Microstructure evolution and enhanced mechanical performance of multilayer MXene-reinforced silver matrix composites
Source abstract
Abstract
In this study, multilayer MXenes were first incorporated into an Ag matrix through a hetero-agglomeration process followed by spark plasma sintering (SPS), with the microstructural evolution of MXenes during composite fabrication characterized using transmission electron microscopy. The partial decomposition of MXene and transformation into rutile-TiO 2 nanoparticles occurred during SPS, facilitating the generation of submicron Ag grains through effective pinning. As revealed by the Vickers hardness measurements and tensile tests, the addition of 3 vol% MXene increased the hardness and yield strength of the Ag matrix from 57.7 HV and 97.5 MPa to 116.0 HV and 129.1 MPa, representing increases of 101 % and 32 %, respectively. Quantitative calculations suggested that the improved mechanical properties of the MXene/Ag composites were primarily due to grain refinement strengthening. Meanwhile, the electrical and thermal conductivities of the 3 vol% MXene/Ag composite decreased by 9 % and 11 %, respectively. However, the ultimate tensile strength and ductility of the composites were lower than those of pure Ag, attributed to the weak MXene-Ag interfacial bonding and fracture surface observations, as well as the presence of accordion-like structures in MXene. Compared with conventional Ag matrix composites, MXene/Ag composites demonstrate a superior balance of mechanical and physical properties, making them highly suitable for applications in electrical devices. This work enhances our understanding of the interface phenomena between MXenes and metals, providing new insights for designing novel Ag matrix composites for use in conductive devices.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Aluminum Alloys Composites Properties · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. High-power electric vehicle charging: Low-carbon grid integration pathways with stationary lithium-ion battery systems and renewable generation10.1016/j.apenergy.2022.120541 ↗
2. Arc-erosion behavior of boric oxide-reinforced silver-based electrical contact materials produced by mechanical alloying10.1007/s11664-014-3399-4 ↗
3. Ag/graphene composite based on high-quality graphene with high electrical and mechanical properties10.1016/j.pnsc.2019.04.010 ↗
4. Growth and characterization of Ag–Al2O3 composites thin films for thermoelectric power generation applications10.1016/j.ceramint.2021.10.145 ↗
5. Microstructure and mechanical properties of CNT/Ag nanocomposites fabricated by spark plasma sintering10.1080/17458080.2012.680927 ↗
6. A study on the CNTs-Ag composites prepared based on spark plasma sintering and improved electroless plating assisted by ultrasonic spray atomization10.1016/j.jallcom.2017.12.066 ↗
7. Electro-mechanical properties of composite materials for high-current contact applications10.1088/0022-3727/47/12/125501 ↗
8. Morphology-controllable synthesis and thermal decomposition of Ag and Ni oxalate for Ag-Ni alloy electrical contact materials10.1016/j.matdes.2016.06.123 ↗
9. Fabrication of A g–S n O 2 contact materials from gas-atomized A g–S n powder using combined oxidation and ball-milling process10.1111/ijac.12478 ↗
10. Electrical contact characteristics of Ag-SnO₂ materials with increased SnO₂ content
11. Formation and effects of CuO nanoparticles on Ag/SnO2 electrical contact materials10.1016/j.jallcom.2016.12.092 ↗
12. Arc erosion behaviors of AgSnO2 contact materials prepared with different SnO2 particle sizes10.1016/S1003-6326(16)64168-7 ↗
13. Material transfer behavior of AgTiB2 and AgSnO2 electrical contact materials under different currents10.1016/j.matdes.2016.10.056 ↗
14. Enhanced electrical conductivity and hardness of silver-nickel composites by silver-coated multi-walled carbon nanotubes10.1088/0957-4484/26/29/295705 ↗
15. Simultaneous enhancement in mechanical and physical properties of graphene-oxide-reinforced Al matrix composites by trace-Mg-alloying strategy10.1016/j.jmrt.2024.03.176 ↗
16. M. Naguib, M. Kurtoglu, V. Presser, J. Lu, J. Niu, M. Heon, L. Hultman, Y. Gogotsi, M.W. Barsoum, MXenes, Jenny Stanford Publishing2011, pp. 15-29.
17. Elastic properties of 2D Ti3C2T x MXene monolayers and bilayers10.1126/sciadv.aat0491 ↗
18. Improved synthesis of Ti 3C 2 T x MXenes resulting in exceptional electrical conductivity, high synthesis yield, and enhanced capacitance10.1039/D0NR06671K ↗
19. Step-by-step guide for synthesis and delamination of Ti3C2Tx MXene
20. Colloidal gelation in liquid metals enables functional nanocomposites of 2D metal carbides (MXenes) and lightweight metals10.1021/acsnano.9b06207 ↗
21. Chemical stability of Ti3C2 MXene with Al in the temperature range 500–700° C10.3390/ma11101979 ↗
22. Ten years of progress in the synthesis and development of MXenes
23. Significant strengthening effect in few-layered MXene-reinforced Al matrix composites10.1080/21663831.2020.1861120 ↗
24. Structural evolution mechanism during 3D printing of MXene-reinforced metal matrix composites10.1016/j.coco.2021.101034 ↗
25. Heat capacity and thermodynamic functions of TiO2 (B) nanowires10.1016/j.jct.2017.12.016 ↗
26. Tuning tribological, mechanical and electrical properties of Ag-X (X= Al, In, Sn) alloys10.1016/j.triboint.2018.04.020 ↗
27. State of the art and prospects in sliver-and copper-matrix composite electrical contact materials10.1016/j.mtcomm.2023.107256 ↗
28. Comparing the mechanical and thermal-electrical properties of sintered copper (Cu) and sintered silver (Ag) joints10.1016/j.jallcom.2021.158783 ↗
29. Micro/nano-mechanical properties evolution and degradation mechanism of Ti3AlC2 ceramic reinforced Ag-based composites under high-temperature arc corrosion10.1016/j.ceramint.2022.07.313 ↗