A fresh perspective to synthesizing and designing carbon/sulfur composite cathodes using supercritical CO2 technology for advanced Li-S battery cathodes
Source abstract
Abstract
The morphology and surface chemistry of the sulfur host within lithium-sulfur (Li-S) batteries significantly influence the overall battery performance. To investigate this relationship, we employed a non-toxic heat treatment to produce reduced graphene oxide (rGO) with varying degrees of reduction, resulting in distinct surface chemistries. The physicochemical characteristics and electrochemical properties of four differently reduced GO samples and rGO/sulfur composite cathodes developed with supercritical CO 2 technology were examined. Our study established a clear correlation between the specific surface area and porosity of rGO and the electrochemical performance of the corresponding rGO/sulfur composite cathodes. Notably, rGO samples reduced at 350°C (rGO350) exhibited superior discharge capacity and long-term cycling stability compared to those reduced at higher temperatures. This performance enhancement can be attributed to the combination of high surface area, porosity, and an open morphology in rGO350. These findings underscore the importance of optimizing carbon chemistry, microstructure, and cathode synthesis strategies in Li-S batteries. By effectively controlling sulfur loading and distribution within the rGO network, we can enhance active material utilization, boost electronic conductivity, and ensure the long-term stability of rGO/sulfur composite cathodes. Our research suggests that SC-CO 2 -assisted synthesis offers a promising approach for designing high-performance carbon/sulfur composite cathodes for Li-S batteries. This method provides a versatile platform for tailoring the rGO morphology and surface chemistry, optimizing battery performance. By carefully considering the interplay between these factors, we can unlock the full potential of Li-S batteries for various applications. • SC-CO2: an excellent hydrophobic solvent that boosts sulfur dissolution and penetration into carbon, improving utilization. • Rapid, green, facile, and highly efficient room temperature synthesis route for high-performance Li-S battery cathodes. • Investigating how adjusting carbon surface chemistry, microstructure, and synthesis method affects cathode performance. • Promising future technology for large-scale electrode synthesis with the least toxicity and energy demands.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Advances in high sulfur loading cathodes for practical lithium-sulfur batteries
2. Room-temperature metal–sulfur batteries: what can we learn from lithium–sulfur?10.1002/inf2.12291 ↗
3. Will lithium-sulfur batteries be the next beyond-lithium ion batteries and even much better?10.1002/inf2.12359 ↗
4. Toward high-sulfur-content, high-performance lithium-sulfur batteries: review of materials and technologies10.1016/j.jechem.2023.02.009 ↗
5. Rechargeable metal-sulfur batteries: key materials to mechanisms10.1021/acs.chemrev.3c00919 ↗
6. Lithium-sulfur batteries: current achievements and further development10.1002/batt.202200467 ↗
7. Design of transition metal carbonitrides (MCNs) as promising anchoring and high catalytic performance materials for lithium-sulfur batteries10.1016/j.jallcom.2022.167786 ↗
8. Reduced graphene oxide wrapped ZnCo layered double hydroxides microsphere as efficient sulfur host in lithium-sulfur batteries10.1016/j.jallcom.2023.172059 ↗
9. Selenium defects of 2D VSe2/CNTs composite as an efficient sulfur host for high-performance Li-S batteries10.1016/j.jallcom.2023.169820 ↗
10. CeO2 composite metal organic framework is used to construct high-performance lithium-sulfur batteries10.1016/j.jallcom.2022.164341 ↗
11. Synthesis of nickel@N-doped carbon nanotube foams for high sulfur-loading lithium-sulfur battery10.1016/j.jallcom.2022.166263 ↗
12. Interface engineering toward stable lithium-sulfur batteries10.1039/D3EE04183B ↗
13. Exploring advances in sulfur composite cathodes for lithium-sulfur batteries: a comprehensive review10.1016/j.est.2024.112347 ↗
14. 3D Electrode architecture of high surface area carbon-sulfur composite as high energy density cathode for lithium-sulfur battery10.1016/j.jallcom.2023.172341 ↗
15. Extending the conversion rate of sulfur infiltrated into microporous carbon in carbonate electrolytes10.1002/batt.202100374 ↗
16. Accurate determination of optimal sulfur content in mesoporous carbon hosts for high-capacity stable lithium-sulfur batteries10.1016/j.carbon.2022.06.036 ↗
17. Status and perspectives of hierarchical porous carbon materials in terms of high-performance lithium–sulfur batteries10.1002/cey2.185 ↗
18. Rechargeable lithium-sulfur batteries10.1021/cr500062v ↗
19. Advances in lithium-sulfur batteries based on multifunctional cathodes and electrolytes10.1038/nenergy.2016.132 ↗
20. Critical role of functional groups containing N, S, and O on graphene surface for stable and fast charging Li-S batteries10.1002/smll.202007242 ↗
21. Supercritical carbon dioxide assisted synthesis of ultra-stable sulfur/carbon composite cathodes for Li– S batteries
22. A sulfur host based on silicon oxycarbide for advanced lithium-sulfur batteries10.1016/j.est.2023.108388 ↗
23. Graphene-Li2S-carbon nanocomposite for lithium-sulfur batteries10.1021/acsnano.5b06716 ↗
24. Effect of morphological variation in three-dimensional multiwall carbon nanotubes as the host cathode material for high-performance rechargeable lithium-sulfur batteries10.1039/D3RA00502J ↗
25. Investigating multiscale spatial distribution of sulfur in a CNT scaffold and its impact on Li-S cell performance10.1021/acs.jpcc.1c02288 ↗
26. Facile and effective synthesis of reduced graphene oxide encapsulated sulfur via oil/water system for high performance lithium sulfur cells10.1039/c2jm16543k ↗
27. Three-dimensional porous carbon composites containing high sulfur nanoparticle content for high-performance lithium-sulfur batteries
28. Low-cost disordered carbons for Li/S batteries: A high-performance carbon with dual porosity derived from cherry pits10.1007/s12274-017-1608-1 ↗
29. A facile in situ sulfur deposition route to obtain carbon-wrapped sulfur composite cathodes for lithium-sulfur batteries10.1016/j.electacta.2012.06.002 ↗
30. Graphene-wrapped sulfur particles as a rechargeable lithium-sulfur battery cathode material with high capacity and cycling stability10.1021/nl200658a ↗
31. Fabrication of tantalum carbide cathode by ball milling processes for advanced lithium–sulfur batteries10.1007/s10853-023-08331-8 ↗
32. Impact of composite preparation method on the electrochemical performance of lithium–sulfur batteries10.1016/j.jallcom.2023.171810 ↗
33. A simple approach to stepwise synthesis of graphene oxide nanomaterial10.4172/2157-7439.1000253 ↗
34. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)10.1515/pac-2014-1117 ↗
35. Characterisation of the surface chemistry of carbon materials by temperature-programmed desorption: an assessment10.1016/j.cattod.2023.114136 ↗
36. New route to synthesize of graphene nano sheets10.13005/ojc/340120 ↗
37. Structural evolution of hydrothermally derived reduced graphene oxide10.1038/s41598-018-25194-1 ↗
38. Simultaneous reduction and functionalization of graphene oxide by 4-hydrazinobenzenesulfonic acid for polymer nanocomposites10.3390/nano6020029 ↗
39. Hierarchical porous carbon-graphene-based Lithium–Sulfur batteries10.1016/j.electacta.2019.05.090 ↗
40. Analysis of heat-treated graphite oxide by X-ray photoelectron spectroscopy10.1007/s10853-013-7630-0 ↗
41. Time dependent thermal treatment of oxidized MWCNTs studied by the electron and mass spectroscopy methods10.1016/j.apsusc.2012.04.127 ↗
42. Studies on LiFePO4 as cathode material using impedance spectroscopy10.1016/j.jpowsour.2010.09.121 ↗
43. The distribution of relaxation times as basis for generalized time-domain models for Li-ion batteries10.1016/j.jpowsour.2012.07.100 ↗
44. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
45. Electrochemical impedance spectroscopy study of lithium–sulfur batteries: useful technique to reveal the Li/S electrochemical mechanism10.1016/j.electacta.2020.136944 ↗
46. Sulfur cathodes with carbon current collector for Li-S cells10.1149/2.149306jes ↗
47. Electrochemical impedance spectroscopy study of a lithium/sulfur battery: modeling and analysis of capacity fading10.1149/2.026304jes ↗
48. Structural design of lithium–sulfur batteries: from fundamental research to practical application10.1007/s41918-018-0010-3 ↗
49. Stabilization of gamma sulfur at room temperature to enable the use of carbonate electrolyte in Li-S batteries10.1038/s42004-022-00626-2 ↗
50. Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions10.1016/j.jpowsour.2012.12.102 ↗
51. Electrochemical (De)lithiation of 1D sulfur chains in Li-S batteries: a model system study10.1021/ja513009v ↗
52. Smaller sulfur molecules promise better lithium’sulfur batteries10.1021/ja308170k ↗
53. Cyclic voltammetry in lithium–sulfur batteries—challenges and opportunities10.1002/ente.201801001 ↗
54. Enhancement of long stability of sulfur cathode by encapsulating sulfur into micropores of carbon spheres10.1039/c002639e ↗
55. Effects of carbon surface area on performance of lithium sulfur battery cathodes10.1016/j.jiec.2013.03.005 ↗
56. Systematic study of effect on enhancing specific capacity and electrochemical behaviors of lithium–sulfur batteries
57. Towards highly stable lithium sulfur batteries: surface functionalization of carbon nanotube scaffold10.1016/j.carbon.2018.01.100 ↗
58. Enhancing lithium-sulphur battery performance by strongly binding the discharge products on amino-functionalized reduced graphene oxide10.1038/ncomms6002 ↗
59. Graphene oxide as a sulfur immobilizer in high performance lithium/sulfur cells10.1021/ja206955k ↗
60. Functionalized graphene-based cathode for highly reversible lithium-sulfur batteries10.1002/cssc.201300782 ↗
61. Functionalized carbon as polysulfide traps for advanced lithium-sulfur batteries10.1021/acs.jpcc.8b00605 ↗
62. Amphiphilic surface modification of hollow carbon nanofibers for improved cycle life of lithium sulfur batteries10.1021/nl304795g ↗
63. Supercritical CO2 mediated incorporation of sulfur into carbon matrix as cathode materials towards high-performance lithium-sulfur batteries10.1039/C7TA08768C ↗
64. Supercritical CO2-assisted fabrication of CeO2 decorated porous carbon/sulfur composites for high-performance lithium sulfur batteries10.1007/s42452-019-0492-6 ↗
65. Supercritical CO2 assisted fabrication of activated carbon-sulfur composite for improved lithium-sulfur batteries10.1016/j.jallcom.2017.02.289 ↗
66. Biomass derived Ni(OH)2@porous carbon/sulfur composites synthesized by a novel sulfur impregnation strategy based on supercritical CO2 technology for advanced Li-S batteries10.1016/j.jpowsour.2017.12.025 ↗