In-situ synthesis Xp/Al0.25CoCrFeNi (X=Al2O3, TiB2, ZrB2) high entropy matrix composites
Source abstract
Abstract
The strength-ductility trade-off is a common dilemma in the field of high entropy alloys (HEAs). In this study, 0.6 vol% X p/Al 0.25CoCrFeNi (X=Al 2O 3, TiB 2, ZrB 2) composites were fabricated via vacuum arc melting, followed by cold rolling and annealing. The thermal stability of three types of reinforcement particles and their effects on the microstructures and mechanical properties of the composites were studied in detail. The three types of particles exhibit high thermal stability during the melting and processing process, with the Al 2O 3 particle being the most stable. The Al 2O 3 particles possess a size below 100 nm in average and are uniformly distributed. With normalized grain size, the Al 2O 3p/Al 0.25CoCrFeNi composite demonstrates the most effective particulate strengthening effect. The yield strength, ultimate strength and elongation of 0.6 vol% Al 2O 3p/Al 0.25CoCrFeNi composite are 317 MPa, 610 MPa and 57.0 %, respectively, increased by 8.2 %, 2.2 % and 2.2 % compared with the Al 0.25CoCrFeNi high entropy alloy. The 2nd twin only occurs in Al 2O 3p/Al 0.25CoCrFeNi composite during the tensile process, which enhances the twinning density. The synchronous increase in strength and ductility of the Al 2O 3p/Al 0.25CoCrFeNi composite could be ascribed to the generation of higher density deformation twins and stacking faults, offering a potential solution to overcoming the trade-off between strength and ductility.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. Chemical inhomogeneities in high-entropy alloys help mitigate the strength-ductility trade-off10.1016/j.pmatsci.2024.101252 ↗
4. Hot deformation behavior analysis of as-cast CoCrFeNi high entropy alloy using Arrhenius-type and artificial neural network models10.1016/j.intermet.2024.108240 ↗
5. Constitutive modelling of hot deformation behaviour of a CoCrFeMnNi high-entropy alloy10.1080/14686996.2020.1714476 ↗
6. Dynamic softening kinetics of Al0.3CoCrFeNi high-entropy alloy during high temperature compression and its correlation with the evolving microstructure and micro-texture10.1016/j.matchar.2023.112693 ↗
7. Dynamic recrystallization behavior of the equiatomic FeCoCrNi high-entropy alloy during high temperature deformation10.1016/j.jmrt.2022.07.055 ↗
8. A study of hot compression behavior of an as-cast FeCrCuNi2Mn2 high-entropy alloy10.1016/j.jallcom.2021.162732 ↗
9. BCC+L21 dual-phase Cu40Al20Ti20V20 near-eutectic high-entropy alloy with a combination of strength and plasticity10.1016/j.jallcom.2022.164683 ↗
10. Effect of microstructure evolution on wear resistance of equal molar CoCrFeNi high-entropy alloy10.1007/s12598-023-02384-z ↗
11. Dynamic recrystallization behavior of single-phase BCC structure AlFeCoNiMo0.2 high-entropy alloy10.1016/j.jmrt.2023.02.074 ↗
12. Phase stability of TiAl-based BCC high entropy alloys10.1016/j.intermet.2023.107893 ↗
13. Towards high-entropy alloys with high-temperature corrosion resistance and structural stability10.1016/j.jmst.2023.07.035 ↗
14. Revealing the inhomogeneous nature of microstructure and texture evolution in the cold-rolled CoCrFeMnNi alloy during static recrystallization10.1016/j.jallcom.2024.174727 ↗
15. Low cycle fatigue performances of Al0.3CoCrFeNi high entropy alloys: In situ neutron diffraction studies on the precipitation effects10.1016/j.intermet.2024.108241 ↗
16. Thermal oxidation characteristics of Fe(CoCrMnNi) medium and high-entropy alloys10.1016/j.intermet.2020.106757 ↗
17. Effect of Cu content on the microstructure and corrosion resistance of AlCrFeNi3Cux high entropy alloys10.1016/j.corsci.2023.111313 ↗
18. Effect of Mo addition on microstructural evolution and corrosion behaviors of AlCrFeNi3 eutectic high-entropy alloy10.1016/j.corsci.2024.111879 ↗
19. Enhancing mechanical properties of Al0.25CoCrFeNi high-entropy alloy via cold rolling and subsequent annealing10.1016/j.jallcom.2020.154645 ↗
20. Microstructure and mechanical properties of in-situ TiC particle-reinforced Fe1.2MnCo0.8 medium-entropy alloy matrix composites
21. High entropy alloy FeCoNiCu matrix composites reinforced with in-situ TiC particles and graphite whiskers10.1016/j.matchemphys.2018.09.022 ↗
22. In situ FeCrB whiskers and TiB particles strengthened Fe1.2MnNi0.8Cr matrix composites10.1016/j.matchar.2021.111436 ↗
23. Microstructures and mechanical properties of in-situ FeCrNiCu high entropy alloy matrix composites reinforced with NbC particles10.1016/j.intermet.2020.106983 ↗
24. Synergistic strengthening of FeCrNiCo high entropy alloys via micro-TiC and nano-SiC particles
25. Microstructure and mechanical properties of novel CrCoNi–Al2O3P medium entropy alloy-matrix composites10.1016/j.intermet.2020.107057 ↗
26. In-situ TiC particles strengthen and ductilize Fe1.2MnNi0.8Cr high entropy alloy10.1016/j.intermet.2021.107398 ↗
27. Effects of ZrB2 nanoparticles on the microstructures and tensile properties of a hot extruded in situ AA6111 composite10.1007/s12540-022-01192-x ↗
28. S. Lu, Study on the microstructure and properties of in situ high entropy alloys matrix composite, Harbin Institute of Technology, Harbin, 2008.
29. Influence of aluminum content on the microstructure and properties of the in-situ TiC reinforced AlxFeCoNiCu high entropy alloy matrix composites10.1016/j.msea.2018.11.120 ↗
30. Excellent mechanical properties of in-situ TiC/FeCrNiCuV0.1 high entropy alloy matrix composites10.1016/j.matlet.2019.126729 ↗
31. In situ TiC/FeCrNiCu high-entropy alloy matrix composites: reaction mechanism, microstructure and mechanical properties10.1007/s40195-020-01084-2 ↗
32. Effect of cooling rate upon the microstructure and mechanical properties of in-situ TiC reinforced high entropy alloy CoCrFeNi10.1016/j.jmst.2019.12.002 ↗
33. Effect of Nb content on mechanical reinforcement of the Cu-10Fe composites10.1016/j.jallcom.2023.171540 ↗
34. Effect of cryogenic rolling and intermediate aging on mechanical reinforcement of the Cu-Fe-Nb composites10.1016/j.matchar.2023.113469 ↗
35. In-situ TiC/Fe0.6MnNi1.4 medium entropy alloy matrix composites with excellent strength-ductility synergy10.1016/j.ceramint.2021.06.042 ↗
36. Strengthening FeCrNiCu high entropy alloys via combining V additions with in-situ TiC particles10.1016/j.scriptamat.2021.113724 ↗
37. Microstructure and mechanical properties of in-situ TiC reinforced FeCoNiCu2.0 high entropy alloy matrix composites10.1016/j.msea.2021.141671 ↗
38. Enhanced tensile properties of CrMnFeCoNi0.8 high entropy alloy with in-situ TiC particles10.1016/j.intermet.2022.107639 ↗
39. Microstructure and mechanical properties of in-situ nano γ-Al2O3p/A356 aluminum matrix composite10.1016/j.jallcom.2019.02.045 ↗
40. Microstructure study of hot rolling nanosized in-situ Al2O3 particle reinforced A356 matrix composites10.1016/j.jallcom.2020.157107 ↗
41. Microstructures, mechanical properties, and aging behavior of hybrid-sized TiB2 particulate-reinforced 2219 aluminum matrix composites10.1016/j.msea.2021.142180 ↗
42. Evolution of microstructure and mechanical properties of graphene nanoplates and ZrB2 nanoparticles reinforced AA6111 composites during hot rolling deformation10.1016/j.jallcom.2022.165910 ↗
43. Boron doped ultrastrong and ductile high-entropy alloys10.1016/j.actamat.2018.04.004 ↗
44. Mechanical behavior in boron-microalloyed CoCrNi medium-entropy alloy studied by in situ high-energy X-ray diffraction10.1016/j.msea.2020.139600 ↗
45. Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0.3CoCrFeNi high entropy alloy10.1016/j.matdes.2017.02.072 ↗
46. Formation of ultrafine-grained microstructure in Al0.3CoCrFeNi high entropy alloys with grain boundary precipitates10.1016/j.matlet.2017.04.072 ↗
47. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
48. The impact of chemical short-range order on the thermophysical properties of medium- and high-entropy alloys10.1016/j.matdes.2024.112724 ↗
49. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.07.038 ↗
50. Critical stress for twinning nucleation in CrCoNi-based medium and high entropy alloys10.1016/j.actamat.2018.02.037 ↗
51. Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi10.1038/ncomms10143 ↗
52. Deformation mechanisms of Mo alloyed FeCoCrNi high entropy alloy: In situ neutron diffraction10.1016/j.actamat.2017.01.034 ↗
53. Tuning deformation mechanisms of face-centered-cubic high-entropy alloys via boron doping10.1016/j.jallcom.2022.165103 ↗
54. Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0.2 high-entropy alloy at room and cryogenic temperatures10.1016/j.actamat.2018.11.049 ↗
55. Effect of Zr on phase separation, mechanical and corrosion behavior of heterogeneous CoCrFeNiZr high-entropy alloy10.1016/j.jmst.2021.08.062 ↗