journal article·2024-12

Unique flake-shaped sulfur morphology favored by the binder-free electrophoretically deposited TiO2 layer as a promising cathode structure for Li-S batteries

S. Ghashghaie, Samson H.S. Cheng, J. Fang, H.K. Shahzad, G. Muhyodin, H. Liu, C. Liu, Robin L.W. Ma, C.Y. Chung

Publisher page

Abstract

Metal oxides have been extensively studied as catalyst additives in Li-S batteries due to their high affinity for soluble lithium polysulfides (LiPSs). The present study developed a novel carbon nanomaterials- and binder-free 3D sulfur host by electrophoretic deposition (EPD) of TiO2 nanoparticles on carbon fiber paper (CFP). Benefiting from the unique well-connected TiO2 porous layer formed by EPD, the initial discharge capacity of Li-S battery was increased from 1160 mAh g−1 in conventional cast TiO2/binder/S cathode (Cast:CFP/PVDF/TiO2/S) to 1310 mAh g−1 in the EPD:CFP/TiO2/S cathode, along with an overpotential drop of 16 %. Electron microscopic studies at 100% state-of-charge (SoC) revealed that while notorious sulfur particulates were formed on Cast:CFP/PVDF/TiO2/S, the surface of EPD:CFP/TiO2/S was covered with flake-shaped sulfur precipitates. The formation of sulfur flakes effectively suppressed pulverization in EPD:CFP/TiO2/S, leading to superior electrochemical performance and cycle life. Microstructural studies and real-time EIS investigations revealed that sulfur flakes nucleated across the Li2S matrix at the initial stages of charge and grew vertically from the sulfur/TiO2 interface. The preferential growth mechanism of sulfur flakes was attributed to the superior surface conductance of the EPD-TiO2 film enabled by the ordered clusters formed during EPD, enhancing the kinetics of electrocatalytic reactions of polysulfides at the TiO2/sulfur interface. Our results show that developing novel methods to modify the morphology of secondary sulfur upon cycling is critical for enhancing charge-discharge performance in Li-S batteries. © 2024 Elsevier B.V.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Chemical Synthesis and Characterization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. 3D MXene architectures as sulfur hosts for high-performance lithium-sulfur batteries10.1016/j.jechem.2021.08.040 ↗
2. Reinforced polysulfide barrier by g-C3N4/CNT composite towards superior lithium-sulfur batteries10.1016/j.jechem.2020.05.036 ↗
3. Key parameters in design of lithium sulfur batteries10.1016/j.jpowsour.2014.07.008 ↗
4. Realizing high-performance lithium-sulfur batteries via rational design and engineering strategies10.1016/j.nanoen.2021.105761 ↗
5. Investigating the Electrocatalysis of a Ti3C2/Carbon Hybrid in Polysulfide Conversion of Lithium–Sulfur Batteries10.1021/acsami.9b23006 ↗
6. One dimensional carbon-based composites as cathodes for lithium-sulfur battery10.1016/j.jmst.2021.12.048 ↗
7. Recent research trends in Li–S batteries10.1039/C8TA01483C ↗
8. A systematic correlation between morphology of porous carbon cathode and electrolyte in lithium-sulfur battery10.1016/j.jechem.2021.03.036 ↗
9. Recent advances in chemical adsorption and catalytic conversion materials for Li–S batteries10.1016/j.jechem.2019.07.001 ↗
10. Catalyzing the polysulfide conversion for promoting lithium sulfur battery performances: a review10.1016/j.jechem.2020.06.009 ↗
11. Calculation of TiO2 surface and subsurface oxygen vacancy by the screened exchange functional10.1021/acs.jpcc.5b02430 ↗
12. Hierarchical sulfur-impregnated hydrogenated {TiO}2mesoporous spheres comprising anatase nanosheets with highly exposed (001) facets for advanced Li-S batteries10.1088/0957-4484/27/4/045403 ↗
13. Mild-method synthesised rGO–TiO2 as an effective Polysulphide–Barrier for Lithium–Sulphur batteries10.1016/j.jallcom.2020.155341 ↗
14. TiO2-modified red phosphorus nanosheets entangled in carbon nanotubes for high performance lithium ion batteries10.1016/j.electacta.2018.12.010 ↗
15. Defective TiO2-graphene heterostructures enabling in-situ electrocatalyst evolution for lithium-sulfur batteries10.1016/j.jechem.2021.04.008 ↗
16. TiO2 feather duster as effective polysulfides restrictor for enhanced electrochemical kinetics in lithium–sulfur batteries10.1002/smll.201701013 ↗
17. High-performance nitrogen-doped titania nanowire decorated carbon cloth electrode for lithium-polysulfide batteries10.1016/j.electacta.2017.04.171 ↗
18. Hierarchical TiO2 spheres as highly efficient polysulfide host for lithium-sulfur batteries
19. Electrophoretically deposited binder-free 3-D carbon/sulfur nanocomposite cathode for high-performance Li–S batteries10.1016/j.jechem.2019.12.015 ↗
20. Electrophoretic deposition as a fabrication method for Li-ion battery electrodes and separators – A review10.1016/j.jpowsour.2022.231448 ↗
21. Binder-free germanium nanoparticle decorated multi-wall carbon nanotube anodes prepared via two-step electrophoretic deposition for high capacity Li-ion batteries10.1039/D3NH00501A ↗
22. A review of electrophoretic deposition of metal oxides and its application in solid oxide fuel cells10.1016/j.cis.2020.102102 ↗
23. Elucidating the role of electrophoretic mobility for increasing yield in the electrophoretic deposition of nanomaterials10.1016/j.jcis.2020.02.103 ↗
24. Electrophoretic deposition of network-like carbon nanofiber as a conducting substrate for nanostructured nickel oxide electrode10.1016/j.elecom.2009.01.034 ↗
25. Highly conductive NMP-free carbon-coated nano-lithium titanate/carbon composite electrodes via SBR-assisted electrophoretic deposition10.1016/j.electacta.2018.12.166 ↗
26. A review on fundamentals and applications of electrophoretic deposition (EPD)10.1016/j.pmatsci.2006.07.001 ↗
27. Application of the multi-step EPD technique to fabricate thick TiO 2 layers: Effect of organic medium viscosity on the layer microstructure10.1021/jp306976p ↗
28. Hybrid anatase/rutile nanodots-embedded covalent organic frameworks with complementary polysulfide adsorption for high-performance lithium–sulfur batteries10.1021/acscentsci.9b00846 ↗
29. XPS and FTIR surface characterization of TiO2 particles used in polymer encapsulation10.1021/la0015213 ↗
30. Tailoring Surface Acidity of Metal Oxide for Better Polysulfide Entrapment in Li-S Batteries10.1002/adfm.201602264 ↗
31. Low-Cost TiS2 as hole-transport material for perovskite solar cells10.1002/smtd.201700250 ↗
32. A highly efficient polysulfide mediator for lithium–sulfur batteries10.1038/ncomms6682 ↗
33. Polyhedral TiO2 particle-based cathode for Li-S batteries with high volumetric capacity and high performance in lean electrolyte10.1016/j.cej.2020.125670 ↗
34. Mesoporous TiO2 nanocrystals/graphene as an efficient sulfur host material for high-performance lithium–sulfur batteries10.1021/acsami.6b09479 ↗
35. A facile synthesis of mesoporous TiO2 sub-microsphere host for long life lithium-sulfur battery cathodes10.1016/j.electacta.2017.04.007 ↗
36. TiO2 nanowire array as a polar absorber for high-performance lithium-sulfur batteries10.1016/j.electacta.2018.01.038 ↗
37. Single-wall carbon nanotube network enabled ultrahigh sulfur-content electrodes for high-performance lithium-sulfur batteries10.1016/j.nanoen.2017.10.053 ↗
38. Electrochemical Impedance Spectroscopy Study of a Lithium/Sulfur Battery: Modeling and Analysis of Capacity Fading10.1149/2.026304jes ↗
39. Mathematical modeling of the charging process of Li-S batteries by incorporating the size-dependent Li2S dissolution10.1016/j.electacta.2018.11.159 ↗
40. Modeling of lithium-sulfur batteries incorporating the effect of Li2S precipitation10.1016/j.jpowsour.2016.10.063 ↗
41. Achieving three-dimensional lithium sulfide growth in lithium-sulfur batteries using high-donor-number anions10.1038/s41467-018-07975-4 ↗
42. Effects of brownian motion on electrical double layer
43. Effect of dispersing media on microstructure of electrophoretically deposited TiO2 nanoparticles in dye-sensitized solar cells10.1016/j.apsusc.2011.05.002 ↗
44. Electron transport in electrodes consisting of metal oxide nano-particles filled with electrolyte solution10.1016/S1386-9477(02)00385-5 ↗
45. Self-gating in semiconductor electrocatalysis10.1038/s41563-019-0426-0 ↗
46. Local surface conductivity of transition metal oxides mapped with true atomic resolution10.1039/C8NR02562B ↗
47. Aggregation of pairs of particles on electrodes during electrophoretic deposition10.1016/S0032-5910(99)00271-5 ↗
48. Aggregation Dynamics for Two Particles during Electrophoretic Deposition under Steady Fields10.1021/la0005199 ↗
49. Electrodeposition of well-defined gold nanowires with uniform ends for developing 3D nanoelectrode ensembles with enhanced sensitivity10.1016/j.matchemphys.2018.04.004 ↗
50. Electrodeposition of cobalt nanowires into alumina templates generated by one-step anodization10.1016/j.electacta.2017.11.035 ↗
51. Electrochemical growth of very long (∼80 μm) crystalline Li2O2 nanowires on single-layer graphene covered gold and their growth mechanism10.1021/jacs.0c05392 ↗