Fluorene-carbazole-based hyperbranched polymers with linear red TADF chromophores for high-efficiency white and red electroluminescent devices
Source abstract
Abstract
Solution-processed polymer light emitting devices (PLEDs) using high-quality thermally activated delayed fluorescence (TADF) polymers as the emitting layers are attractive, however, high-efficiency white-light TADF polymers are very rare because of the complicated radiative transition channels. In this study, a series of hyperbranched TADF conjugated polymers were designed and synthesized which adopted the linear D-A-type TADF emitter of 1,8-naphthalimide-acridine as red chromophores, conjugated poly(fluorene-carbazole) as the blue backbone and triphenylamine as the hyperbranched cores. By adjusting the appropriate feed ratios of monomers, energy transfer process from the blue backbone to the red chromophores could be regulated and HR0.8 film had the highest photoluminescent quantum yield of 24 %. Consequently, its doped electroluminescent device showed the cold-white emission with the CIE color coordinates of (0.35, 0.23) and the maximum EQE of 6.82 %. By simply raising the concentration of the red chromophore in the polymers, the rapid reverse intersystem crossing (RISC) process and the enlarged energy gap between S 1 and T 1 were achievable.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Conducting polymers and applications · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Solution-processable thermally activated delayed fluorescence white OLEDs based on dual-emission polymers with tunable emission colors and aggregation-enhanced emission properties
2. Flexible ink-jet printed polymer light-emitting diodes using a self-hosted non-conjugated TADF polymer10.1002/marc.202370030 ↗
3. Recent advances in conjugated TADF polymer featuring in backbone-donor/pendant-acceptor structure: material and device perspectives10.1002/tcr.201800152 ↗
4. High-efficiency TADF polymers with a spatially confined conjugated backbone enable solution-processable blue OLEDs realizing over 20% EQE
5. Narrowband emissive TADF conjugated polymers towards highly efficient solution-processible OLEDs
6. Solution-processable thermally activated delayed fluorescence red emitters poly(carbazole-fluorene) containing naphthalene imide units10.1016/j.polymer.2023.126316 ↗
7. Modulating backbone conjugation of polymeric thermally activated delayed fluorescence emitters for high-efficiency blue OLEDs10.1002/adfm.202305324 ↗
8. Turning the energy channel of side-chain TADF polymers by monomer optimization for high-efficiency solution-processed white OLEDs10.1016/j.jlumin.2023.119966 ↗
9. Sterically-locked donor–acceptor conjugated polymers showing efficient thermally activated delayed fluorescence10.1002/anie.202016428 ↗
10. Prediction of new stable structure, promising electronic and thermodynamic properties of MoS3: Ab initio calculations10.1016/j.jpowsour.2016.06.044 ↗
11. Activating energy transfer tunnels by tuning local electronegativity of conjugated polymeric backbone for high-efficiency OLEDs with low efficiency roll-off
12. Bright white electroluminescence from a single polymer containing a thermally activated delayed fluorescence unit and a solution-processed orange OLED approaching 20% external quantum efficiency10.1039/C7TC03769D ↗
13. Prediction of new stable structure, promising electronic and thermodynamic properties of MoS3: Ab initio calculations10.1016/j.jpowsour.2016.06.044 ↗
14. Influence of steric configurations in the conjugated polymers using acridine-triazine derivates as green chromophores10.1016/j.synthmet.2023.117531 ↗
15. Hyperbranched polyborosiloxanes: non-traditional luminescent polymers with red delayed fluorescence10.1002/anie.202312571 ↗
16. Hyperbranched conjugated polymer with multiple charge transfer enables high-efficiency nondoped red electroluminescence with low driving voltage10.1021/acsami.2c21533 ↗
17. Teaching an old acceptor new tricks: rationally employing 2,1,3-benzothiadiazole as input to design a highly efficient red thermally activated delayed fluorescence emitter10.1039/C7TC00025A ↗
18. Achieving nearly 30% external quantum efficiency for orange–red organic light emitting diodes by employing thermally activated delayed fluorescence emitters composed of 1,8-naphthalimide-acridine hybrids
19. Red-emitting thermally activated delayed fluorescence polymers with poly(fluorene-co-3,3′-dimethyl diphenyl ether) as the backbone10.1021/acs.macromol.8b02050 ↗
20. TADF dendronized polymer with vibrationally enhanced direct spin-flip between charge-transfer states for efficient non-doped solution-processed OLEDs10.1016/j.cej.2022.134924 ↗
21. Two-photon absorption properties of hyperbranched conjugated polymers with triphenylamine as the core10.1016/j.polymer.2004.08.053 ↗
22. Crosslinkable triphenylamine-based hole-transporting polymers for solution-processed polymer light-emitting diode10.1016/j.orgel.2017.10.038 ↗
23. Vibrational spectroscopic, NBO, AIM, and multiwfn study of tectorigenin: a DFT approach10.1016/j.molstruc.2020.128443 ↗
24. Nature of the lowest singlet and triplet excited states of organic thermally activated delayed fluorescence emitters: a self-consistent quantum mechanics/embedded charge study10.1021/acs.chemmater.9b00824 ↗
25. Influence of oxygen vacancies on the electronic and optical properties of zirconium dioxide from first-principles calculations10.1007/s11664-019-07325-0 ↗
26. Thioxanthone-containing blue thermally activated delayed fluorescent emitter10.35848/1882-0786/acb3ad ↗
27. Achieving a stable dual-emission emitter with the asymmetric D-A-D’ structure10.1016/j.dyepig.2023.111393 ↗
28. Investigating the influence of the solution-processing method on the morphological properties of organic semiconductor films and their impact on OLED performance and lifetime10.1016/j.orgel.2019.105509 ↗
29. Influence of vacancies on the optical and electronic properties of the rhombohedral In2O3 oxide10.1111/jace.19511 ↗
30. Ge-vacancy improved the optical and electronic properties of GeAs2 semiconductor10.1016/j.ceramint.2019.06.078 ↗
31. The effect of polymer molecular weight and solvent type on the planarization of spin-coated films10.1149/1.2044307 ↗
32. Prediction of oscillator strength and transition dipole moments with the nuclear ensemble approach for thermally activated delayed fluorescence emitters10.1021/acs.jpcc.9b02376 ↗
33. Elucidating the horizontal orientation mechanism of emissive transition dipole moment in a series of stick-like delayed fluorescent emitters for ultra-high-efficiency OLEDs