Effects of cold plastic deformation on microstructure and magnetic susceptibility of Au-Pt alloys
Source abstract
Abstract
Formation of the alloys of paramagnetic gold (Au) and diamagnetic platinum (Pt) holds promise for developing materials with ultra-low magnetic susceptibility. This study investigates the effects of cold plastic deformation on the mechanical properties and magnetic susceptibility of Au-29Pt alloys by microstructure characterization. After cold rolling, the Vickers hardness of the Au-Pt alloy increases from 138.35 HV to 218.28 HV at 80 % deformation. Meanwhile, the volume magnetic susceptibility exhibits a change from −19.10 ppm to −28.60 ppm with minor difference between the results measured from different orientations. The crystal orientation of the Au-29Pt alloys changes but no new phases or no textures are formed. With the increase of the deformation level from 0 % to 60 %, EBSD measurements demonstrates a ∼40-fold increment in average geometric dislocation density. The results indicate the formation of new defects, which are identified as edge dislocations and stacking faults via HRTEM. Consequently, the larger diamagnetic susceptibility at a higher deformation level is mainly correlated with the formation of defects. The results of this study could provide useful guidelines for the design of ultra-low magnetic susceptibility alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Magnetic Properties of Alloys · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. From laboratory experiments to LISA Pathfinder: achieving LISA geodesic motion10.1088/0264-9381/28/9/094002 ↗
2. TianQin project and international collaboration
3. Drag-free design based on embedded model control for TianQin project10.1016/j.actaastro.2022.06.031 ↗
4. Theoretical calculations and experimental measurements on the two-component Au-Pt alloys with ultralow magnetic susceptibility10.1103/PhysRevApplied.19.034080 ↗
5. Optimal Pt–Au alloying for efficient and stable oxygen reduction reaction catalysts10.1021/acsami.2c18655 ↗
6. High-temperature oxidation behaviors and surface oxide color of Pd-free, Au-Pt-based metal-ceramic alloys for dental applications10.1007/s13404-017-0200-5 ↗
7. Preparation of an Au-Pt alloy free from artifacts in magnetic resonance imaging10.1016/j.mri.2017.07.006 ↗
8. Magnetic resonance imaging (MRI) compatible ZrX (X = Hf, Mo and Ru) alloys with enhanced mechanical properties as alternative biomedical applications10.1016/j.scriptamat.2019.11.013 ↗
9. Gadolinium-engineered magnetic alloy nanoparticles for magnetic resonance T1/T2 dual-modal and computed tomography imaging10.1021/acs.chemmater.2c02537 ↗
10. Fe-based nanoparticulate metallic alloys as contrast agents for magnetic resonance imaging10.1016/j.biomaterials.2005.02.020 ↗
11. The thermal and magnetic properties of some transition element alloys
12. Low magnetic disturbance analysis and testing of a novel proof mass type for gravitational reference sensor system10.1177/1687814019828455 ↗
13. Dual-phase Au-Pt alloys free from magnetic susceptibility artifacts in magnetic resonance imaging10.1016/j.mri.2021.10.002 ↗
14. Effect of cold rolling and cryogenic treatment on the microstructure and mechanical properties of Fe–32Ni alloy10.3390/met14020174 ↗
15. Microstructure evolution and property of spray-formed Cu-10 wt% Fe alloy during cold rolling
16. Suppression of reverted austenite in cold-rolled maraging steels and its impact on mechanical properties10.1007/s11661-023-07219-1 ↗
17. Thermodynamic assessment of Au–Pt system10.1016/S1003-6326(11)61337-X ↗
18. Preparation and mechanical properties of ultra-high strength superalloy fibers10.1016/j.jallcom.2023.170930 ↗
19. Cold deformation behavior and microstructure evolution of biomedical Cu-containing L605 alloy10.1016/j.jallcom.2024.174005 ↗
20. Effect of cold rolling on the magnetic susceptibility of Zr–14Nb alloy10.1016/j.actbio.2012.10.046 ↗
21. Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect10.1016/j.msea.2018.03.023 ↗
22. d0 ferromagnetism10.1016/j.solidstatesciences.2004.11.012 ↗
23. Defect-induced magnetism in chemically synthesized nanoscale sheets of MgO10.1103/PhysRevB.83.161201 ↗
24. Magnetism of two-dimensional defects in Pd: Stacking faults, twin boundaries, and surfaces10.1103/PhysRevB.74.054405 ↗
25. Electronic and magnetic structure of {111} stacking faults in nickel10.1103/PhysRevB.43.9442 ↗
26. Crystal structure and magnetic state of U2XSi3 (X=Fe, Pt)10.1016/j.jallcom.2005.04.184 ↗