journal article·2024-10

Imparting a better corrosion resistance and bioactivity for magnesium through the formation of zinc - zinc oxide - zinc phosphate (hopeite) - magnesium ammonium phosphate (struvite) composite coatings

P. Mohan Sathyaraj, T. Balusamy, T.S.N. Sankara Narayanan, K. Ravichandran

Publisher page

Abstract

The present study aims to develop zinc-zinc oxide-zinc phosphate (hopeite)-magnesium ammonium phosphate (struvite) composite coatings to reduce the rate of degradation and to impart a better bioactivity for Mg. Galvanic deposition was employed to form Zn-ZnO coating on Mg, which was subsequently converted to hopeite and struvite by chemical conversion method using diammonium hydrogen phosphate. The structural and morphological characteristics, nature of functional groups, degradation behaviour in Hanks’ balanced salt solution (HBSS) and bioactivity in simulated body fluid (SBF) were evaluated. The findings of the study revealed that Zn-ZnO-hopeite-struvite composite coating has considerably reduced the rate of degradation of Mg in HBSS and promoted the bioactivity of Mg in SBF. The rate of degradation of Mg is decreased from 1.27 ± 0.11 mm/y to 0.13 ± 0.04 mm/y, amounting to ⁓90 % reduction in the corrosion rate. The morphological features reveal that the extent of corrosion attack on Zn-ZnO-hopeite-struvite composite coated Mg is very much limited when compared to that of the uncoated one. The surface of Zn-ZnO-hopeite-struvite composite coated Mg shows many thin needle-like crystals as well as globular-like particles after immersion in SBF when compared to that of uncoated and Zn-ZnO coated Mg. The uniform and compact coating with good adherence, improved corrosion resistance and better bioactivity suggest that Zn-ZnO-hopeite-struvite composite coating is a promising surface modification approach towards the development of Mg-based degradable implants.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Magnesium Oxide Properties and Applications · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Saji · 2022
2. Computational biomechanical and biodegradation integrity assessment of Mg-based biomedical devices for cardiovascular and orthopedic applications: a review
3. T.S.N. Sankara Narayanan, I.S. Park, M.H. LeeSurface modification of magnesium and its alloys for biomedical applications: Opportunities and challenges, Surface Modification of Magnesium and its Alloys for Biomedical Applications Woodhead publishing series in biomaterials-Elsevier , 2 , Volume 1: Biological Interactions, Mechanical Properties and Testing (Chapter) , 2015, , 29–87, 10.1016/C2013-0-16447-1T.S.N. Sankara Narayanan, I.S. Park, M.H. Lee (Eds.)(Chapter).10.1016/B978-1-78242-077-4.00002-4 ↗
4. Magnesium research and applications: Past, present and future: a review10.1016/j.jma.2023.11.007 ↗
5. Corrosion behavior of cold sprayed pure zinc coating on magnesium10.1016/j.surfcoat.2019.06.068 ↗
6. Influence of zinc ion implantation on surface nanomechanical performance and corrosion resistance of biomedical magnesium–calcium alloys10.1016/j.apsusc.2008.02.117 ↗
7. Rapid degradation of biomedical magnesium induced by zinc ion implantation10.1016/j.matlet.2010.11.059 ↗
8. Selected properties of ZnO coating on Mg-based alloy for biomedical application10.12693/APhysPolA.133.222 ↗
9. Antibacterial activity of ZnO films prepared by anodizing10.1007/s40097-016-0194-1 ↗
10. Investigation into the antibacterial behaviour of suspensions of ZnO nanoparticles (ZnO nanofluids)10.1007/s11051-006-9150-1 ↗
11. Antibacterial activity of zinc oxide-coated nanoporous alumina10.1016/j.mseb.2012.04.024 ↗
12. Biomedical applications of zinc oxide nanomaterials10.2174/1566524013666131111130058 ↗
13. Antimicrobial properties of ZnO nanomaterials: a review10.1016/j.ceramint.2016.12.062 ↗
14. Improvement in corrosion resistance of WE43 magnesium alloy by the electrophoretic formation of a ZnO surface coating10.1007/s11998-019-00212-7 ↗
15. Fabrication of an antibacterial zinc oxide film on biodegradable magnesium alloy and its biocompatibility10.1007/s12206-023-0754-5 ↗
16. Corrosion behaviour of facile coated ZnO on Mg–Zn–Zr alloy in Ringer’s physiological solution10.1080/02670844.2023.2210388 ↗
17. Enhanced corrosion resistance and in-vitro biodegradation of plasma electrolytic oxidation coatings prepared on AZ91 Mg alloy using ZnO nanoparticles-incorporated electrolyte10.1016/j.surfcoat.2019.01.002 ↗
18. Cellular proliferation, cellular viability, and biocompatibility of HA-ZnO composites10.1002/jbm.b.31948 ↗
19. Synthesis of a novel nanostructured zinc oxide/baghdadite coating on Mg alloy for biomedical application: in-vitro degradation behavior and antibacterial activities10.1016/j.ceramint.2017.07.233 ↗
20. Fabrication and characterisation of novel ZnO/MWCNT duplex coating deposited on Mg alloy by PVD coupled with dip-coating techniques10.1016/j.jallcom.2017.08.161 ↗
21. Fabrication of ZnO nanotube layer on Zn and evaluation of corrosion behavior and bioactivity in view of biodegradable applications10.1016/j.apsusc.2019.07.165 ↗
22. Zinc phosphate conversion coatings on magnesium alloys: a review10.1007/s12540-013-2023-0 ↗
23. Protecting electrochemical degradation of pure iron using zinc phosphate coating for biodegradable implant applications10.1039/C8NJ02986E ↗
24. Performance of zinc phosphate coatings obtained by cathodic electrochemical treatment in accelerated corrosion tests10.1016/j.electacta.2005.04.020 ↗
25. Formation of zinc–zinc phosphate composite coatings by cathodic electrochemical treatment10.1016/j.surfcoat.2005.04.022 ↗
26. Formation and characteristics of zinc phosphate coatings obtained by electrochemical treatment: cathodic vs. anodic10.1016/j.porgcoat.2008.11.009 ↗
27. Corrosion resistance of phosphate coatings obtained by cathodic electrochemical treatment: role of anode–graphite versus steel10.1016/j.porgcoat.2006.01.009 ↗
28. Deposition of zinc–zinc phosphate composite coatings on steel by cathodic electrochemical treatment10.1007/s11998-013-9533-z ↗
29. Deposition of zinc–zinc phosphate composite coatings on aluminium by cathodic electrochemical treatment10.1016/j.surfcoat.2014.08.040 ↗
30. Controlling the rate of degradation of Mg using magnesium fluoride and magnesium fluoride magnesium phosphate duplex coatings10.1016/j.jma.2021.06.005 ↗
31. Improving the corrosion resistance and bioactivity of magnesium by a carbonate conversion polycaprolactone duplex coating approach10.1039/C9NJ06030H ↗
32. Effects of Zn2+ concentration and pH on the zinc phosphate conversion coatings on AZ31 magnesium alloy10.1016/j.corsci.2013.05.005 ↗
33. Synthesis, characteristics and antimicrobial activity of ZnO nanoparticles10.1016/j.saa.2015.02.041 ↗
34. Polyol-mediated synthesis of zinc oxide nanorods and nanocomposites with poly(methyl methacrylate)
35. The passivating layer influence on Mg-based anode corrosion and implications for electrochemical struvite precipitation10.1149/2.0901912jes ↗
36. Time-dependent corrosion resistance of zinc phosphate coating on AZ31B magnesium alloy in sodium chloride solution10.3139/146.110619 ↗
37. Environmentally-induced cracking of magnesium10.1016/0010-938X(84)90017-9 ↗
38. Electrochemical impedance spectroscopy evaluation of the corrosion behaviour of Mg alloy coated with PECVD organosilicon thin film10.1016/S0300-9440(02)00217-5 ↗
39. Improvement of electrochemical corrosion characteristics of AZ61 magnesium alloy with unconventional fluoride conversion coatings10.1016/j.surfcoat.2018.10.038 ↗
40. Corrosion behavior of 316L stainless steel coatings on ZE41 magnesium alloy in chloride environments10.1016/j.surfcoat.2019.124994 ↗
41. Robust corrosion resistance and self-healing characteristics of a novel Ce/Mn conversion coatings on EV31 magnesium alloys10.1016/j.apsusc.2020.145385 ↗
42. Fabrication of a superhydrophobic Mg-Mn layered double hydroxides coating on pure magnesium and its corrosion resistance10.1016/j.surfcoat.2019.01.009 ↗
43. Electrochemical behavior of anodized Mg alloy AZ91D in chloride containing aqueous solution10.1016/j.corsci.2005.01.010 ↗
44. In-situ monitoring of local corrosion process of scratched epoxy coated carbon steel in simulated pore solution containing varying percentage of chloride ions by localized electrochemical impedance spectroscopy10.1016/j.electacta.2016.02.034 ↗
45. Control of biodegradation of biocompatible magnesium alloys.10.1016/j.corsci.2007.01.001 ↗
46. Corrosion behavior of magnesium (Mg) alloys
47. The effect of NaHCO3 treatment time on the corrosion resistance of commercial magnesium alloys AZ31 and AZ61 in 0.6 M NaCl solution10.1016/j.corsci.2012.10.020 ↗
48. Effect of native oxide film on commercial magnesium alloys substrates and carbonate conversion coating growth and corrosion resistance10.3390/ma7042534 ↗
49. Influence of bicarbonate concentration on the conversion layer formation onto AZ31 magnesium alloy and its electrochemical corrosion behaviour in simulated body fluid10.1039/C6RA08478H ↗
50. Corrosion resistance of one-step superhydrophobic polypropylene coating on magnesium hydroxide-pretreated magnesium alloy AZ31
51. Corrosion of magnesium and its alloys10.1016/j.corsci.2009.04.025 ↗
52. Biodegradable behaviors of AZ31 magnesium alloy in simulated body fluid10.1016/j.msec.2008.08.026 ↗
53. Understanding magnesium corrosion - a framework for improved alloy performance10.1002/adem.200310405 ↗
54. Composite magnesium phosphate coatings for improved corrosion resistance of magnesium AZ31 alloy10.1016/j.corsci.2016.10.010 ↗
55. Corrosion behavior of commercially pure Mg and ZM21 Mg alloy in Ringer's solution - long term evaluation by EIS10.1016/j.corsci.2010.10.011 ↗
56. Electrodeposition of hydroxyapatite coating on magnesium for biomedical applications10.1007/s11998-011-9382-6 ↗
57. Deposition of strontium phosphate coatings on magnesium by hydrothermal treatment: characteristics, corrosion resistance and bioactivity10.1016/j.jallcom.2018.02.200 ↗
58. In vitro degradation of ZnO flowered coated Zn-Mg alloys in simulated physiological conditions10.1016/j.msec.2016.08.071 ↗
59. Corrosion-protective reduced graphene oxide coated cold rolled steel prepared using industrial setup: A study of protocol feasibility for commercial production10.1016/j.surfcoat.2018.05.046 ↗
60. Formation mechanism of calcium phosphate coating on a plasma electrolytic oxidized magnesium and its corrosion behavior in simulated body fluids
61. G.L. Song, A. Atrens, D. St JohnAn Hydrogen Evolution Method for the Estimation of the Corrosion Rate of Magnesium Alloys Springer International Publishing , 9 , Essential Readings in Magnesium Technology (Chapter) , 2016, , 565–572, 10.1002/9781118805497.ch44S.N. Mathaudhu, A.A. Luo, N.R. Neelameggham, E.A. Nyberg, W.H. Sillekens (Eds.)(Chapter).10.1007/978-3-319-48099-2_90 ↗
62. Gallium-containing magnesium alloy for potential use as temporary implants in osteosynthesis10.1016/j.jma.2020.02.009 ↗
63. Clarifying the influence of albumin on the initial stages of magnesium corrosion in Hank’s balanced salt solution10.1016/j.jma.2020.07.002 ↗
64. Corrosion products on biomedical magnesium alloy soaked in simulated body fluids10.1557/jmr.2009.0323 ↗
65. Biodegradable Mg and Mg alloys: Corrosion and biocompatibility10.1016/j.mseb.2011.05.028 ↗
66. Corrosion of high purity Mg, Mg2Zn0.2Mn, ZE41 and AZ91 in Hank’s solution at 37 °C10.1016/j.corsci.2011.06.030 ↗
67. Corrosion mechanism and hydrogen evolution on Mg10.1016/j.cossms.2014.09.005 ↗
68. Corrosion mechanism applicable to biodegradable magnesium implants10.1016/j.mseb.2010.12.017 ↗
69. Review of recent developments in the field of magnesium corrosion10.1002/adem.201400434 ↗
70. Controlled precipitation of nesquehonite (MgCO3·3H2O) by the reaction of MgCl2 with (NH4)2CO310.1016/j.jcrysgro.2008.01.002 ↗
71. In-vitro degradation behaviour of WE54 magnesium alloy in simulated body fluid10.1016/j.matlet.2010.11.051 ↗
72. An investigation of the corrosion mechanisms of WE43 Mg alloy in a modified simulated body fluid solution: the effect of electrolyte renewal10.1016/j.corsci.2014.11.034 ↗