Overcoming the strength-ductility trade-off in Fe40Mn40Co10Cr10 high-entropy alloy via nitrogen-doping and hetero-structure design
Source abstract
Abstract
The strength enhancement of face-centered cubic (FCC) high-entropy alloys (HEAs) often has to sacrifice their ductility. The nitrogen (N)-doping and hetero-structure (HS) design are effective methods to coordinate the strength and ductility. In this study, a 0.79 at% N-doped Fe 40 Mn 40 Co 10 Cr 10 (0.79N) HEA with multi-level grain hetero-structure was constructed, exhibiting excellent strength-ductility balance. By comparing with the coarse-grained (CG) 0N and 0.79N alloys, N-doping promoted the dislocation accumulation in 0.79N-CG alloy, and thus increased its strength mainly due to dislocation strengthening. In addition, the hetero-structure with ultrafine and fine grains significantly increased the strength of 0.79N-HS alloy by significant grain boundary strengthening. Moreover, the hetero-deformation induced (HDI) strengthening and strain hardening contributed to additional strengthening and hardening by accumulating geometrically necessary dislocations at the grain boundaries of large-size grains, resulting in back stress and forward stress during deformation, which was a key factor to increase the strength of 0.79N-HS alloy without sacrificing much ductility. This work provides a significant reference value for the engineering application and development of FCC HEAs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. Multicomponent and high entropy alloys10.3390/e16094749 ↗
2. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
3. Microstructure evolution and mechanical properties of (CoCrNi)90(AlTiZr)5(CuFeMo)5 multicomponent alloy: a pathway through multicomponent alloys toward new superalloys10.1016/j.jallcom.2020.158412 ↗
4. Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range10.1016/j.actamat.2016.11.016 ↗
5. Effect of nitrogen on corrosion behaviour of a novel high nitrogen medium-entropy alloy CrCoNiN manufactured by pressurized metallurgy10.1016/j.jmst.2018.03.021 ↗
6. Why CoCrFeMnNi HEA could not passivate in chloride solution? – A novel strategy to significantly improve corrosion resistance of CoCrFeMnNi HEA by N-alloying10.1016/j.corsci.2022.110396 ↗
7. Design of a twinning-induced plasticity high entropy alloy10.1016/j.actamat.2015.04.014 ↗
8. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
9. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
10. Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys10.1016/j.intermet.2013.10.024 ↗
11. Phase-transformation ductilization of brittle high-entropy alloys via metastability engineering10.1002/adma.201701678 ↗
12. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys10.1016/j.intermet.2011.01.004 ↗
13. Achieving strength–ductility synergy in a non-equiatomic Cr10Co30Fe30Ni30 high-entropy alloy with heterogeneous grain structures10.1007/s12598-022-02019-9 ↗
14. Anomalous work hardening behavior of Fe40Mn40Cr10Co10 high entropy alloy single crystals deformed by twinning and slip10.1016/j.actamat.2019.09.048 ↗
15. Effect of nitrogen on mechanical properties of CoCrFeMnNi high entropy alloy at room and cryogenic temperatures10.1016/j.jallcom.2020.156633 ↗
16. Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0.3CoCrFeNi high entropy alloy10.1016/j.matdes.2017.02.072 ↗
17. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
18. A high-entropy alloy with dislocation-precipitate skeleton for ultrastrength and ductility10.1016/j.actamat.2022.117975 ↗
19. Ultra-strong and strain-hardenable ultrafine-grained medium-entropy alloy via enhanced grain-boundary strengthening10.1080/21663831.2021.1913768 ↗
20. Design of D022 superlattice with superior strengthening effect in high entropy alloys10.1016/j.actamat.2019.01.048 ↗
21. Extremely high dislocation density and deformation pathway of CrMnFeCoNi high entropy alloy at ultralow temperature10.1016/j.scriptamat.2020.07.004 ↗
22. Enhancing the strength and ductility of CoCrFeMnNi high-entropy alloy by nitrogen addition10.1016/j.msea.2020.139587 ↗
23. Effect of thermomechanical processing on microstructure and mechanical properties of the carbon-containing CoCrFeNiMn high entropy alloy10.1016/j.jallcom.2016.09.208 ↗
24. Nano-twin mediated plasticity in carbon-containing FeNiCoCrMn high entropy alloys10.1016/j.jallcom.2015.05.224 ↗
25. Microstructural evolution and mechanical performance of carbon-containing CoCrFeMnNi-C high entropy alloys10.1016/j.jallcom.2018.01.348 ↗
26. The effects of N on the microstructures and tensile properties of Fe–15Mn–0.6C–2Cr–xN twinning-induced plasticity steels10.1016/j.actamat.2013.07.036 ↗
27. Effect of nitrogen on microstructure and mechanical properties of the CoCrFeMnNi high-entropy alloy after cold rolling and subsequent annealing10.1016/j.jallcom.2021.161452 ↗
28. Influences of nitrogen alloying on microstructural evolution and tensile properties of CoCrFeMnNi high-entropy alloy treated by cold-rolling and subsequent annealing10.1016/j.msea.2020.139472 ↗
29. Enhanced strength-ductility synergy via high dislocation density-induced strain hardening in nitrogen interstitial CrMnFeCoNi high-entropy alloy10.1016/j.jmst.2022.09.020 ↗
30. Strengthening mechanisms in high entropy alloys: a review
31. Mechanism of dislocation evolution during plastic deformation of nitrogen-doped CoCrFeMnNi high-entropy alloy10.1016/j.msea.2021.141235 ↗
32. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility10.1073/pnas.1517193112 ↗
33. High tensile ductility in a nanostructured metal10.1038/nature01133 ↗
34. Synergetic strengthening by gradient structure10.1080/21663831.2014.935821 ↗
35. Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging10.1016/j.actamat.2010.10.002 ↗
36. Mechanical properties of copper/bronze laminates: Role of interfaces10.1016/j.actamat.2016.06.023 ↗
37. Design for improving corrosion resistance of duplex stainless steels by wrapping inclusions with niobium armour10.1038/s41467-023-43752-8 ↗
38. Dynamic tensile deformation of Al0.1Ti0.1CoCrFeNi high entropy alloy with heterogeneous grain structure10.1016/j.jallcom.2023.172092 ↗
39. Grain detection from 2d and 3d EBSD data—Specification of the MTEX algorithm10.1016/j.ultramic.2011.08.002 ↗
40. Plastic deformation and fracture of ultrafine-grained Al–Mg alloys with a bimodal grain size distribution10.1016/j.actamat.2005.11.044 ↗
41. Simultaneous enhancement in strength and ductility of Fe50Mn30Co10Cr10 high-entropy alloy via nitrogen alloying10.1016/j.jmst.2020.04.072 ↗
42. Impact of interstitial elements on the stacking fault energy of an equiatomic CoCrNi medium entropy alloy: theory and experiments10.1080/14686996.2022.2080512 ↗
43. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗
44. Heterogeneous materials: a new class of materials with unprecedented mechanical properties10.1080/21663831.2017.1343208 ↗
45. Neutron diffraction in situ monitoring of the dislocation density during martensitic transformation in a stainless steel10.1016/j.scriptamat.2012.11.031 ↗
46. Temperature-dependent universal dislocation structures and transition of plasticity enhancing mechanisms of the Fe40Mn40Co10Cr10 high entropy alloy10.1016/j.ijplas.2021.103148 ↗
47. Enhancement in impact toughness of CoCrFeMnNi
48. M.S. Heshmati, Micro and macro-mechanical behavior of a transformation-induced plasticity steel developed by thermomechanical processing followed by quenching and partitioning10.1016/j.msea.2015.10.116 ↗
49. Mechanism-based strain gradient plasticity— I. Theory10.1016/S0022-5096(98)00103-3 ↗
50. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
51. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
52. The correlation among microstructural parameter and dynamic strain aging (DSA) in influencing the mechanical properties of a reduced activated ferritic-martensitic (RAFM) steel10.1016/j.msea.2018.10.023 ↗
53. Multi-heterostructure and mechanical properties of N-doped FeMnCoCr high entropy alloy10.1016/j.ijplas.2021.102965 ↗
54. Interstitial-driven local chemical order enables ultrastrong face-centered cubic multicomponent alloys10.1016/j.actamat.2022.118495 ↗
55. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
56. Substitutional solution hardening10.1016/0001-6160(63)90213-X ↗
57. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗
58. Deformation mechanisms in single crystal Ni-based concentrated solid solution alloys by nanoindentation10.1016/j.msea.2022.143685 ↗
59. Mechanical properties and deformation behaviours of submicron-sized Cu–Al single crystals10.1016/j.actamat.2021.117460 ↗
60. Shear band-driven precipitate dispersion for ultrastrong ductile medium-entropy alloys10.1038/s41467-021-25031-6 ↗
61. Influence of carbon on the mechanical behavior and microstructure evolution of CoCrFeMnNi processed by high pressure torsion10.1016/j.mtla.2021.101059 ↗
62. Yield strength increase of a CoCrNi medium entropy alloy by interstitial nitrogen doping at maintained ductility10.1016/j.scriptamat.2019.12.007 ↗
63. Atomic scale mechanisms of strengthening of nitrogen steels10.4028/www.scientific.net/MSF.318-320.3 ↗
64. Work hardening mechanism in high nitrogen austenitic steel studied by in situ neutron diffraction and in situ electron backscattering diffraction10.1016/j.msea.2009.07.066 ↗
65. Recovery of strain-hardening rate in Ni-Si alloys10.1038/srep15532 ↗
66. Effects of short-range ordering and stacking fault energy on tensile behavior of nitrogen-containing austenitic stainless steels10.1016/j.msea.2022.142730 ↗
67. A good strength-ductility match in Cu-Mn alloys with high stacking fault energies: determinant effect of short range ordering10.1016/j.scriptamat.2017.02.010 ↗
68. Excellent combination of strength and ductility of CoCrNi medium entropy alloy fabricated by laser aided additive manufacturing
69. Extraordinary strain hardening by gradient structure10.1073/pnas.1324069111 ↗
70. Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals10.1016/0001-6160(83)90007-X ↗
71. A multiscale model for the ductile fracture of crystalline materials10.1016/j.ijplas.2005.04.003 ↗
72. In-situ observation of dislocation dynamics near heterostructured interfaces10.1080/21663831.2019.1616330 ↗
73. On the role of strain gradients and long-range internal stresses in the composite model of crystal plasticity10.1016/S0921-5093(01)01173-X ↗
74. Dynamically reinforced heterogeneous grain structure prolongs ductility in a medium-entropy alloy with gigapascal yield strength10.1073/pnas.1807817115 ↗
75. Back stress strengthening and strain hardening in gradient structure10.1080/21663831.2016.1153004 ↗
76. Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility10.1016/j.actamat.2016.04.045 ↗
77. Heterostructured materials: superior properties from hetero-zone interaction10.1080/21663831.2020.1796836 ↗
78. Ductility by shear band delocalization in the nano-layer of gradient structure10.1080/21663831.2018.1546238 ↗
79. Ductility and plasticity of nanostructured metals: differences and issues10.1016/j.mtnano.2018.09.004 ↗
80. Heterostructured metallic materials: plastic deformation and strain hardening
81. Heterostructured materials10.1016/j.pmatsci.2022.101019 ↗