Synergistic enhancement of strength and ductility of Mg-12.8Gd-3.8Y-1.9Zn-0.5Zr alloy by low-temperature solid solution treatment during forging process
Source abstract
Abstract
Forging and low-temperature solid solution treatment to regulate Mg-12.8Gd-3.8Y-1.9Zn-0.5Zr (wt%) alloy were investigated in this paper, which exhibited a heterogeneous microstructure. The alloy demonstrated a yield strength (YS) of 266.68 MPa, an ultimate tensile strength (UTS) of 337.01 MPa, and elongation (EL) of 8.98 %. It was shown that the strength and ductility of the Mg-12.8Gd-3.8Y-1.9Zn-0.5Zr (wt%) alloy were synergistically enhanced. This enhancement can be attributed to the alteration of the second phase particles through low-temperature solid solution treatment, as well as the hardening effect induced by hetero-deformation. The low-temperature solid solution treatment allowed the large-sized brittle Mg 5RE phase to be dissolved, while the deformation-induced dislocation tangle in the coarse grains (CGs) promotes the co-segregation of Gd and Zn elements, resulting in the precipitation-strengthened γ ′ phase. The presence of dynamically precipitated phases within the dynamic recrystallized (DRXed) zone enhanced the strain regulation ability in different regions and inhibited crack propagation. Furthermore, the hetero-deformation induced (HDI) hardening effect, arising from the interaction between CGs and fine grains (FGs) in the heterogeneous microstructure, effectively prevented necking and improved ductility.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Research advances in magnesium and magnesium alloys worldwide in 202010.1016/j.jma.2021.04.001 ↗
2. Recent developments and applications on high-performance cast magnesium rare-earth alloys10.1016/j.jma.2020.06.021 ↗
3. Towards high strength cast Mg-RE based alloys: phase diagrams and strengthening mechanisms10.1016/j.jma.2022.03.008 ↗
4. Effect of aging temperature on the hardening behavior and precipitation evolution of Mg-10Gd alloy10.1016/j.matchar.2022.112580 ↗
5. Effect of addition of rare earth elements on the microstructure, texture, and mechanical properties of extruded ZK60 alloy10.1007/s12540-022-01341-2 ↗
6. Preparation of ultra-high strength Mg-Gd-Y-Zn-Zr alloy by pre-ageing treatment prior to extrusion10.1016/j.jallcom.2021.162490 ↗
7. Ultrahigh specific strength in a magnesium alloy strengthened by spinodal decomposition10.1126/sciadv.abf3039 ↗
8. Microstructure and mechanical property of Mg–10Gd–2Y–1.5Zn–0.5Zr alloy processed by eight-pass equal-channel angular pressing10.1007/s12598-018-1022-1 ↗
9. Study of microstructural evolution, mechanical properties and plastic deformation behavior of Mg-Gd-Y-Zn-Zr alloy prepared by high-pressure torsion10.1016/j.msea.2023.145953 ↗
10. Achieving an ultra-high strength and moderate ductility in Mg–Gd–Y–Zn–Zr alloy via a decreased-temperature multi-directional forging10.1016/j.matchar.2020.110804 ↗
11. Effect of rotating shear extrusion on the microstructure, texture evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy10.1016/j.jallcom.2022.164406 ↗
12. Developing high-strength and ductile Mg-Gd-Y-Zn-Zr alloy sheet via bimodal grain structure coupling with heterogeneously-distributed precipitates10.1080/21663831.2023.2235375 ↗
13. High strength and high ductility achieved in a heterogeneous lamella-structured magnesium alloy10.1080/21663831.2022.2133976 ↗
14. Tailoring precipitates in Mg–12Gd-3Y alloys by Sn addition to obtain superior elevated temperature mechanical properties10.1016/j.msea.2023.145006 ↗
15. Effects of 14H LPSO phase on the dynamic recrystallization and work hardening behaviors of an extruded Mg–Zn–Y–Mn alloy10.1016/j.msea.2020.140727 ↗
16. Microstructures and mechanical properties of Mg–10Gd–6Y–2Zn–0.6Zr(wt%) alloy10.1016/j.jallcom.2011.06.090 ↗
17. Increasing strength and ductility of a Mg–9Al alloy by dynamic precipitation assisted grain refinement during multi-directional forging10.1016/j.msea.2020.139192 ↗
18. Unraveling the effect of deformation-induced phase transformation on microstructure and micro-texture evolution of a multi-axially forged Mg-Gd-Y-Zn-Zr alloy containing the LPSO phase10.1016/j.jmrt.2021.09.035 ↗
19. The quantitative effects of temperature and cumulative strain on the mechanical properties of hot-extruded AZ80 Mg alloy during multi-directional forging10.1016/j.msea.2021.142036 ↗
20. Grain refinement impact on the mechanical properties and wear behavior of Mg-9Gd-3Y–2Zn-0.5Zr alloy after decreasing temperature reciprocating upsetting-extrusion10.1016/j.jma.2021.03.021 ↗
21. Effect of circumferential strain rate on dynamic recrystallization and texture of Mg-13Gd-4Y–2Zn-0.5Zr alloy during rotary backward extrusion10.1016/j.jma.2019.12.012 ↗
22. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
23. Role of second phases and grain boundaries on dynamic recrystallization behavior in ZK60 magnesium alloy10.1016/j.jallcom.2020.157958 ↗
24. On the improved tensile strength and ductility of Mg--Sn--Zn--Mn alloy processed by aging prior to extrusion10.1016/j.jma.2019.07.007 ↗
25. Improved tensile properties of an equal channel angular pressed (ECAPed) Mg-8Sn-6Zn-2Al alloy by prior aging treatment10.1016/j.msea.2017.01.054 ↗
26. Deformation behavior of ultra-strong and ductile Mg-Gd-Y-Zn-Zr alloy with bimodal microstructure10.1007/s11661-018-4507-5 ↗
27. Insights into creep behavior of Mg–14Gd–1Zn–0.4Zr (wt%) alloy containing β- and γ-type precipitates10.1016/j.msea.2023.146065 ↗
28. Unravelling the structure of γ″ in Mg-Gd-Zn: an atomic-scale HAADF-STEM investigation10.1016/j.matchar.2016.08.011 ↗
29. Effect of dynamic precipitation and twinning on dynamic recrystallization of micro-alloyed Mg–Al–Ca alloys10.1016/j.msea.2013.08.019 ↗
30. Optimization in strength-ductility of heterogeneous Mg-13Gd alloy via small extrusion ratio combined with pre-aging10.1016/j.msea.2021.142540 ↗
31. Effects of nanoprecipitates and LPSO structure on deformation and fracture behaviour of high-strength Mg-Gd-Y-Zn-Mn alloys10.1016/j.matchar.2020.110396 ↗
32. Decreasing the mechanical anisotropy of the forged Mg-8.5Gd-2.5Y-1.5Zn-0.5Zr alloy by modulating blocky LPSO particles using multi-directional forging10.1016/j.jma.2022.10.024 ↗
33. Ageing behavior of extruded Mg–8.2Gd–3.8Y–1.0Zn–0.4Zr (wt%) alloy containing LPSO phase and γ′ precipitates
34. Heterogeneous materials: a new class of materials with unprecedented mechanical properties10.1080/21663831.2017.1343208 ↗
35. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility10.1073/pnas.1517193112 ↗
36. Back stress strengthening and strain hardening in gradient structure10.1080/21663831.2016.1153004 ↗
37. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗
38. Synergetic strengthening by gradient structure10.1080/21663831.2014.935821 ↗
39. Effect of the martensite distribution on the strain hardening and ductile fracture behaviors in dual-phase steel10.1016/j.msea.2014.02.058 ↗
40. Integrated experimental–simulation analysis of stress and strain partitioning in multiphase alloys10.1016/j.actamat.2014.07.071 ↗
41. Nanolaminate transformation-induced plasticity–twinning-induced plasticity steel with dynamic strain partitioning and enhanced damage resistance10.1016/j.actamat.2014.11.010 ↗
42. Strain hardening in Fe–16Mn–10Al–0.86C–5Ni high specific strength steel10.1016/j.actamat.2016.02.044 ↗
43. Stress and strain partitioning of ferrite and martensite during deformation10.1007/s11661-009-9824-2 ↗
44. Geometrically necessary dislocation and size-dependent plasticity10.1016/S1359-6462(02)00329-9 ↗
45. Achieving strength and ductility synergy in (CoCrFeNi)94Ti2Al4 high entropy alloy with multi-scale heterogeneous microstructure10.1016/j.intermet.2023.108107 ↗