journal article·2024-09Open access

Thermal and compositional fields to maneuver Cu6Sn5 intermetallic growth on (111) nanotwinned copper substrate

Zhijie Zhang, Hong Wei, Xing Gao, Anil Kunwar

Abstract

The microstructure of the Cu 6Sn 5 phase plays a pivotal role in the functionality of microbumps utilized in 3D packaging. In this study, we present an experimental methodology aimed at maneuvering the orientation and morphology of Cu 6Sn 5 grains formed on (111) nanotwinned Cu substrate, achieved through variations in reflow temperatures (260 ∘C and 300 ∘C) and initial Cu proportion in solder (ranging from 0 to 3.0 wt%). At 300 ∘C and lower initial Cu concentrations (0 and 0.7 wt%), irregularly arranged roof-type Cu 6Sn 5 grains exhibiting a pronounced { 2 1 ¯ 1 ¯ 0 } texture were observed. Conversely, typical scallop-type Cu 6Sn 5 grains displaying a specific preferential { 2 1 ¯ 1 ¯ 3 } texture were identified at this temperature for Cu concentrations of 1.5 and 3.0 wt% At 260 ∘ C, the scallop-type morphology was solely present at all Cu composition variants. The differing rates of solute controlled intermetallic phase clustering mechanism at altered solubility limits and magnitudes of thermodynamic driving force for different temperatures, can decide the relative loss of interface coherency and subsequently change the preferred orientation direction of evolving interfacial structures. Our findings demonstrate that the precise control over soldering temperature, solder Cu composition, and the microstructure of Cu UBM can enable the attainment of Cu 6Sn 5 microstructure with a designated orientation and morphology.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. A short review of through-silicon via (tsv) interconnects: metrology and analysis
2. Special issue “building three-dimensional integrated circuits and microsystems
3. A review on the fabrication and reliability of three-dimensional integration technologies for microelectronic packaging: Through-si-via and solder bumping process
4. Challenges and recent prospectives of 3d heterogeneous integration
5. Formation of cu nanotwins on silicon carbide wafers with cr adhesive layer under various substrate bias10.3390/met13101747 ↗
6. Recent advances on kinetic analysis of solder joint reactions in 3d ic packaging technology10.1016/j.mser.2018.09.002 ↗
7. Non-destructive micro analysis of electromigration failures in solder microbumps using 3d x-ray computed tomography10.1016/j.matchar.2022.112404 ↗
8. Cu6sn5 crystal growth mechanisms during solidification of electronic interconnections10.1016/j.actamat.2016.12.043 ↗
9. The effect of crystallographic orientation on the mechanical behavior of cu6sn5 by micropillar compression testing10.1007/s11664-012-2124-4 ↗
10. Epitaxial cu-sn bulk crystals grown by electric current10.1016/j.actamat.2013.06.014 ↗
11. Reliability and failure analysis of sac 105 and sac 1205n lead-free solder alloys during drop test events10.1016/j.microrel.2017.12.013 ↗
12. Research progress on the solder joint reliability of electronics using in deep space exploration10.1186/s10033-023-00834-4 ↗
13. Effect of solder composition on the growth behavior of interfacial compounds on (001) cu and polycrystalline cu during aging10.1016/j.matchar.2022.112380 ↗
14. Dramatic morphological change of scallop-type cu6sn5 formed on (001) single crystal copper in reaction between molten snpb solder and cu10.1063/1.2761840 ↗
15. Morphologies, orientation relationships and evolution of cu6sn5 grains formed between molten sn and cu single crystals10.1016/j.actamat.2008.01.055 ↗
16. Growth characteristics and formation mechanisms of cu6sn5 phase at the liquid-sn0.7cu/(111)cu and liquid-sn0.7cu/(001)cu joint interfaces10.1016/j.actamat.2015.11.034 ↗
17. On the nature of crystal growth from the melt10.1016/0022-0248(67)90003-6 ↗
18. Grain morphology of intermetallic compounds at solder joints10.1557/JMR.2002.0084 ↗
19. Analysis of the isothermal crystallization of casio3 in a cao-al2o3-sio2 melt through in situ observations10.1016/j.jeurceramsoc.2011.03.038 ↗
20. Control of crystal morphology for mold flux during high-aluminum ahss continuous casting process10.1007/s11663-016-0697-7 ↗
21. A data-driven framework to predict the morphology of interfacial cu6sn5 imc in sac/cu system during laser soldering10.1016/j.jmst.2019.12.036 ↗
22. Effect of cosn3 nanocrystals on sn3ag plating for electronic packaging10.1038/s41598-023-48159-5 ↗
23. Comparative study on the bonding property of laser and reflow soldered sn-3.0ag-0.5cu/ni-p microbumps after isothermal aging and multiple reflowing10.1016/j.jmrt.2024.01.273 ↗
24. Nanotwinning: generation, properties, and application10.1016/j.matdes.2020.108752 ↗
25. Nanovoid formation mechanism in nanotwinned cu10.1186/s11671-024-03984-z ↗
26. In situ epitaxial thickening of wafer-scale, highly oriented nanotwinned ag on tailored polycrystalline cu substrates10.1016/j.actamat.2024.119792 ↗
27. Deformation, structural changes and damage evolution in nanotwinned copper under repeated frictional contact sliding10.1016/j.actamat.2011.08.014 ↗
28. Deformation induced columnar grain rotation in nanotwinned metals10.1016/j.msea.2020.140045 ↗
29. Ultrahigh strength and high electrical conductivity in copper10.1126/science.1092905 ↗
30. Observation of atomic diffusion at twin-modified grain boundaries in copper10.1126/science.1160777 ↗
31. Research progress of electroplated nanotwinned copper in microelectronic packaging
32. Nanotwinned copper micro-cone array fabricated by pulse electrodeposition for low-temperature bonding10.1016/j.matlet.2021.129470 ↗
33. Transforming wlp applications: introducing cutting-edge next-generation nanotwinned copper processes to revolutionize hybrid bonding10.4071/001c.115497 ↗
34. Electrodeposition and growth mechanism of preferentially orientated nanotwinned cu on silicon wafer substrate10.1016/j.jmst.2018.01.016 ↗
35. Columnar grain-driven plasticity and cracking in nanotwinned fcc metals10.1016/j.actamat.2021.116925 ↗
36. Microstructure control of unidirectional growth of η-cu6sn5 in microbumps on < 111 > oriented and nanotwinned cu10.1016/j.actamat.2013.04.056 ↗
37. Growth mechanism of interfacial imcs on (111) preferred orientation nanotwinned cu ubm for 3d ic packaging
38. Mechanism on preferred orientation roof-type cu6sn5 grain formation in micro-bump with (111) nanotwinned copper ubm10.1016/j.matchar.2021.111316 ↗
39. Phase field modelling combined with data-driven approach to unravel the orientation influenced growth of interfacial cu6sn5 intermetallics under electric current stressing
40. Competitive growth of cu3sn and cu6sn5 at sn/cu interface during various multi-reflow processes10.1007/s10854-021-06711-x ↗
41. Wettability and rheological behavior of low ag lead-free sac/graphene and cobalt-graphene nanocomposite solder paste10.1007/s11661-022-06707-0 ↗
42. Characterization of a laser-soldered avionic component using lead-free paste10.1016/j.optlastec.2008.05.015 ↗
43. Study on the reliability of novel au-30ga solder for high-temperature packaging10.1016/j.jmrt.2020.11.044 ↗
44. Tuning the microstructure and enhancing the mechanical properties of au-20sn/au/ni(p)/kovar joint by ultrasonic-assisted soldering method10.1016/j.jmrt.2021.06.100 ↗
45. Ultra-thin Cu nano-twinned films sputtered on Si wafers for low temperature hybrid bonding of advanced 3D-IC packages
46. Size effect on interface reaction of sn–xcu/cu solder joints during multiple reflows10.1007/s10854-019-00758-7 ↗
47. Kinetics of the η-η’ transformation in cu6sn510.1016/j.scriptamat.2011.07.058 ↗
48. The influence of ni additions on the relative stability of η and η’ cu6sn510.1063/1.3310019 ↗
49. Relationship between morphologies and orientations of cu6sn5 grains in sn3.0ag0.5cu solder joints on different cu pads10.1016/j.matchar.2013.12.006 ↗
50. Mechanism on the nucleation of orientation-preferred cu6sn5 at different temperatures and solder compositions10.1016/j.jallcom.2021.163157 ↗
51. Stabilisation of cu6sn5 by ni in sn-0.7cu-0.05ni lead-free solder alloys10.1016/j.intermet.2009.07.005 ↗
52. Diffusion parameters and growth mechanism of phases in the cu-sn system10.1007/s11661-010-0592-9 ↗
53. Kinetics of the η-η′ transformation in cu6sn510.1016/j.scriptamat.2011.07.058 ↗
54. Size effect model on kinetics of interfacial reaction between sn-xag-ycu solders and cu substrate10.1038/srep07117 ↗
55. Study of the liquid structure of sn-cu solders
56. Effect of ag3sn nanoparticles and temperature on cu6sn5 imc growth in sn-xag/cu solder joints10.1016/j.materresbull.2017.11.022 ↗
57. Thermodynamic assessment of sn-cu-ce system10.1016/j.calphad.2013.04.003 ↗
58. Thermodynamic description of the cu-pb-sn system at the cu-pb side10.1016/j.calphad.2010.07.008 ↗
59. Experimental investigation and thermodynamic assessment of the cu-sn-ti ternary system10.1016/j.calphad.2010.12.006 ↗
60. Thermodynamic description of the cu–sn system10.1557/JMR.2007.0396 ↗
61. pycalphad: Calphad-based computational thermodynamics in python10.5334/jors.140 ↗
62. A quantitative and thermodynamically consistent phase-field interpolation function for multi-phase systems10.1016/j.actamat.2010.10.038 ↗
63. Moose: a parallel computational framework for coupled systems of nonlinear equations10.1016/j.nucengdes.2009.05.021 ↗
64. Theory for intermetallic phase growth between cu and liquid sn-pb solder based on grain boundary diffusion control10.1007/s11664-998-0066-7 ↗