journal article·2025-01Open access

Balanced mechanical properties of Al0.5CoCrFeNiTi0.1 high entropy alloy under extreme environments from cryogenic temperature to 800 °C

Kanghyun Park, Hamza Iftikhar, Seunghwan Shin, Yunjong Jung, Kangjin Lee, Chanho Lee, Gian Song

Abstract

The advancement of modern industry requires the development of high-performance materials capable of operating in extreme environments, such as at cryogenic and high temperatures. Face-centered cubic (FCC) high entropy alloys (HEAs) show remarkable mechanical properties at low temperatures caused by nano-twinning. However, their strength is insufficient at both room and elevated temperatures. To address this issue, we attempted to develop Al 0.5 CoCrFeNiTi 0.1 HEA, which consists of FCC matrix and L2 1 precipitates, with excellent mechanical properties at various temperatures. The evolutions of microstructures and mechanical properties were examined by experimental efforts coupled with theoretical approaches, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), tensile tests at room temperature and theoretical strengthening calculations. Additional tensile tests were conducted at cryogenic (-160 °C) and high temperatures (600–800 °C). The ultimate tensile strength (UTS) at room temperature was measured as 1097.5 MPa, while values at −160, 600, 700 and 800 °C were identified to be 1398.0, 707.2, 548.2 and 332.7 MPa, respectively. These results revealed outstanding mechanical properties compared to other FCC-based alloys.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. A review on high-temperature applicability: a milestone for high entropy alloys
2. High-entropy alloys: a review of mechanical properties and deformation mechanisms at cryogenic temperatures10.1007/s10853-022-07066-2 ↗
3. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
4. High-entropy alloys10.1038/s41578-019-0121-4 ↗
5. Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating10.1002/adem.200300507 ↗
6. Relationship between the unique microstructures and behaviors of high-entropy alloys10.1007/s12613-023-2777-4 ↗
7. Mechanical behavior and shear band of a powder-metallurgy-fabricated CoCrFeMnNi high-entropy alloy during high strain-rate deformation10.1016/j.jmrt.2022.09.106 ↗
8. Mechanical, materials, and physicochemical effects on the high-temperature tribological behaviour of laser additive manufacturing AlCoCrFeNi2. 1 eutectic high-entropy alloys10.1080/17452759.2024.2355640 ↗
9. Stacking ensemble learning assisted design of Al-Nb-Ti-V-Zr lightweight high-entropy alloys with high hardness10.1016/j.matdes.2024.113363 ↗
10. Microstructure and compressive properties of NbTiVTaAlx high entropy alloys10.1016/j.proeng.2012.03.043 ↗
11. Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys10.1016/j.intermet.2013.10.024 ↗
12. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
13. Tensile properties of high-and medium-entropy alloys10.1016/j.intermet.2013.03.018 ↗
14. Mechanical properties and stacking fault energies of NiFeCrCoMn high-entropy alloy10.1007/s11837-013-0771-4 ↗
15. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
16. Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co25Ni25Fe25Al7. 5Cu17. 5 high-entropy alloy10.1016/j.actamat.2016.01.050 ↗
17. Design of D022 superlattice with superior strengthening effect in high entropy alloys10.1016/j.actamat.2019.01.048 ↗
18. Enhancing fatigue life by ductile-transformable multicomponent B2 precipitates in a high-entropy alloy10.1038/s41467-021-23689-6 ↗
19. Deformation mechanisms of Al0. 1CoCrFeNi at elevated temperatures10.1016/j.msea.2016.12.110 ↗
20. Ferritic Alloys with Extreme Creep Resistance via Coherent Hierarchical Precipitates10.1038/srep16327 ↗
21. Increasing the creep resistance of Fe-Ni-Al-Cr superalloys via Ti additions by optimizing the B2/L21 ratio in composite nano-precipitates10.1016/j.actamat.2018.07.025 ↗
22. Developing high-strength ferritic alloys reinforced by combination of hierarchical and laves precipitates10.1016/j.jallcom.2020.158162 ↗
23. Optimization of B2/L21 hierarchical precipitate structure to improve creep resistance of a ferritic Fe-Ni-Al-Cr-Ti superalloy via thermal treatments10.1016/j.scriptamat.2018.10.004 ↗
24. Outstanding high-temperature strength of novel Fe–Cr–Ni–Al–V ferritic alloys with hierarchical B2–NiAl precipitates10.1016/j.msea.2022.142999 ↗
25. Designing L21-Co2TiAl precipitate-strengthened ferritic alloys with excellent high-temperature mechanical properties10.1016/j.msea.2023.145984 ↗
26. Influence of Single Aging Treatment on the Mechanical Properties of Additively Manufactured Ultra-Thin 18Ni-300 Maraging Steel
27. VDRIVE-Data reduction and interactive visualization software for event mode neutron diffraction
28. Combinatorial exploration of B2/L21 precipitation strengthened AlCrFeNiTi compositionally complex alloys10.1016/j.jallcom.2020.156111 ↗
29. Influence of aging temperature on strength and toughness of laser-welded T-250 maraging steel joint10.1016/j.msea.2016.05.043 ↗
30. Unraveling the two-stage precipitation mechanism in a hierarchical-structured fcc/L21 high-entropy alloy: Experiments and analytical modeling10.1016/j.actamat.2023.119426 ↗
31. Phases, microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloys at elevated temperatures10.1016/j.jallcom.2013.11.084 ↗
32. Effects of Ni and Al on precipitation behavior and mechanical properties of precipitation-hardened CoCrFeNi high-entropy alloys10.1016/j.msea.2022.142879 ↗
33. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
34. L21-strengthened face-centered cubic high-entropy alloy with high strength and ductility10.1016/j.msea.2020.140056 ↗
35. T. Gladman, Physical metallurgy of microalloyed steels, (No Title), (1997).
36. Shear band-driven precipitate dispersion for ultrastrong ductile medium-entropy alloys10.1038/s41467-021-25031-6 ↗
37. Precipitation behavior and its effects on tensile properties of FeCoNiCr high-entropy alloys10.1016/j.intermet.2016.09.005 ↗
38. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗
39. The effect of solid solution W additions on the mechanical properties of nanocrystalline Ni10.1016/S1359-6454(02)00427-5 ↗
40. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
41. Cryogenic mechanical behavior of a TRIP-assisted dual-phase high-entropy alloy
42. The B2 phase-driven microstructural heterogeneities and twinning enable ultrahigh cryogenic strength and large ductility in NiCoCr-based medium-entropy alloy10.1016/j.actamat.2022.117981 ↗
43. The role of annealing twins during recrystallization of Cu10.1016/j.actamat.2007.03.021 ↗
44. First In Situ Lattice Strains Measurements Under Load at VULCAN10.1007/s11661-010-0495-9 ↗
45. Deformation mechanisms in a precipitation-strengthened ferritic superalloy revealed by in situ neutron diffraction studies at elevated temperatures10.1016/j.actamat.2014.09.053 ↗
46. High temperature tensile properties and deformation behavior of CoCrFeNiW0. 2 high entropy alloy10.1016/j.ijrmhm.2024.106776 ↗
47. The ultrahigh charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures10.1016/j.intermet.2015.11.002 ↗