journal article·2025-04

Hybrid effect of Sm and B4C on grain size stability and hardness of nanocrystalline CoCrFeNi high entropy alloy after isothermal annealing

Esma Taşdemir, Recep C. Koç, Ahmet B. Batıbay, Hasan Kotan

Publisher page

Abstract

In this study, a hybrid effect of Sm and B4C additions is explored to enhance the thermal stability of mechanically alloyed nanocrystalline CoCrFeNi HEA after exposures to long-term annealing at 700 degrees C and 900 degrees C. The structural and microstructural investigations were carried out using X-ray diffraction (XRD), focused ion beam microscopy (FIB), and scanning transmission electron microscopy (STEM) with energy dispersive spectroscopy (EDS). The results revealed that 7 nm grain size of as-milled CoCrFeNi HEA coarsened to 247.38 f 69 nm after 1 h of annealing at 900 degrees C. However, the hybrid addition of Sm and B4C significantly retarded grain growth, reducing the average grain size to 98.74 f 47 nm after 24 h of annealing at the same temperature. The resistance to grain growth is attributed to Sm and B4C additions and the formation of Sm-based oxide phases during annealing. The influence of microstructures on hardness was utilized to examine the mechanical changes as a function of annealing temperature and annealing time. Accordingly, the hardness of CoCrFeNi, measured as 517.8 f 25 HV after mechanical alloying, decreased significantly to 321 f 10 HV and 277 f 13 HV after 1 and 24 h of annealing at 900 degrees C, respectively. In contrast, the hybrid HEA maintained a hardness of 439.5 f 10 HV even after 24 h of annealing at 900 degrees C. Compared to the individual additions of Sm and B4C, the hybrid addition also proved more effective in preserving hardness at elevated temperatures over time. Overall, exploring the hybrid effect of alloying and second-phase addition provides a promising strategy for improving the grain size stability and the mechanical properties of nanocrystalline CoCrFeNi HEAs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Nanostructured high entropy alloys as structural and functional materials10.1021/acsnano.4c03435 ↗
2. Nanocrystalline high-entropy alloys10.1557/jmr.2017.341 ↗
3. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
4. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
5. High-entropy alloys for advanced nuclear applications10.3390/e23010098 ↗
6. Controlling radiation damage10.1126/science.1188088 ↗
7. Grain growth in high-entropy alloys (HEAs): a review10.1007/s44210-022-00002-8 ↗
8. An investigation of abnormal grain growth in Zr doped CoCrFeNi HEAs through in-situ formed oxide phases10.1016/j.intermet.2022.107588 ↗
9. Influence of Y (yttrium) doping on thermal stability of nanocrystalline AlCoCrCuFeNi high entropy alloy10.1016/j.intermet.2025.108638 ↗
10. Remarkable thermal stability of nanocrystalline CoCrFeNi high entropy alloy achieved through the incorporation of rare-earth element samarium10.1016/j.intermet.2024.108608 ↗
11. Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation10.1016/j.actamat.2015.06.025 ↗
12. Design of self-stable nanocrystalline high-entropy alloy10.1016/j.matdes.2023.112482 ↗
13. Role of yttrium addition and annealing temperature on thermal stability and hardness of nanocrystalline CoCrFeNi high entropy alloy10.1016/j.intermet.2022.107589 ↗
14. Grain size stabilization of oxide dispersion strengthened CoCrFeNi-Y₂O₃ high entropy alloys synthesized by mechanical alloying10.1016/j.jallcom.2021.161363 ↗
15. Humphreys · 2012
16. Synergistic effect of Nb and Mo alloying on the microstructure and mechanical properties of CoCrFeNi high entropy alloy10.1016/j.msea.2021.142153 ↗
17. Designing CoCrFeNi-M (M = Nb, Ta, Zr, and Hf) eutectic high-entropy alloys via a modified simple mixture method10.1016/j.jallcom.2023.168975 ↗
18. Synergistic effect of Nb and W alloying on the microstructure and mechanical properties of CoCrFeNi high entropy alloys10.1016/j.jmrt.2024.01.003 ↗
19. Trimodal hierarchical structure in the carbonaceous hybrid (GNPs+CNTs) reinforced CoCrFeMnNi high entropy alloy to promote strength-ductility synergy10.1016/j.msea.2022.143446 ↗
20. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
21. Aluminum and titanium alloyed non-equiatomic Co–Fe–Ni medium-entropy alloy with ultra-high strength and hardness10.1016/j.msea.2021.141297 ↗
22. The synergistic addition of Al, Ti, Mo and W to strengthen the equimolar CoCrFeNi high-entropy alloy via thermal-mechanical processing10.1016/j.jallcom.2022.163774 ↗
23. Additive manufactured new hybrid high entropy alloys derived from the AlCoFeNiSmTiVZr system10.1016/j.apsusc.2018.12.300 ↗
24. Effect of molybdenum and niobium on the phase formation and hardness of nanocrystalline CoCrFeNi high entropy alloys10.1166/jnn.2014.9441 ↗
25. Microstructure, mechanical, and tribological properties of CoCrFeNi-Ag-Mo self-lubricating composite10.1007/s11665-023-08085-z ↗
26. Effects of Nb and Zr alloying on the microstructure, mechanical properties, and corrosion resistance of CoCrFeNi high-entropy alloys
27. Effect of Ti and C additions on the microstructure and mechanical properties of the FeCoCrNiMn high-entropy alloy10.1016/j.msea.2018.02.040 ↗
28. Influence of Zr and nano-Y₂O₃ additions on thermal stability and improved hardness in mechanically alloyed Fe base ferritic alloys10.1016/j.jallcom.2014.07.054 ↗
29. Boron carbide/magnesium composites: processing, microstructure and properties10.1016/j.jeurceramsoc.2012.04.007 ↗
30. Synthesis and structural characterization of Al–B₄C nano-composite powders by mechanical alloying10.1016/j.jallcom.2008.12.076 ↗
31. Wear behavior of CoCrFeNi high-entropy alloy prepared by mechanical alloying10.1016/j.jallcom.2024.177115 ↗
32. Effect of Cr content on microstructure, mechanical, and corrosion properties of CoCrxFeMnNi high-entropy alloys fabricated by selective laser melting10.1016/j.matchar.2024.113949 ↗
33. Phase evolution and stability of nanocrystalline CoCrFeNi and CoCrFeMnNi high entropy alloys10.1016/j.jallcom.2018.08.200 ↗
34. In situ study of non-equilibrium solidification of CoCrFeNi high-entropy alloy and CrFeNi and CoCrNi ternary suballoys10.1016/j.actamat.2021.116880 ↗
35. Grain growth kinetics in CoCrFeNi and CoCrFeMnNi high entropy alloys processed by spark plasma sintering10.1016/j.jallcom.2019.03.341 ↗
36. Effect of in-situ formed oxide and carbide phases on microstructure and corrosion behavior of Zr/Y doped CoCrFeNi high entropy alloys prepared by mechanical alloying and spark plasma sintering10.1016/j.intermet.2023.107998 ↗
37. In-situ formed oxide enables extraordinary high-cycle fatigue resistance in additively manufactured CoCrFeMnNi high-entropy alloy
38. Additive manufacturing of an aluminum matrix composite reinforced with nanocrystalline high-entropy alloy particles10.1016/j.msea.2016.10.038 ↗
39. Phase evolution and densification behavior of nanocrystalline multicomponent high entropy alloys during spark plasma sintering10.1007/s11837-013-0759-0 ↗
40. Evolution of phase constitution with mechanical alloying and spark plasma sintering of nanocrystalline AlxCoCrFeNi (x = 0, 0.3, 0.6, 1 mol) high-entropy alloys10.1557/s43578-021-00483-0 ↗
41. Significant lattice-distortion effect on compressive deformation in Mo-added CoCrFeNi-based high-entropy alloys10.1016/j.msea.2021.142295 ↗
42. Development of nano-structure Cu–Zr alloys by the mechanical alloying process10.1016/j.jallcom.2010.08.071 ↗
43. Effect of the atomic size distribution on glass forming ability of amorphous metallic alloys10.1016/S0025-5408(01)00715-2 ↗
44. An assessment of the lattice strain in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.09.032 ↗
45. Nanostructured materials10.1002/adma.19920040704 ↗
46. Dislocations and grain size in ball-milled iron powder10.1016/S0965-9773(96)00048-7 ↗
47. Grain-boundary relaxation and its effect on plasticity in nanocrystalline Fe10.1063/1.2187417 ↗
48. Grain boundary relaxation strengthening of nanocrystalline Ni–W alloys10.1557/jmr.2012.55 ↗
49. Grain contrast imaging in FIB and SEM10.1088/1742-6596/126/1/012054 ↗
50. Microstructure and properties of typical equiatomic CrMnFeCoNi high entropy alloy doped with different rare earth elements10.1016/j.intermet.2024.108477 ↗
51. Local inhomogeneous state in multiferroic SmCrO310.1038/s41598-020-61384-6 ↗
52. Microstructural evolution and mechanical characterization of a WC-reinforced CoCrFeNi HEA matrix composite10.1038/s41598-022-13649-5 ↗
53. Structural nanocrystalline materials: an overview10.1007/s10853-006-0609-3 ↗
54. The structure and properties of nanocrystalline materials: issues and concerns10.1007/BF02709088 ↗
55. A thermokinetic description for grain growth in nanocrystalline materials10.1016/j.actamat.2008.11.025 ↗
56. Design of stable nanocrystalline alloys10.1126/science.1224737 ↗
57. Stabilizing nanocrystalline materials with dopants10.1016/j.actamat.2006.11.028 ↗
58. Reducing grain boundary, dislocation line and vacancy formation energies by solute segregation. I. Theoretical background10.1016/j.actamat.2007.05.047 ↗
59. Alloy thermodynamics in nanostructures10.1557/JMR.1994.0004 ↗
60. Drag effects on grain growth dynamics10.1016/j.commatsci.2012.10.012 ↗
61. High temperature stabilization of nanocrystalline grain size: thermodynamic versus kinetic strategies10.1557/jmr.2012.429 ↗
62. A unified theory of recovery, recrystallization and grain growth, based on the stability and growth of cellular microstructures—II. The effect of second-phase particles10.1016/S1359-6454(97)00173-0 ↗
63. On the theory of the effect of precipitate particles on grain growth in metals
64. Exceptional resistance to grain growth in nanocrystalline CoCrFeNi high entropy alloy at high homologous temperatures10.1016/j.jallcom.2015.12.020 ↗
65. Production of CoCrFeNi(Al/Ti) high-entropy alloys by mechanical alloying: optimization of milling time and comparison of corrosion susceptibilities10.1007/s11665-023-08380-9 ↗
66. Effect of Ge addition on the microstructure, mechanical properties, and corrosion behavior of CoCrFeNi high-entropy alloys10.1016/j.intermet.2021.107167 ↗
67. Microstructure and mechanical properties of non-equilibrium solidified CoCrFeNi high entropy alloy10.1016/j.matchemphys.2017.06.037 ↗
68. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
69. Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: a model for predicting their yield strength10.1016/j.scriptamat.2005.12.017 ↗
70. Effect of sintering temperature and aluminium addition on thermal stability, micrographic features, and mechanical properties of Fe-Ni based ODS alloys10.1016/j.jallcom.2023.170336 ↗