mechanisms, hardening/softening behavior, and microstructure evolution in an LPSO magnesium alloy at elevated temperatures
13. High-temperature mechanical behavior of extruded Mg-Y-Zn alloy containing LPSO phases10.1007/s11661-013-1628-8 ↗
14. Effect of long-period stacking ordered phase on microstructure, mechanical property and corrosion resistance of Mg alloys: A review10.1016/j.pnsc.2016.03.006 ↗
15. Effect of microstructure on creep behaviour of cast Mg97Y2Zn1 (at%) alloy10.1016/j.msea.2012.01.023 ↗
16. Effect of the LPSO volume fraction on the microstructure and mechanical properties of Mg–Y2X–ZnXalloys10.1007/s10853-011-5899-4 ↗
17. Creep deformation behavior and microstructure of α-Mg/long-period stacking ordered (LPSO) duplex Mg-Y-Zn alloy prepared by hot extrusion and heat treatment
18. Highly deformable Mg–Al–Ca alloy with Al2Ca precipitates10.1016/j.actamat.2020.09.006 ↗
19. An examination of the constitutive equation for elevated temperature plasticity10.1016/S0921-5093(01)01115-7 ↗
20. Dislocation-induced plastic instability in a rare earth containing magnesium alloy10.1016/j.mtla.2021.101038 ↗
21. Effects of Ca on the formation of LPSO phase and mechanical properties of Mg-Zn-Y-Mn alloy10.1016/j.msea.2015.09.046 ↗
22. Campbell · 2008
23. A comparison of the creep properties of an Al-6092 composite and the unreinforced matrix alloy10.1007/s11661-998-0224-9 ↗
24. An interpretation of steady state creep10.1080/14786437208220352 ↗
25. Creep properties of the as-cast Al-A319 alloy: T4 and T7 heat treatment effects10.1007/s11661-016-3555-y ↗
26. The effect of Au and Ag additions on the power-law creep behavior of Pb10.1016/0001-6160(87)90142-8 ↗
27. Anisotropie d’autodiffusion du magnesium10.1016/0001-6160(71)90077-0 ↗
28. Effects of zinc on creep strength and deformation substructures in Mg–Y alloy10.1016/j.msea.2003.12.071 ↗
29. Thermodynamic modeling and diffusion kinetic experiments of binary Mg–Gd and Mg–Y systems10.1016/j.actamat.2014.02.029 ↗
30. Kassner · 2015
31. Creep behavior of Mg–11Y–5Gd–2Zn–0.5 Zr (wt%) at 573 K10.1016/j.msea.2012.03.060 ↗
32. Creep at low stresses: An evaluation of diffusion creep and Harper-Dorn creep as viable creep mechanisms10.1007/s11661-002-0087-4 ↗
33. The role of α-Mn precipitation on the creep mechanisms of Mg–Sr–Mn10.1016/j.msea.2012.07.091 ↗
34. Creep resistance in magnesium alloys10.1179/095066010X12646898728327 ↗
35. Dislocation creep behavior in Mg–Al–Zn alloys10.1016/j.msea.2005.06.059 ↗
36. The stress and temperature dependence of steady-state flow at intermediate temperatures for pure polycrystalline aluminum10.1016/0001-6160(80)90066-8 ↗
37. The effect of vacancy generation on plastic deformation10.1016/0036-9748(80)90295-1 ↗
38. Restoration mechanisms in large-strain deformation of high purity aluminum at ambient temperature and the determination of the existence of “steady-state10.1016/0956-7151(94)90420-0 ↗
39. The relation between ductility and stacking fault energies in Mg and Mg-Y alloys10.1016/j.actamat.2012.02.006 ↗
40. Constitutive modelling of transient and steady state creep behaviour of type 316LN austenitic stainless steel10.1016/j.mechmat.2019.103122 ↗
41. Critical analysis of threshold stresses in the creep mechanisms of a powder metallurgy magnesium alloy AZ3110.1007/s11661-020-05658-8 ↗
42. The relationship between microstructure and creep resistance in die-cast magnesium–rare earth alloys10.1016/j.scriptamat.2010.02.005 ↗
43. Creep behavior of Mg–10Gd–xZn (x= 2 and 6 wt%) alloys10.1016/j.msea.2015.09.113 ↗
44. A simple procedure for estimating threshold stresses in the creep of metal matrix composites10.1016/S1359-6462(97)00041-9 ↗