journal article·2024-08

Enhancing the adiabatic shear resistance of Ti-Zr-Nb-Al high entropy alloy via metastability engineering

Xudong Liu, Dong Xu, Mengyunqing Han, Yao Xiao, Liang Wang, Benpeng Wang, Ke Jin, Lu Wang, Yunfei Xue

Publisher page

Abstract

Dual-phase Ti-Zr based high entropy alloys are lightweight structural materials with high specific strength, which are promising for the application in warheads and munitions. However, they usually experience adiabatic shear under impact, resulting in early failure. Here, we demonstrate an effective method to enhance the adiabatic shear resistance, benefiting from the transformation-induced plasticity (TRIP) effect. The composition of Ti-Zr-Nb-Al is designed based on a combination of lattice distortion enthalpy, mixing enthalpy, and Bo ¯ - Md ¯ criteria, to enable a metastable solution structure. The alloy is directly water quenched from 900 ℃ to maximally keep the metastable BCC phase (MA), while an annealed alloy with the BCC+HCP dual-phase structure (PA) is also fabricated for comparison. The metastable MA alloy exhibits a doubled fracture strain and 79 % enhancement of impact energy compared with the dual-phase PA alloy, while its dynamic ultimate strength remains almost unchanged. Microstructural analyses at different dynamic stain levels reveal a BCC-α" phase transformation in MA alloy, which delays the generation of phase boundaries, avoids the premature stress concentration, and thereby delays the occurrence of adiabatic shear.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. A review on the dynamic-mechanical behaviors of high-entropy alloys10.1016/j.pmatsci.2023.101090 ↗
2. Analytical characterization of shear localization in thermoviscoplastic materials10.1115/1.3173121 ↗
3. Finite element modeling of the formation of adiabatic shear bands in AISI 4340 steel10.1016/S0921-5093(99)00026-X ↗
4. Self-organization in the initiation of adiabatic shear bands10.1016/S1359-6454(97)00151-1 ↗
5. Approximate analysis for the formation of adiabatic shear bands10.1016/0022-5096(90)90012-S ↗
6. Stress collapse in adiabatic shear bands10.1016/0022-5096(87)90051-2 ↗
7. On the measurement of local strain and temperature during the formation of adiabatic shear bands10.1016/0921-5093(92)90026-W ↗
8. A failure criterion based on material instability10.1016/S0020-7683(03)00059-3 ↗
9. Influence of specimen geometry on adiabatic shear instability of tungsten heavy alloys10.1016/S0734-743X(02)00022-2 ↗
10. The effect of strain rate on mechanical properties and microstructure of a metastable FeMnCoCr high entropy alloy10.1016/j.msea.2020.138982 ↗
11. Impact response of metastable dual-phase high-entropy alloy Cr10Mn30Fe50Co1010.1016/j.jallcom.2023.171341 ↗
12. Role of strain rate in phase stability and deformation mechanism of non-equiatomic Fe38-xMn30Co15Cr15Ni2Gdx high-entropy alloy10.1016/j.matchar.2022.112356 ↗
13. Effects of deformation-induced martensitic transformation on quasi-static and dynamic compressive properties of metastable SiVCrMnFeCo high-entropy alloys10.1016/j.jallcom.2022.167543 ↗
14. Phase-transformation ductilization of brittle high-entropy alloys via metastability engineering10.1002/adma.201701678 ↗
15. Strain rate sensitive microstructural evolution in a TRIP assisted high entropy alloy: experiments, microstructure and modeling10.1016/j.mechmat.2021.103798 ↗
16. Effects of deformation-induced martensitic transformation on quasi-static and dynamic compressive properties of metastable SiVCrMnFeCo high-entropy alloys
17. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
18. Calculations of mixing enthalpy and mismatch entropy for ternary amorphous alloys10.2320/matertrans1989.41.1372 ↗
19. Method to identify the phase structures of high entropy alloys with modified lattice distortion enthalpy
20. Phase transformations in body-centered cubic Nb x HfZrTi high-entropy alloys10.1016/j.matchar.2018.06.012 ↗
21. Design and tensile properties of a bcc Ti-rich high-entropy alloy with transformation-induced plasticity
22. A novel stress-induced martensitic transformation in a single-phase refractory high-entropy alloy10.1016/j.scriptamat.2020.08.013 ↗
23. Mechanical property and cellular structure of an additive manufactured FeCoNiCrMo0.2 high-entropy alloy at high-velocity deformation10.1016/j.jmst.2022.08.013 ↗
24. Dynamic mechanical properties and ignition behavior of TiZrHfX0.5 high-entropy alloys associated with temperature, trace element and strain rate10.1016/j.jallcom.2022.167798 ↗
25. Microstructure, mechanical properties and energetic characteristics of a novel high-entropy alloy HfZrTiTa0.5310.1016/j.matdes.2017.08.022 ↗
26. Microstructural evolution and energetic characteristics of TiZrHfTa0.7W0.3 high-entropy alloy under high strain rates and its application in high-velocity penetration10.1016/j.jmst.2022.05.043 ↗
27. High susceptibility to adiabatic shear banding and high dynamic strength in tungsten heavy alloys with a high-entropy alloy matrix10.1016/j.jallcom.2020.157796 ↗
28. The microstructure and mechanical properties of refractory high-entropy alloys with high plasticity10.3390/ma11020208 ↗
29. Mechanical behavior and microstructure of Ti20Hf20Zr20Ta20Nb20 high-entropy alloy loaded under quasi-static and dynamic compression conditions10.1016/j.matchar.2015.11.018 ↗