Coherent interface design in sintered GeO₂@Sn-MOF for high-performance lithium-ion anodes
Source abstract
Abstract
Tin-based metal-organic frameworks (Sn-MOFs) are promising anode materials but suffer from structural instability and unstable solid-electrolyte interphase (SEI), leading to capacity fading and poor cycling performance. We employ coherent interface engineering to address these issues to develop sintered GeO₂@Sn-MOF with coherent grain boundaries, enhancing structural stability, lithium-ion transport, and cycling durability. X-ray diffraction (XRD) and transmission electron microscopy (TEM) confirm the formation of stable SnO₂/GeO₂ interfaces, mitigating volume expansion and improving mechanical integrity. Electrochemical tests show that the optimized Sn-3Ge composition achieves a high initial capacity of 1968 mAh g⁻¹ at 0.1 C, excellent rate capability of 480 mAh g⁻¹ at 5 C, and superior cycling stability, retaining 77 % capacity after 500 cycles at 1 A g⁻¹ . These findings highlight the role of coherent interfaces in enhancing lithium-ion diffusion and SEI stability, offering a promising strategy for high-performance lithium-ion battery anodes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Semiconductor materials and devices · Machine Learning in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Multifunctional high-entropy materials10.1038/s41578-024-00720-y ↗
2. Fundamental understanding of the low initial coulombic efficiency in SiO(x) anode for lithium-ion batteries: mechanisms and solutions10.1002/adma.202405751 ↗
3. Spatial-dependent coupling of electrochemistry, mass transport, and stress in silicon-graphite composite electrodes for lithium-ion batteries10.1002/adfm.202413560 ↗
4. Suppressing gas swelling in self-assembled Li(4)Ti(5)O(12) (400) for high-performance rechargeable batteries10.1016/j.jcis.2023.08.021 ↗
5. Single-crystalline TiO2(B) nanobelts with unusual large exposed {100} facets and enhanced Li-storage capacity
6. Constructing the bonding between conductive agents and active materials/binders stabilizes silicon anode in Lithium-ion batteries10.1016/j.jechem.2023.01.035 ↗
7. β-SnSb for sodium ion battery anodes: phase transformations responsible for enhanced cycling stability revealed by in situ TEM10.1021/acsenergylett.8b00762 ↗
8. Unveiling critical size of coarsened Sn nanograins for achieving high round-trip efficiency of reversible conversion reaction in lithiated SnO2 nanocrystals10.1016/j.nanoen.2018.01.007 ↗
9. Sn-based intermetallic compounds for Li-ion batteries: structures, lithiation mechanism, and electrochemical performances10.1002/eem2.12016 ↗
10. Reversible formation of coordination bonds in Sn-based metal-organic frameworks for high-performance lithium storage10.1038/s41467-021-23335-1 ↗
11. Effect of NaOH molarities to the microstructure and sodium storage performance of the Sn-MOF derived SnO(2)microporous rod10.1088/1361-6528/ac1c21 ↗
12. Lattice pinning in MoO3 via coherent interface with stabilized Li+ intercalation10.1038/s41467-023-42335-x ↗
13. Enabling structural and interfacial stability of 5 V spinel LiNi0.5Mn1.5O4 cathode by a coherent interface10.1016/j.jechem.2022.09.021 ↗
14. Niobium-based oxide for anode materials for lithium-ion batteries10.1002/chem.202302865 ↗
15. Fabrication of an MOF-derived heteroatom-doped Co/CoO/carbon hybrid with superior sodium storage performance for sodium-ion batteries10.1039/C7TA03939E ↗
16. Sn-MOF@CNT nanocomposite: an efficient electrochemical sensor for detection of hydrogen peroxide10.1016/j.envres.2020.110005 ↗
17. Roles of coherent interfaces on electrochemical performance of sodium layered oxide cathodes10.1021/acs.chemmater.8b01556 ↗
18. Asynchronous domain dynamics and equilibration in layered oxide battery cathode10.1038/s41467-023-44222-x ↗
19. Layered GeSe/thermally-reduced graphene oxide composites as efficient anodes for high-performance Li-ion batteries10.1016/j.est.2023.109393 ↗
20. ZnO/ZnFe2O4/N-doped C micro-polyhedrons with hierarchical hollow structure as high-performance anodes for lithium-ion batteries10.1016/j.nanoen.2017.11.030 ↗
21. Strengthening Sn-MOF with SiO(2)/GeO(2) nanoparticles for synergistically enhanced high capacity and cycle stability10.1021/acs.langmuir.4c00689 ↗
22. Mapping inversion domain boundaries along single GaN wires with bragg coherent X-ray imaging10.1021/acsnano.0c03775 ↗
23. Unusual solute segregation phenomenon in coherent twin boundaries10.1038/s41467-021-21104-8 ↗
24. Lithiation phase behaviors of metal oxide anodes and extra capacities
25. Epoxy phenol novolac resin: a novel precursor to construct high performance hard carbon anode toward enhanced sodium-ion batteries10.1016/j.carbon.2023.01.048 ↗
26. Phase-selective defects engineering in dual-phase high entropy oxide for Li-ion storage10.1016/j.cej.2024.151113 ↗
27. Morphological instability of grain boundaries in two-phase coherent solids10.1103/PhysRevLett.114.105501 ↗
28. Enhancing the Seebeck effect in Ge/Si through the combination of interfacial design features10.1038/s41598-019-52654-z ↗
29. Ammonium-driven modulation of 1T-MoS2 structure and composite with graphene: a pathway to high-performance lithium-ion battery anodes10.1016/j.jcis.2024.10.194 ↗
30. Advances in carbon nanotubes and carbon coatings as conductive networks in silicon-based anodes10.1002/adfm.202408285 ↗
31. A polymetallic metal-organic framework-derived strategy toward synergistically multidoped metal oxide electrodes with ultralong cycle life and high volumetric capacity10.1002/adfm.201605332 ↗
32. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
33. Kieron, Rationale for mixing exact exchange with density functional approximations10.1063/1.472933 ↗
34. Role of d-phase on mechanical behaviors of additive manufactured Inconel 718: detailed microstructure analysis and crystal plasticity modelling10.1016/j.ijplas.2023.103708 ↗
35. Commentary: the materials project: a materials genome approach to accelerating materials innovation10.1063/1.4812323 ↗
36. New developments in the inorganic crystal structure database (ICSD): accessibility in support of materials research and design10.1107/S0108768102006948 ↗
37. Constant temperature molecular dynamics method10.1143/PTPS.103.1 ↗
38. Origin of fast ion diffusion in super-ionic conductors10.1038/ncomms15893 ↗
39. Unraveling the lithium/sodium-ion diffusion mechanism in alloyed phosphides for lithium/sodium storage10.1021/acs.jpcc.4c01211 ↗
40. Yifei, Statistical variances of diffusional properties from ab initio molecular dynamics simulations10.1038/s41524-018-0074-y ↗
41. High-entropy engineering for multivalency-induced stability in SnSb-based anodes