journal article·2025-04Open access

Influence of process parameters on the quality of laser powder bed fusion of Alnico

Yongyong Gan, Ketai He, Biqiang Yu, Hao Dong, Zhipeng Zhou, Chaofang Dong

Abstract

Anisotropic Alnico permanent magnets were fabricated using Laser Powder Bed Fusion (LPBF) technology, achieving a maximum density of up to 94.5 %. The fabricated magnets underwent a homogenization process at 1250 °C, followed by quenching in ice water, and were then subjected to a full heat treatment. A full-factorial design of experiments (DOE) approach was employed to systematically vary the process parameters, combined with temperature field simulations, to investigate the effects of these parameters on the forming quality of LPBF-fabricated Alnico magnets and identify the key factors contributing to defect formation. The results indicate that the concentrated distribution of Al elements is associated with the formation of irregular pores and subsequent cracks. The remelting process facilitates the conditions for Al elements to induce these defects. Factors such as powder layer thickness, scan spacing, and scanning strategy all influence the extent of remelting, with excessive remelting ultimately leading to pore and crack formation. These parameters collectively affect the molten pool size, temperature gradient, and cooling rate. The molten pool size determines the remelting area, which, to a certain extent, impacts the overall print quality. Furthermore, lower peak values of the temperature gradient and cooling rate in the molten pool region, along with a more gradual variation in these parameters, lead to better print quality with fewer defects. Experimental validation confirmed that, for the materials used in this study, optimal print quality was achieved when the laser power was set to 190 W, scanning speed to 1200 mm/s, powder layer thickness to 0.04 mm, and scan spacing to 0.08 mm. ● Using a full-factorial DOE method to modify SLM process parameters. ● Temperature Field Simulation of SLM Forming Alnico Process. ● SLM formed Alnico permanent magnet with a maximum density of 94.5 %. ● The concentrated distribution of aluminum element is related to pores and cracks.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Perspective and prospects for rare earth permanent magnets10.1016/j.eng.2018.11.034 ↗
2. Current progress and future challenges in rare-earth-free permanent magnets10.1016/j.actamat.2018.07.049 ↗
3. Synthesis, microstructures, magnetic properties and thermal stabilities of isotropic Alnico ribbons10.1016/j.jmmm.2018.07.020 ↗
4. Microstructure and magnetic properties of Dy-added Alnico alloys10.1016/j.jallcom.2023.172894 ↗
5. Effect of grain structure on the magnetic properties of AlNiCo 8 alloys
6. Shape anisotropy and magnetic texture determination in anisotropic and isotropic Alnico magnets10.1007/s11837-024-06586-3 ↗
7. Evolution of microstructure and magnetic properties of isotropic Alnico 8 ribbons with various Ti contents10.1007/s10948-024-06718-5 ↗
8. Manufacturing processes for permanent magnets: part i-sintering and casting10.1007/s11837-022-05156-9 ↗
9. Nanocomposite Didymium-Fe-B/Alnico magnetic alloys with core shell structure and improved magnetic properties10.1016/j.jmmm.2023.171129 ↗
10. Architecture and magnetism of Alnico
11. The study on abnormal temperature characteristics of coercivity in Alnico 8 alloys10.1016/j.jmmm.2020.166865 ↗
12. TriBeam tomography and microstructure evolution in additively manufactured Alnico magnets10.1016/j.mattod.2021.05.003 ↗
13. Microstructures and magnetic properties of cast Alnico 8 permanent magnets under various heat treatment conditions10.1016/j.physb.2018.10.007 ↗
14. Interaction mechanism, magnetic properties and microstructure of Ce-Fe-B/Alnico spark plasma sintered magnets10.1016/j.jmmm.2021.168237 ↗
15. Microstructure and magnetic properties of melt-spun Alnico-5 alloys10.1016/j.jmmm.2015.12.092 ↗
16. An exploration of nanocomposite Nd-Fe-B/Alnico alloys with enhanced intergrain interactions and improved magnetic properties10.1016/j.jallcom.2020.158238 ↗
17. Processing of Alnico permanent magnets by advanced directional solidification methods10.1016/j.jmmm.2016.06.091 ↗
18. The magnetic and structural properties of AlNiCo-8 alloy particles synthesized by CaH2 reduction10.1016/j.cplett.2018.08.078 ↗
19. Improved microstructure and magnetic properties of alnico 8 alloys by B-doping10.1109/TMAG.2018.2822620 ↗
20. The metallurgy and processing science of metal additive manufacturing10.1080/09506608.2015.1116649 ↗
21. Net shape processing of alnico magnets by additive manufacturing10.1109/TMAG.2017.2711965 ↗
22. Additive manufacturing of magnetic materials10.1016/j.pmatsci.2020.100688 ↗
23. Manufacturing processes for permanent magnets: part ii-bonding and emerging methods10.1007/s11837-022-05188-1 ↗
24. Processing of Alnico magnets by additive manufacturing
25. Comparison of sequential and circular scanning thermal fields and their influence on microstructure of Alnico alloy produced by laser powder bed fusion
26. F.H. Li, D.C. Kong, X.Y. Zhu, X.W. Meng, K.T. He, Mechanical properties and optimization of AlNiCo magnetic materials fabricated by selective laser melting, 17th Conference on Industrial Electronics and Applications (ICIEA), Chengdu, PEOPLES R CHINA, 2022, pp. 1283-1288. http://dx.doi.org/10.1109/iciea54703.2022.10006305.10.1109/ICIEA54703.2022.10006305 ↗
27. The effect of selective laser melting conditions on the structure of an alnico alloy10.1134/S0031918X22030103 ↗
28. High-performance Alnico magnets prepared by powder bed fusion10.1016/j.jallcom.2023.173380 ↗
29. On the structural integrity of Fe-36Ni Invar alloy processed by selective laser melting
30. The effects of SLM process parameters on the relative density and hardness of austenitic stainless steel 316L10.1016/j.jmrt.2024.01.237 ↗
31. Investigations of thermo-magnetic treatment of alnico 8 alloy
32. Compression molding and novel sintering treatments for Alnico type-8 permanent magnets in near-final shape with preferred orientation10.1007/s11837-017-2453-0 ↗