journal article·2025-01

Mechanism of the dependence of precipitation behavior on stress level during stress-aging in an Al-Zn-Mg alloy

Duo Zhang, Haichang Jiang, Zhenjie Cui, Xudong Liu, Lijian Rong

Publisher page

Abstract

Elastic stress plays a crucial role in controlling the precipitation characteristics of precipitates during the artificial aging of age-hardening metal materials. This study investigates the effects of stress level on the precipitation of precipitates in an Al-Zn-Mg alloy, using a combination of small-angle X-ray scattering, transmission electron microscopy, and differential scanning calorimetry to provide a quantitative comparison of the precipitates. The results demonstrate that the hardness of stress-aged alloy almost monotonically increases with higher applied external stress. Moreover, the precipitation behavior of precipitates varies markedly under different stress conditions. The studied alloy aged under low stress levels predominantly exhibited semi-coherent η` phases characterized by higher precipitate number density (6.0 ∼ 7.0 × 10 22 m −3) and smaller precipitate size (3.28 ∼ 3.66 nm) compared to stress-free aged alloy (∼1.9 × 10 22 m −3, ∼5.46 nm). Under high stress levels, enhanced dislocation diffusion and aggregation promote the heterogeneous nucleation and the formation of coarse η phases. This work provides further insights into manipulating the precipitation behavior of Al-Zn-Mg alloy through applied stress field, potentially offering solutions to achieve superior comprehensive properties in these alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Reversion and re-aging of a peak aged Al-Zn-Mg-Cu alloy10.1016/j.scriptamat.2020.07.049 ↗
2. Effect of quenching rate on strengthening behavior of an Al-Zn-Mg-Cu alloy during natural ageing10.1016/j.msea.2020.139900 ↗
3. Microstructure evolution of annealed 7075 aluminum alloy and its influence on room-temperature plasticity10.1016/j.matdes.2020.109192 ↗
4. Enhancing stress corrosion cracking resistance of low Cu-containing Al-Zn-Mg-Cu alloys by slow quench rate10.1016/j.matdes.2018.107558 ↗
5. Synchronous improvement of mechanical properties and stress corrosion resistance by stress-aging coupled with natural aging pre-treatment in an Al-Zn-Mg alloy with high recrystallization fraction10.1016/j.jmst.2021.11.068 ↗
6. Two-stage double peaks ageing and its effect on stress corrosion cracking susceptibility of Al-Zn-Mg alloy10.1016/j.jmst.2017.05.008 ↗
7. Variation of nanoparticle fraction and compositions in two-stage double peaks aging precipitation of Al-Zn-Mg alloy10.1186/s11671-018-2542-1 ↗
8. Formation of solute nanostructures in an Al-Zn-Mg alloy during long-term natural aging10.1016/j.jallcom.2019.153572 ↗
9. Corrosion behavior and mechanical properties of Al-Zn-Mg aluminum alloy weld10.1016/j.corsci.2017.05.007 ↗
10. Studies on aging and corrosion properties of cryorolled Al-Zn-Mg-Cu (AA7075) Alloy10.1007/s12666-017-1064-3 ↗
11. Effect of deep cryogenic treatment on improving the high-temperature impact resistance of Al–Zn–Mg–Cu alloy10.1016/j.msea.2024.146846 ↗
12. Cavitation erosion of the AA7050 aluminum alloy in 3.5 wt% NaCl solution—Part 1: mitigating effect by corrosion10.1016/j.corsci.2024.112012 ↗
13. Comprehensive improvement of stress corrosion cracking resistance and strength by retrogression and re-aging in Al-8.9Zn-2.6Mg-1.7Cu alloy10.1016/j.jallcom.2021.162310 ↗
14. Effect of recrystallization and heat treatment on strength and SCC of an Al-Zn-Mg-Cu alloy10.1016/j.jallcom.2013.07.177 ↗
15. Stress aging of Al–xCu alloys: experiments10.1016/S1359-6454(01)00119-7 ↗
16. Effect of stress during aging on precipitation of theta' in Al-4 Wt Pct Cu10.1007/BF02658406 ↗
17. Variant selection and coarsening during stress aging and creep deformation of HAYNES® 244® alloy10.1007/s11837-024-06432-6 ↗
18. Stress-relaxation ageing behavior and microstructural evolution under varying initial stresses in an Al-Cu alloy: experiments and modeling10.1016/j.ijplas.2019.102646 ↗
19. Revisit the stress-orienting effect of θ′ in Al-Cu single crystal during stress aging10.1016/j.matchar.2017.11.053 ↗
20. Sequential development of flagellar defects in spermatids and epididymal spermatozoa of selenium-deficient rats10.1530/rep.1.00103 ↗
21. A comparison of the effects of ageforming on the precipitation behaviour in 2xxx, 6xxx and 7xxx aerospace alloys
22. Materials aspects of age-forming of Al-Cu alloys10.1016/S0924-0136(01)00795-6 ↗
23. Effects of preferentially aligned precipitates on plastic anisotropy in Al-Cu-Mg-Ag and Al-Cu alloys10.1016/S0921-5093(98)00826-0 ↗
24. Effects of stress aging treatment on the microstructure, mechanical properties and electrochemical corrosion behavior of Al-Zn-Mg-Cu alloy10.1016/j.jallcom.2024.174686 ↗
25. Influence of stress-aging processing on precipitates and mechanical properties of a 7075 aluminum alloy10.1002/adem.201700583 ↗
26. Evolution of precipitates during two-stage stress-aging of an Al-Zn-Mg-Cu alloy10.1016/j.jallcom.2016.05.161 ↗
27. Influence of elastic tensile stress on aging process in an Al-Zn-Mg-Cu alloy10.1016/j.matlet.2013.04.095 ↗
28. Microstructural interactions during stress ageing a 7475 aerospace alloy
29. Achieving excellent strength-ductility combination in an Inconel 625 superalloy via short-term stress-aging treatment10.1016/j.scriptamat.2023.115458 ↗
30. Effect of stress-aging treatment on the mechanical and corrosion properties of Al-Zn-Mg-Cu alloy10.1016/j.msea.2022.142791 ↗
31. Precipitation kinetics in an Al-Zn-Mg alloy during stress-aging10.1016/j.jallcom.2021.158680 ↗
32. Performance of precipitates in the stress aging treatment of 7075 Al alloy10.4028/www.scientific.net/AMR.756-759.93 ↗
33. Enhanced matrix precipitation of T1 (Al2CuLi) phase in AA2055 Al-Li alloy during stress aging process10.1016/j.msea.2021.142057 ↗
34. Enhanced age hardening response and precipitation evolution of elastic stress aged Mg–Zn alloys10.1016/j.jallcom.2020.158513 ↗
35. Coarsening of γ′ in Ni-Al alloys aged under uniaxial compression:: I.: Early-stage kinetics10.1016/S1359-6454(03)00329-X ↗
36. Mechanism of stress aging in Al-Cu(-Mg-Ag) alloys
37. Effect of pre-ageing treatment on second nucleating of GPII zones and precipitation kinetics in an ultrafine grained 7075 aluminum alloy10.1016/j.matdes.2019.108402 ↗
38. An atomic scale structural investigation of nanometre-sized η precipitates in the 7050 aluminium alloy10.1016/j.actamat.2019.05.041 ↗
39. Quantitative study of precipitates in an Al-Zn-Mg-Cu alloy aged with various typical tempers10.1016/j.msea.2013.09.005 ↗
40. Transformations and structures in the Al-Zn-Mg alloy system: a diffraction study using synchrotron radiation and electron precession10.1016/j.msea.2010.10.001 ↗
41. Characterisation of the composition and volume fraction of η′ and η precipitates in an Al–Zn–Mg alloy by a combination of atom probe, small-angle X-ray scattering and transmission electron microscopy10.1016/j.actamat.2005.03.004 ↗
42. Aging behavior and precipitate characterization of a high Zn-containing Al-Zn-Mg-Cu alloy with various tempers10.1016/j.matdes.2016.03.150 ↗
43. Effect of various aging treatment on thermal stability of a novel Al-Zn-Mg-Cu alloy for oil drilling10.1016/j.msea.2020.140490 ↗
44. Precipitation hardening and intergranular corrosion behavior of novel Al-Mg-Zn(-Cu) alloys10.1016/j.jallcom.2020.157199 ↗
45. Analysis of age hardening precipitates of Al-Zn-Mg-Cu alloys in a wide range of quenching rates using small angle X-ray scattering10.1016/j.matdes.2018.01.037 ↗
46. Mechanism for enhanced precipitation strengthening due to the addition of copper to Al-Zn-Mg alloys with high Zn/Mg ratio10.1016/j.matdes.2023.112295 ↗
47. The nucleation of precipitates: The system Al-Zn-Mg10.1016/0001-6160(65)90067-2 ↗
48. The oriented growth of precipitates on dislocations in Al-Zn-Mg—part I. Experimental observations10.1016/0001-6160(80)90073-5 ↗
49. On the influence of dislocations on precipitation in an Al-Zn-Mg alloy
50. Influence of predeformation on ageing in an Al-Zn-Mg alloy -: I.: Microstructure evolution and mechanical properties10.1016/S1359-6454(98)00293-6 ↗
51. Tailored Mg and Cu contents affecting the microstructures and mechanical properties of high-strength Al-Zn-Mg-Cu alloys10.1016/j.msea.2016.01.039 ↗
52. Precipitation kinetics and structure of η precipitates in 7N01 aluminium alloy10.1080/02670836.2018.1545290 ↗
53. Porter · 2009
54. The natural ageing effect on pre-ageing kinetics of Al-Zn-Mg alloy10.1016/j.jallcom.2018.10.338 ↗
55. Atomic Radii in Crystals10.1063/1.1725697 ↗
56. Gottstein · 2004