journal article·2025-01

Dependence of fretting wear resistance on the α morphology and stress-induced martensite transformation in a metastable β titanium alloy

Xiaojun Xu, Jianjun Long, Xiage Zhang, Yiting Dong, Binbin Gan, Hao Li, Minhao Zhu

Publisher page

Abstract

Systematic experimental investigations concerning the influence of α morphology on the fretting wear behaviors of metastable β titanium alloys are carried out. A Ti-10V-2Fe-3Al titanium alloy was subjected to different heat treatment routes to create dual phase microstructures consisted of β phase plus α phase with three different morphologies. The effect of α morphology on the fretting wear resistance, the resulting failure mechanisms, and stress induced martensite transformation (SIMT) were unraveled. Results show that the α morphology has a significant influence on fretting wear behaviors depending on the fretting run regimes. In the partial slip regime (PSR) and mixed fretting regime (MFR), the microstructure with lath α morphology has a lowest fretting wear volume accompanied by relatively strong SIMT effect. While in gloss slip regime (GSR), the globular α microstructure has a lowest fretting wear volume along with strongest SIMT response, yet a highest fretting wear volume for the acicular α morphology microstructure due to its brittleness nature. The subsurface observations demonstrates that a compacted and thick plastic deformation layer, especially for the mechanical mixture layer, can well protect the material surface against the fretting wear damage.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Mechanical stress and fatigue analysis · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (75)

Show source-provided references
1. Mechanics and materials in fretting10.1016/0043-1648(92)90266-B ↗
2. Fretting wear behavior of a nuclear fuel rod under a simulated primary coolant condition10.1016/j.wear.2013.01.067 ↗
3. Progress in fretting maps10.1016/j.triboint.2006.02.001 ↗
4. On the mechanisms of various fretting wear modes10.1016/j.triboint.2011.02.010 ↗
5. Effects of surface treatments and coatings on tribological performance of Ti-6Al-4V in the mixed fretting and gross slip regimes10.1016/j.surfcoat.2015.06.055 ↗
6. Dependence of fretting wear resistance on microstructural features of alloyed steels10.1016/j.triboint.2019.04.028 ↗
7. A self-similar model for fretting wear contact with the third body in gross slip10.1016/j.wear.2020.203562 ↗
8. Fretting wear evolution of γ-TiAl alloy10.1016/j.triboint.2020.106721 ↗
9. High-frequency, high-temperature fretting-fatigue experiments10.1016/j.wear.2006.03.048 ↗
10. A multiaxial fretting fatigue test for spline coupling contact10.1111/j.1460-2695.2009.01334.x ↗
11. Fretting fatigue life investigation of AL7075-T6 alloy coated by multilayer thin solid films of TiCr/TiN/CrN and Ti/Cr/TiN/Cr/CrN/TiCrN10.1177/1350650116672145 ↗
12. A review of fretting study on nuclear power equipment10.1016/j.triboint.2019.106095 ↗
13. Effect of temperature on tribo-oxide formation and the fretting wear and friction behavior of zirconium and nickel-based alloys10.1016/j.wear.2021.203722 ↗
14. Prediction of fretting motion in a controllable pitch propeller during service
15. Effect of load on the fretting behavior of SAF 2507 super duplex stainless steel in air and sea water10.1108/ILT-08-2019-0335 ↗
16. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
17. Microstructure design and mechanical properties in a near-α Ti–4Mo alloy10.1016/j.actamat.2015.06.043 ↗
18. Microstructure and tribological characteristics of Ti-6Al-4V alloy against GCr15 under high speed and dry sliding10.1016/j.msea.2006.07.043 ↗
19. Dry sliding wear mechanisms of the Ti6Al4V alloy10.1016/S0043-1648(96)07454-6 ↗
20. A quantitative approach of Ti-6A-4V fretting damage: friction, wear and crack nucleation10.1016/j.wear.2004.05.011 ↗
21. Fretting wear behaviors and mechanism of a high NbTiAl alloy with full lamellar microstructure at ambient temperature10.1007/s10853-022-07605-x ↗
22. Revealing the composite fretting-corrosion mechanisms of Ti6Al4V alloy against zirconia-toughened alumina ceramic in simulated body fluid10.1016/j.jmbbm.2023.106074 ↗
23. High temperature fretting wear of four titanium alloys10.1016/0043-1648(85)90114-0 ↗
24. Effiects of temperature, slip amplitude, contact pressure on fretting fatigue behavior of Ti811 alloys at elevated temperatures10.1016/S1006-7191(08)60080-0 ↗
25. Investigation of fretting fatigue behavior of Ti811 alloy at elevated temperature10.1142/S021797920805070X ↗
26. Investigation on the fretting wear behavior of titanium alloy under different atmospheres by an in situ XPS spectrometry10.1142/S0217979222501090 ↗
27. Tribochemistry of a Ti alloy under fretting in air: evidence of titanium nitride formation10.1007/s11249-009-9426-6 ↗
28. Electrical contact resistance endurance of AgNi10 alloy under fretting wear: Experiment and numerical prediction10.1016/j.wear.2023.205009 ↗
29. A damage mechanics approach to fretting fatigue life prediction with consideration of elastic-plastic damage model and wear10.1016/j.triboint.2014.10.017 ↗
30. A debris layer evolution-based model for predicting both fretting wear and fretting fatigue lifetime10.1016/j.ijfatigue.2020.105928 ↗
31. An investigation of the fretting wear of two aluminium alloys10.1016/0301-679X(95)00118-N ↗
32. The effect of ferrite-martensite morphology on the scratch and abrasive wear behaviour of a dual phase construction steel10.1016/j.wear.2015.12.005 ↗
33. The effect of martensite volume fraction on the scratch and abrasion resistance of a ferrite-martensite dual phase steel10.1016/j.wear.2015.11.017 ↗
34. Accommodation mechanisms in strain-transformable titanium alloys10.1016/j.msea.2021.141437 ↗
35. Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects10.1016/j.actamat.2013.07.019 ↗
36. Processing properties relationships of Ti-10V-2Fe-3Al, Metallurgical and10.1007/BF02647081 ↗
37. G.L. Tjering, Comparison of the fatigue and fracture of α+β and β titanium alloys10.1007/s11661-001-1031-8 ↗
38. Formation and reversion of stress induced martensite in Ti-10V-2Fe-3Al10.1016/0001-6160(82)90137-7 ↗
39. Microstructure tailoring and impact toughness of a newly developed high strength Ti-5Al-3Mo-3V-2Cr-2Zr-1Nb-1Fe alloy10.1016/j.matchar.2021.111103 ↗
40. Tensile brittleness and ductility improvement in a novel metastable β titanium alloy with lamella structure10.1016/j.jallcom.2020.154311 ↗
41. A novel high-strength β-Ti alloy with hierarchical distribution of α-phase: the superior combination of strength and ductility10.1016/j.matdes.2019.107640 ↗
42. Alloy design of metastable α+β titanium alloy with high elastic admissible strain10.1016/j.msea.2020.140621 ↗
43. A novel multi-pass dual-indenter scratch test to unravel abrasion damage formation in construction steels10.1016/j.wear.2014.10.011 ↗
44. Prediction of the abrasion resistance of construction steels on the basis of the subsurface deformation layer in a multi-pass dual-indenter scratch test10.1016/j.wear.2015.05.012 ↗
45. A strengthening strategy for metastable β titanium alloys: Synergy effect of primary α phase and β phase stability10.1016/j.msea.2022.143736 ↗
46. Mechanical properties and deformation mechanisms of Ti-15Nb-5Zr-4Sn-1Fe alloy with varying α phase fraction10.1016/j.jallcom.2021.162816 ↗
47. Influence of α morphology and volume fraction on the stress-induced martensitic transformation in Ti-10V-2Fe-3Al10.1016/j.msea.2011.03.107 ↗
48. In-situ investigation on tensile deformation and fracture behaviors of a new metastable β titanium alloy10.1016/j.msea.2020.140187 ↗
49. A review of in situ observations of deformation-induced β ↔ α″ martensite transformations in metastable β Ti alloys10.1002/adem.202200281 ↗
50. A multi-deformation mechanisms assisted metastable β-ZrTiAlV alloy exhibits high yield strength and high work hardening rate10.1016/j.jallcom.2019.152642 ↗
51. Deformation mechanisms in a β-quenched Ti-5321 alloy: in-situ investigation related to slip activity, orientation evolution and stress induced martensite10.1016/j.jmst.2021.09.051 ↗
52. Stress-induced martensitic transformation in a β-solution treated Ti–10V–2Fe–3Al alloy during compressive deformation10.1016/j.msea.2020.140404 ↗
53. High fatigue endurance limit of a metastable Ti-based metallic glass composite with martensitic transformation10.1016/j.intermet.2021.107253 ↗
54. Role of stress-induced martensite on damage behavior in a metastable titanium alloy10.1016/j.ijplas.2021.103103 ↗
55. In situ XPS analysis of tribo-chemical behavior in titanium alloy exposed to fretting wear under the vacuum environments10.1007/s11249-024-01842-8 ↗
56. High-cycle fatigue resistance in beta-titanium alloys10.1007/s11837-000-0097-x ↗
57. Morphology characteristics of α precipitates related to the crystal defects and the strain accommodation of variant selection in a metastable β titanium alloy10.1016/j.jmst.2021.01.090 ↗
58. Variability of hardening phase morphology and topology in pseudo-β-titanium alloys quenched for β-structure10.1007/s11015-021-01200-2 ↗
59. Compressive deformation of a metastable β titanium alloy undergoing a stress-induced martensitic transformation: the role of β grain size10.1016/j.msea.2020.139919 ↗
60. Effect of α phase fraction on the dynamic mechanical behavior of a dual-phase metastable β titanium alloy Ti–10V–2Fe–3Al10.1016/j.msea.2021.141322 ↗
61. Compliance of elastic bodies in contact10.1115/1.4009973 ↗
62. Effects of morphology on the mechanical behavior of a dual phase Fe/2Si/0.1C steel10.1007/BF02648546 ↗
63. Design of low hardness abrasion resistant steels10.1016/j.wear.2013.01.002 ↗
65. Design of metastable β-Ti alloys with enhanced mechanical properties by coupling αs precipitation strengthening and TRIP effect10.1016/j.msea.2022.142696 ↗
66. Development of sub-grained α+β Ti alloy with high yield strength showing twinning- and transformation-induced plasticity10.1016/j.jallcom.2019.152102 ↗
67. Effect of microstructure variations on the formation of deformation-induced martensite and associated tensile properties in a β metastable Ti alloy10.1007/s11661-000-0105-3 ↗
68. Toughening of titanium alloys by twinning and martensite transformation10.1023/A:1015456026919 ↗
69. The effect of grain size and composition on the fracture toughness of Ti–Al–Nb alloys undergoing stress-induced martensitic transformation10.1016/j.msea.2007.10.005 ↗
70. Effect of martensite plasticity on the deformation behavior of a low-carbon dual-phase steel10.1007/s11661-006-9023-3 ↗
71. Effects of martensite morphology and volume fraction on quasi-static and dynamic deformation behavior of dual-phase steels10.1007/s11661-998-0328-2 ↗
72. Influence of ferrite-martensite microstructural morphology on tensile properties of dual-phase steel10.1007/BF00356631 ↗
73. Martensitic transformation, shape memory effect and superelasticity of Ti-Nb binary alloys10.1016/j.actamat.2006.01.019 ↗
74. Achieving gradient martensite structure and enhanced mechanical properties in a metastable β titanium alloy10.1007/s11661-019-05157-5 ↗
75. Dry sliding wear characteristics of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy at various sliding speeds10.1007/s11661-015-3019-9 ↗