journal article·2024-12

Enhanced mechanical properties and oxidation resistance of NbC-Ni cermets via NbN addition

Jinting Peng, Jiyong Yi, Yanjun Zhou, Yang Liu, Jian Li

Publisher page

Abstract

The mechanical properties and oxidation resistance of cutting tool materials are two important factors that can affect their performance. In this work, NbN was used as an additive to improve the mechanical properties and oxidation resistance of NbC-Ni cermets. The results demonstrated that the densification sintering temperature increased with increasing addition of NbN, with the optimized sintering temperature of NbC-Ni cermets containing 10 wt% NbN being 1480 ℃. The incorporation of NbN into NbC-Ni led to the formation of NbCN-Ni cermets. As a result of solution strengthening, the cermet transverse rupture strength (TRS) and hardness were considerably improved. However, the TRS and hardness decreased for the NbC-Ni cermets exceeding 10 wt% NbN owing to the increased porosity and grain growth. With increasing NbN content, the oxidation resistance of NbC-Ni cermets initially increased before decreasing. The best oxidation resistance of NbC-Ni cermets with 10 wt% NbN was due to the higher NbN content and dense structure.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Cemented carbide microstructures: a review10.1016/j.ijrmhm.2018.12.004 ↗
2. Effect of sintering densifcation on micro-scalemechanical and tribological behaviour of niobium carbide
3. Carbide grain growth during the liquid-phase sintering of the alloys NbC-Fe, NbC-Ni, and NbC-Co10.1016/0022-5088(69)90037-X ↗
4. A study of cermets’ wear behavior10.1016/S0043-1648(96)07397-8 ↗
5. The tribological and mechanical properties of niobium carbides (NbC) bonded with cobalt or Fe3Al10.1016/j.wear.2014.09.007 ↗
6. Friction and wear of binder-less niobium carbide10.1016/j.wear.2013.07.013 ↗
7. Microstructure and mechanical properties of WC and Ti(C0.7N0.3) modified NbC solid solution cermets.10.1016/j.jallcom.2020.156594 ↗
8. Microstructure and mechanical properties of WC or Mo2C modifed NbC-Ni cermets10.1016/j.ijrmhm.2020.105440 ↗
9. Microstructure and tribological performance of NbC-Ni cermets modified by VC and Mo2C.10.1016/j.ijrmhm.2017.03.012 ↗
10. Study on the microstructure and mechanical properties of microwave sintered NbC–Ni cermets reinforced by multilayer grapheme.10.1016/j.ceramint.2023.03.136 ↗
11. Influence of AlN addition on the microstructure, mechanical properties and oxidation characteristics of NbC-based cermets.10.1016/j.ijrmhm.2023.106426 ↗
12. Improvement mechanism of the oxidation resistance of Al-doped Ti(C, N)-based cermets: Influence of enriched Al in the subsurface oxide layer10.1016/j.corsci.2022.110722 ↗
13. Fabrication and characterization of NbC-CoCrFeNiMn high-entropy alloy cermets10.1016/j.ijrmhm.2020.105388 ↗
14. Microstructure and mechanical properties of NbC-Ni cermets prepared by microwave sintering10.1515/htmp-2022-0049 ↗
15. Properties of NbC-Co cermets obtained by spark plasma sintering10.1016/j.matlet.2006.05.011 ↗
16. Effect of carbon and tungsten content on the phase equilibria, microstructure, and mechanical properties of (Nb,W)C–Ni cermets10.1111/jace.19069 ↗
17. Effect of different binders and secondary carbides on NbC cermets.10.1007/s10010-022-00583-1 ↗
18. Sputter deposited NbCxNy films: Effect of nitrogen content on structure and mechanical and tribological properties10.1016/j.surfcoat.2014.07.086 ↗
19. Study on microstructure, mechanical properties and corrosion resistance of NbCN-Cu composite films10.1016/j.ijrmhm.2022.105885 ↗
20. Über neuartige Nitrid-und Karbonitrid-Hartmetalle
21. Influence of titanium nitride addition on the microstructure and mechanical properties of TiC-based cermets10.1016/j.ijrmhm.2005.05.008 ↗
22. Cutting and wearing characteristics of TiC-based cermets cutters with nano-TiN addition10.1016/j.jmatprotec.2004.07.087 ↗
23. Ye · 2002 · 686
24. Mechanical properties and microstructure of Ti(C,N) based cermets reinforced by nano-Si3N4 particles10.1016/j.ijrmhm.2010.09.010 ↗
25. Structural and mechanical properties of NbN and Nb-Si-N films: experiment and molecular dynamics simulations
26. Phase evolution and microstructure characteristics of ultrafine Ti(C,N)-based cermet by spark plasma sintering10.1016/j.ijrmhm.2004.03.002 ↗
27. Effect of WC addition on the microstructure and mechanical properties of TiN-based cermets
28. Titanium carbonitride-based cermets: processes and properties10.1016/0921-5093(93)90588-6 ↗
29. Thermodynamic modeling of contact angles on rough, heterogeneous surfaces10.1016/j.cis.2005.07.004 ↗
30. Effect of mismatch degree on mechanical properties of Ni-based single crystal alloy under force-temperature coupling
31. Influence of interface with mismatch dislocations on mechanical properties of Ti/Al nanolaminate10.1063/1.5085455 ↗
32. Microstructure and mechanical properties of NbC matrix cermets using Ni containing metal binder10.1016/j.mprp.2016.05.009 ↗
33. Investigation of the oxidation behavior and high oxidation-resistant mechanism of Ti(C,N)-based cermets10.1016/j.corsci.2020.108959 ↗
34. NbC-Ni coatings deposited by DC reactive magnetron sputtering: effect of Ni content on mechanical properties, thermal stability and oxidation resistance10.1016/j.surfcoat.2018.06.068 ↗
35. Abnormal oxidation behavior of Fe in Ti(C,N)-304ss cermet during early oxidation stage10.1016/j.jallcom.2019.03.008 ↗
36. Infuence of oxygen addition on the oxidation resistance of TiAlN10.1016/j.scriptamat.2022.115148 ↗