Investigation of wetting behavior and brazing reliability of Zn-15Al-xGa filler metals in Cu/Al Joints
Source abstract
Abstract
Ga elements with different contents (0.1–1.5 wt%) were melted into the Zn-15Al filler metal to change the microstructure and thus improve the properties of the Cu/Al joints. The results showed that the addition of Ga element reduced the solidus and liquidus temperatures as well as the surface tension of the Zn-15Al filler alloy. Low concentrations of Ga (≤0.5 wt%) can effectively increase the wettability of the filler metal. With increasing Ga addition amount, the size and proportion of the CuAl 2 phase within the Cu/Zn-Al/Al brazed joint microstructure were increased, and also guided the transformation of the interfacial constituent phases on the Cu side interface from Al 4.2Cu 3.2Zn 0.7/Al 3Cu 5Zn 2 to Al 4.2Cu 3.2Zn 0.7/CuAl 2/Al 3Cu 5Zn 2, which effectively adjusted the crack propagation path and increased the shear strength during the fracture process of the shear strength test on the brazed joint. The shear strength test results indicated the Cu/Zn-Al-0.5Ga/Al joint have the highest shear strength (85.8 MPa, 15 % improvement over the Cu/Zn-Al/Al joint). Consequently, appropriate Ga addition (0.5 wt%) enhanced both the meltability and wettability of Zn-15Al filler metal, which was suitable for obtaining high-quality Cu/Al brazed joints.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Investigating the influence of Ni interlayers on Fe/Al laser welded joints: a first-principles study10.1016/j.jmrt.2024.05.032 ↗
2. Microstructure and mechanical properties of single-crystal diamond/Kovar alloy joints brazed with an AgCuTi metal filler10.1016/j.diamond.2023.110246 ↗
3. Characterization of dissimilar aluminum-copper material joining by controlled dual laser beam10.1007/s00170-021-08324-4 ↗
4. Multi-material joining of an aluminum alloy to copper, steel, and titanium by hybrid metal extrusion & bonding10.1007/s11661-023-07047-3 ↗
5. In-depth characterization of laser-welded aluminum-and-copper dissimilar joint for electric vehicle battery connections10.3390/ma15217463 ↗
6. Influence of Si addition on microstructure, mechanical properties, and corrosion resistance of Al/steel brazing joint Using Zn-15Al-XSi filler metals10.1007/s11665-023-08106-x ↗
7. Effects of copper content on the microstructure and brazing properties of Al-Si-Cu-Zn-Re filler metals[J]10.1007/s40194-015-0279-3 ↗
8. Influences of Sn on properties of Ag-based and Cu-based brazing filler metals10.3390/cryst11111403 ↗
9. Microstructural evaluation of a Zn-Al-Ag Alloy[J]10.1557/adv.2018.662 ↗
10. Effects of Ti on the brazability of Zn-22Al-xTi filler metals as well as properties of Cu/Al brazing joints10.1016/S1875-5372(14)60037-0 ↗
11. Enhancing aluminum alloy brazing joint strength by using Zn-Al-Cu filler metal10.1007/s11665-021-06370-3 ↗
12. Improving the reliability of Si die attachment with Zn-Sn-based high-temperature Pb-free solder using a TiN diffusion barrier10.1007/s11664-009-0928-7 ↗
13. Effect of the addition of Sb and rare-earth elements La and Nd on the properties of Cu/6061Al with Zn–10Al–5Cu filler metals
14. Reliability studies of Cu/Al joints brazed with Zn–Al–Ce filler metals10.1016/j.matdes.2012.05.028 ↗
15. Toxic effects of rare earth elements on human health: a review10.3390/toxics12050317 ↗
16. Effects of Zn/Ga ratio on microstructure, mechanical, damping and thermal properties of Mg-Zn-Ga alloy solid solutions10.1557/s43578-022-00572-8 ↗
17. Okamoto, Hiroaki, Mark E.Schlesinger, and Erik M.Mueller, eds. Alloy phase diagrams[M]. ASM international, 2016.10.31399/asm.hb.v03.9781627081634 ↗
18. The microstructures and mechanical properties of the Sn-Zn-Ag-Al-Ga solder alloys—The effect of Ga[J]10.1007/s11664-003-0096-0 ↗
19. Effects of In and Ga on spreading performance of Ag10CuZnSn brazing filler metal and mechanical properties of the brazed joints10.3390/cryst13111597 ↗
20. Corrosion behavior of Sn-based lead-free solder alloys: a review
21. Measurement of the surface tension of liquid Ga, Bi, Sn, In and Pb by the constrained drop method10.3139/146.018027 ↗
22. Lattice distortions in high-entropy alloys10.1557/jmr.2018.322 ↗
23. Two types of the effect of gallium on aluminum10.1134/S0036029523080256 ↗
24. Characteristics for gallium-based liquid alloys of low melting temperature10.3390/met13030615 ↗
25. The contribution of constitutional supercooling to nucleation and grain formation10.1007/s11661-015-2960-y ↗
26. Grain coarsening of cast magnesium alloys at high cooling rate: a new observation10.1007/s11661-016-3852-5 ↗
27. Crystal nucleation and growth in undercooled melts of pure Zr, binary Zr-based and ternary Zr-Ni-Cu glass-forming alloys10.1007/s11837-018-2782-7 ↗
28. Wetting behaviour of Cu–Ga alloys on 304L steel10.1016/j.matdes.2015.11.034 ↗
29. Surface tension of molten Cu− Sn alloys under different oxygen containing atmospheres10.1021/je800717a ↗
30. Kinetics of reactive wetting10.1016/S1359-6462(00)00298-0 ↗
31. Modeling surfactant-laden droplet dynamics by lattice Boltzmann method
32. Thin film dynamics using lattice Boltzmann method: Role of aspect ratio and surface wettability gradient10.1063/5.0095685 ↗
33. Formation of intermetallic compounds in Al–Cu Interface via cold roll bonding: review10.3103/S1068375522010112 ↗
34. Ag-based filler metal wetting behavior and brazed joint performance on SLMed Ti/TiB2 substrate10.1108/SSMT-12-2023-0079 ↗