The effect of hatch distance on the microstructure and mechanical properties of Ti15Mo prepared by selective laser melting
Source abstract
Abstract
The present study investigated the effect of hatch distance on the microstructural evolution and mechanical properties of selective laser melting Ti15Mo. It was found that an increase in hatch distance resulted in a decrease in grain size and an increase in the density of tangled dislocations, attributed to enhanced cooling rate during SLM process. In addition, in-situ heat treatment facilitated the development of the isothermal ω phase, which restrained the formation of {332}< 113 > mechanical twins during plastic deformation. Differences in mechanical properties were discernible in as-built Ti15Mo specimens produced with varying hatch distances. Notably, the yield strength of as-built Ti15Mo ranged from 660 MPa to 1050 MPa as the hatch distance decreased.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Titanium-based alloys and composites for orthopedic implants applications: a comprehensive review10.1016/j.matdes.2024.112850 ↗
2. A novel titanium alloy for load-bearing biomedical implants: evaluating the antibacterial and biocompatibility of Ti536 produced via electron beam powder bed fusion additive manufacturing process10.1016/j.bioadv.2024.213928 ↗
3. Influence of heat treatment on the microstructure, wettability, and corrosion resistance of a Ti–30Nb–7Zr alloy used in biomedical applications10.1016/j.jmrt.2024.01.250 ↗
4. Chemical, structural, microstructural, mechanical, and biological characterization of Ti–25Ta-xNb system alloys for biomedical applications10.1016/j.jmrt.2023.12.148 ↗
5. Electrochemical characterization of β-Ti alloy in ringer's solution for implant application10.1016/j.jallcom.2009.01.036 ↗
6. High-strength nanostructured Ti–12Mo alloy from ductile metastable beta state precursor10.1016/j.msea.2010.03.044 ↗
7. Microstructural characterization of transformation products of bcc β in Ti-15 Mo alloy10.1016/j.jallcom.2015.10.200 ↗
8. Role of {332}< 113> twinning on adiabatic shear behavior during dynamic loading in β-type Ti–15Mo alloy
9. Static and dynamic Hall–Petch relations in {332}<113> TWIP Ti–15Mo alloy
10. An investigation into the flexural characteristics of functionally graded cobalt chrome femoral stems manufactured using selective laser melting10.1016/j.matdes.2014.03.068 ↗
11. Selective laser melting process optimization of Ti–Mo–TiC metal matrix composites10.1016/j.cirp.2019.04.120 ↗
12. Selective laser melting of low modulus Ti-Mo alloy: α/β heterogeneous conchoidal structure10.1016/j.matlet.2020.127544 ↗
13. Phase selection-oriented mechanical properties tailoring for β-type TiNbZrTaSi alloy fabricated by laser powder bed fusion
14. Programming crystallographic orientation in additive-manufactured beta-type titanium alloy
15. Overcoming the strength–ductility trade-off by tailoring grain-boundary metastable Si-containing phase in β-type titanium alloy10.1016/j.jmst.2020.06.053 ↗
16. In situ heat treatment in selective laser melted martensitic AISI 420 stainless steels10.1016/j.matdes.2015.08.045 ↗
17. Effects of the thermal history on the microstructural and the mechanical properties of stainless steel 316L parts produced by wire-based laser metal deposition10.1016/j.msea.2023.145862 ↗
18. Effects of thermal cycles on the microstructure evolution of Inconel 718 during selective laser melting process
19. Controlling martensitic decomposition during selective laser melting to achieve best ductility in high strength Ti-6Al-4V10.1016/j.msea.2018.12.047 ↗
20. Achieving high ductility in a selectively laser melted commercial pure-titanium via in-situ grain refinement10.1016/j.scriptamat.2020.09.023 ↗
21. A novel crack-free Ti-modified Mo alloy designed for laser powder bed fusion10.1016/j.jallcom.2022.164802 ↗
22. In-situ formation of Ti-Mo biomaterials by selective laser melting of Ti/Mo and Ti/Mo2C powder mixtures: a comparative study on microstructure, mechanical and wear performance, and thermal mechanisms10.1016/j.jmst.2021.09.017 ↗
23. Selective laser melting of commercially pure molybdenum by laser rescanning10.1089/3dp.2021.0265 ↗
24. Microstructure tailoring of Ti–15Mo alloy fabricated by selective laser melting with high strength and ductility10.1016/j.msea.2021.141962 ↗
25. Study of substrate preheating on the microstructure and mechanical performance of Ti-15Mo alloy processed by selective laser melting10.1016/j.jallcom.2022.167130 ↗
26. Study of superior strength in Ti15Mo alloy manufactured using selective laser melting10.1016/j.jallcom.2021.161186 ↗
27. Effect of laser speed and hatch spacing on the corrosion behavior of 316l stainless steel produced by selective laser melting10.3390/ma15041353 ↗
28. Determinants of the surface quality, density and dimensional correctness in selective laser melting of the Ti-13Zr-13Nb alloy
29. Influence of hatch distance on processing, microstructure and mechanical properties of AlMgScZr alloy fabricated by laser powder bed fusion10.1016/j.jmapro.2022.06.036 ↗
30. Effect of process parameters and build orientations on the mechanical properties of maraging steel (18Ni-300) parts printed by selective laser melting10.1016/j.matpr.2022.09.362 ↗
31. Is the energy density a reliable parameter for materials synthesis by selective laser melting?10.1080/21663831.2017.1299808 ↗
32. Effects of direct aging on near-alpha Ti–6Al–2Sn–4Zr–2Mo (Ti-6242) titanium alloy fabricated by selective laser melting (SLM)10.1016/j.msea.2020.139533 ↗
33. Porosity formation mechanisms, microstructure evolution and mechanical performance of AlMgScZr alloy fabricated by laser powder bed fusion: effect of hatch distance10.1016/j.jmapro.2023.03.047 ↗
34. Selective laser melting of pure molybdenum: evolution of defect and crystallographic texture with process parameters10.1016/j.matdes.2020.108588 ↗
35. Effect of substrate preheating on the texture, phase and nanohardness of a Ti–45Al–2Cr–5Nb alloy processed by selective laser melting10.1016/j.scriptamat.2016.02.022 ↗
36. The cellular boundary with high density of dislocations governed the strengthening mechanism in selective laser melted 316L stainless steel10.1016/j.msea.2020.140279 ↗
37. Effect of scan line spacing on texture, phase and nanohardness of TiAl/TiB2 metal matrix composites fabricated by selective laser melting10.1016/j.jallcom.2017.09.053 ↗
38. Selective laser melting of Ti–22Al–25Nb intermetallic: significant effects of hatch distance on microstructural features and mechanical properties10.1016/j.jmatprotec.2019.116398 ↗
39. Dislocation networks in gamma/gamma’-microstructures formed during selective laser melting of a Ni-base superalloy10.1016/j.scriptamat.2020.08.019 ↗
40. Spatial control of functional response in 4D-printed active metallic structures
41. Formation of metastable cellular microstructures in selective laser melted alloys10.1016/j.jallcom.2016.12.209 ↗
42. Delineating dislocation structures and residual stresses in additively manufactured alloys10.1016/j.actamat.2023.119413 ↗
43. Heterogeneous distribution of isothermal ω precipitates prevents brittle fracture in aged β-Ti alloys10.1016/j.scriptamat.2023.115879 ↗
44. In-situ tailoring mechanical properties of metastable Ti15Mo alloy produced by selective laser melting10.1016/j.msea.2022.144546 ↗
45. A review of metastable beta titanium alloys10.3390/met8070506 ↗
46. {332}<113> mechanical detwinning as a deformation mechanism in the β-metastable Ti-15Mo alloy during cyclic loading
47. Simultaneously enhanced strength and ductility in a metastable β-Ti alloy by stress-induced hierarchical twin structure10.1016/j.scriptamat.2020.03.039 ↗
48. ω precipitation: deformation regulator in metastable titanium alloys10.1016/j.msea.2019.138687 ↗
49. Change in the deformation mode resulting from beta-omega compositional partitioning in a Ti Mo alloy: room versus elevated temperature10.1016/j.scriptamat.2016.11.013 ↗
50. Nanodomain structure and its effect on abnormal thermal expansion behavior of a Ti–23Nb–2Zr–0.7Ta–1.2O alloy10.1016/j.actamat.2013.04.060 ↗
51. ω phase acts as a switch between dislocation channeling and joint twinning- and transformation-induced plasticity in a metastable β titanium alloy10.1016/j.actamat.2018.03.053 ↗
52. ω phase strengthened 1.2GPa metastable β titanium alloy with high ductility10.1016/j.scriptamat.2018.10.043 ↗
53. Origin of the ductile-to-brittle transition of metastable β-titanium alloys: self-hardening of ω-precipitates10.1016/j.actamat.2019.03.034 ↗
54. Strengthening strategy for a ductile metastable β-titanium alloy using low-temperature aging10.1080/21663831.2017.1350211 ↗
55. Role of omega phase evolution in plastic deformation of twinning-induced plasticity β Ti–12V–2Fe–1Al alloy10.1016/j.matdes.2019.108282 ↗
56. Effect of twinned-structure on deformation behavior and correlated mechanical properties in a metastable β-Ti alloy10.1016/j.jallcom.2019.152054 ↗