journal article·2024-11

Thermal deformation behavior of a Ni-Cr-Fe superalloy and its effect on corrosion resistance: A comprehensive analysis of strain rate and temperature effects

Zhiwei Zhao, Jiuxiao Li, Xutong Wang, Yanling Lu, Songlin Wang, Anping Dong

Publisher page

Abstract

Thermal deformation behavior of a Ni-Cr-Fe superalloy billet were investigated by hot compression experiments under temperatures of 900–1200 °C and strain rates of 0.001–1 s −1, and the corrosion properties of the superalloy after thermal deformation were also evaluated by electrochemical tests. Compression experiments determined that lower strain rates and higher temperatures reduce the superalloy`s stress levels. The Arrhenius-type model accurately described the thermal deformation behavior of the superalloy. Furthermore, the optimal hot working domain was identified between 1120 and 1170 °C and strain rates of 0.001–0.01 s −1. Microstructure observations showed that the dynamic recrystallization (DRX), characterized by grain boundary bending nucleation and consumption of numerous dislocations is the main mechanism leading to grain refinement during thermal deformation. The results of the electrochemical corrosion tests proved that the corrosion predominantly occurred near the grain boundaries (GBs) of deformed grains, worsening with increased deformation temperatures.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Recent developments in nickel-based superalloys for gas turbine applications: Review10.1016/j.jallcom.2023.171128 ↗
2. Study of microstructure and mechanical properties of high performance Ni-base superalloy GTD-11110.1016/S0921-5093(01)01709-9 ↗
3. Understanding the oxidation behaviors of a Ni-Co-based superalloy at elevated temperatures through multiscale characterization10.1016/j.corsci.2023.111800 ↗
4. Influence of thermal exposure on microstructural stability and tensile properties of a new Ni-base superalloy10.1016/j.jmrt.2022.11.050 ↗
5. Milling mechanism and chattering stability of Nickel-based superalloy Inconel 71810.3390/ma16175748 ↗
6. The effect of temperature and strain rate on the grain boundary sliding in a CM247 LC Ni-based superalloy processed with laser based powder bed fusion10.1016/j.jmrt.2023.12.131 ↗
7. Hot-working properties of Ni-based superalloy GH4169 in different initial states10.1007/s11665-022-06728-1 ↗
8. High temperature behaviors of a casting Nickel-based superalloy used for 815 °C10.3390/ma14040716 ↗
9. Microstructural development and tensile behavior of a hot isostatically pressed nickel-based superalloy10.1016/j.msea.2019.138461 ↗
10. Evolution of microstructure and δ phase in an aging-treated nickel-based superalloy during hot compression10.1016/j.matchar.2023.112876 ↗
11. Microstructural evolution and constitutive equations of Inconel 718 alloy under quasi-static and quasi-dynamic conditions10.1016/j.matdes.2015.12.157 ↗
12. Hot workability and microstructural evolution of a nickel-based superalloy fabricated by laser-based directed energy deposition10.1016/j.jallcom.2022.165373 ↗
13. Precipitation behavior during high-temperature isothermal compressive deformation of Inconel 718 alloy10.1016/j.msea.2016.09.088 ↗
14. Hot deformation behavior and microstructure of cast Ni-based superalloy IN-100 based on the processing map10.1007/s11661-023-07178-7 ↗
15. Influence of cobalt addition on microstructure and hot workability of IN713C superalloy10.1016/j.matdes.2017.03.014 ↗
16. Hot deformation behavior and processing workability of a Ni-based alloy10.1016/j.jallcom.2018.08.010 ↗
17. Influence of effective strain on the corrosion behavior of nickel-based GH4710 superalloy in chloride solutions10.1016/j.corsci.2022.110386 ↗
18. The influence of heat treatments on the corrosion behaviour of nickel-based alloy 71810.1016/j.jallcom.2019.151781 ↗
19. Effect of water jet cavitation peening on electrochemical corrosion behavior of nickel-based alloy 600 in NaCl solution10.1016/j.matchemphys.2022.127122 ↗
20. Effect of processing parameters on hot compressive deformation behavior of a new Ni–Cr–Co based P/M superalloy10.1016/j.msea.2011.02.051 ↗
21. Evolution of annealing twins in a hot deformed Nickel-based superalloy10.3390/ma15010007 ↗
22. Modeling the initiation of dynamic recrystallization using a dynamic recovery model10.1016/j.jallcom.2011.07.014 ↗
23. Hot deformation behavior, processing maps and microstructural evolution of the Mg-2.5Nd-0.5Zn-0.5Zr alloy10.3390/ma15051745 ↗
24. Constitutive modeling hot tensile behavior of Ti6Al4V alloy by considering phase transformation and damage mechanisms10.1016/j.msea.2023.145887 ↗
25. Grain refinement and weak-textured structures based on the dynamic recrystallization of Mg–9.80Gd–3.78Y–1.12Sm–0.48Zr alloy10.1016/j.jma.2020.06.001 ↗
26. Improved workability for Mg-Y-Zn alloys via increased volume fraction of block LPSO phases10.1016/j.msea.2020.139934 ↗
27. High-temperature tensile characteristics and constitutive models of ultrahigh strength steel10.1016/j.msea.2020.140491 ↗
28. Hot working characteristics of nickel-base superalloy 740H during compression10.1016/j.msea.2012.12.077 ↗
29. Modeling of dynamic material behavior in hot deformation: forging of Ti-624210.1007/BF02664902 ↗
30. Hot deformation characteristics and hot working window of as-cast large-tonnage GH3535 superalloy ingot10.1016/j.jmst.2018.04.001 ↗
31. Hot deformation behaviors of low-alloyed ultrahigh strength steel 30CrMnSiNi2A: Microstructure evolution and constitutive modeling
32. Characterization of hot workability of IN617B alloy using activation energy, Zener-Hollomon parameter and hot processing maps10.1016/j.jmrt.2023.08.259 ↗
33. Effect of strain rate uponplastic flow of steel10.1063/1.1707363 ↗
34. Hot deformation behavior and workability of a Ni-Co based superalloy10.1016/j.jallcom.2020.154618 ↗
35. 2015
36. Mechanical processing and microstructural control in hot working of hot isostatically pressed P/M IN-100 superalloy10.1016/S0921-5093(97)00698-9 ↗
37. Processing maps for hot working of titanium alloys10.1016/S0921-5093(97)00782-X ↗
38. A high-performance Mg-4.9Gd-3.2Y-1.1Zn-0.5Zr alloy via multidirectional forging after analyzing its compression behavior10.1016/j.jmst.2020.08.054 ↗
39. Hot deformation behavior, superplasticity and microstructure evolution of a new hot isostatic pressed nickel-based superalloy10.1016/j.msea.2023.145997 ↗
40. Elucidating the microscopic origin of electrochemical corrosion and electrical conductivity by lattice response to severe plastic deformation in Al-Mn-Si alloy10.1016/j.materresbull.2018.09.011 ↗
41. Influence of hot deformation on the electrochemical behavior of natural oxides of hipped Ti6Al4V10.1016/j.corsci.2015.01.042 ↗
42. Effect of hot deformation process parameters on microstructure and corrosion behavior of 35CrMoV Steel10.3390/ma12091455 ↗
43. In situ impedance spectroscopy study of the electrochemical corrosion of Ti and Ti–6Al–4V in simulated body fluid at 25°C and 37°C10.1016/j.corsci.2009.06.035 ↗
44. Anomalous evolution of corrosion behaviour of warm-rolled type 304 austenitic stainless steel10.1016/j.corsci.2019.04.025 ↗
45. Effect of temperature during hot deformation on the electrochemical behavior of HSLA pipeline steels10.20964/2018.03.15 ↗
46. Necklace formation during dynamic recrystallization: mechanisms and impact on flow behavior10.1016/S1359-6454(97)00233-4 ↗
47. EBSD analysis of hot deformation behavior of Cu-Ni-Co-Si-Cr alloy10.1016/j.matchar.2020.110656 ↗
48. High-temperature deformation characteristics and constitutive model of an ultrahigh strength steel10.1007/s12540-020-00944-x ↗
49. Dynamic recrystallization behavior of a γ′-hardened nickel-based superalloy during hot deformation10.1016/j.jallcom.2014.11.056 ↗
50. The effect of deformation temperature on the microstructure evolution of Inconel 625 superalloy10.1016/j.jnucmat.2011.05.029 ↗
51. High-temperature mechanical properties and dynamic recrystallization of Mo-14Re alloy10.1016/j.matchar.2023.113617 ↗
52. Comparative study of wire arc additive manufactured and wrought ultrahigh-strength steels: flow behavior and microstructure evolution10.1007/s12540-023-01428-4 ↗
53. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
54. Hot deformation behavior of an antibacterial Co–29Cr–6Mo–1.8Cu alloy and its effect on mechanical property and corrosion resistance10.1016/j.jmst.2016.09.025 ↗
55. In situ impedance spectroscopy study of the electrochemical corrosion of orthopedic Ti-6Al–7Nb in simulated body fluid10.5185/amlett.2012.9425 ↗
56. Influence of surface modifications on pitting corrosion behavior of nickel-base alloy 718. Part 1: effect of machine hammer peening10.1016/j.corsci.2013.08.007 ↗