Role of microstructure in the exploitation of self-healing potential in form-stable composite phase change materials based on immiscible alloys
Source abstract
Abstract
Metallic Phase Change Materials (PCMs), based on solid-liquid transitions, represents one of the most promising technologies for efficient Thermal Energy Storage (TES), due to their superior thermal conductivity and energy storability per unit volume, but suffer of limited solutions for their handling at the molten state. The use of Miscibility Gap Alloys (MGAs) allows to manage PCM volume expansion and keep it confined when molten, preventing interaction with the environment. A relevant example is provided by the Al-Sn system, where Al covers the role of the high-temperature stable and highly thermal-conductive passive matrix and Sn the active PCM. The alloy can thus be considered a Composite PCM (C-PCM). The response fastness of these systems depends on their thermal diffusivity, subjected to abrupt variations under the presence of discontinuities and damages. In this sense, the authors investigated the possibility to employ molten Sn mobility in a potentially damaged C-PCM for self-healing purposes, aimed to restore, at least partially, the material continuity and thus its thermal diffusivity. Exudation heat treatments above the melting temperature of Sn were performed on sets of Al-40%wt. Sn metallic composites, produced either with powder metallurgy or liquid metal routes, in order to quantify and assess the mobility of the Sn under simulated operating conditions. Exudation tests assess Simple Mixed powders and liquid metal routes sample as the ones with the highest healing potential. Al dissolution and re-deposition was established by EDS analyses as one of the principal Sn mobility mechanisms. Laser Flash Analysis tests, as well as microstructural investigations, were performed on the samples before and after both healing-focused and simulated service heat treatments to evaluate the changes of thermal diffusivity. Healing-focused treatment at 250°C for 1 hour generally displayed a moderate thermal diffusivity recovery and simulated service by shorter cycles between 170°C and 270°C slightly reduce it. The beneficial role of healing focused heat treatments at 250°C for 1 hour suggests that the presence of fully molten Sn phase during service for relatively long time could be beneficial for functional healing. The requirements of suitable Al-Sn microstructures for self-healing purposes, granting at the same time the C-PCM functionalities, i.e., thermal energy storage and form-stability, were set.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. Review on heat transfer analysis in thermal energy storage using latent heat storage systems and phase change materials10.1002/er.4196 ↗
2. Thermophysical heat storage for cooling, heating, and power generation: a review10.1016/j.applthermaleng.2019.114728 ↗
3. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗
4. Phase change materials for thermal energy storage10.1016/j.pmatsci.2014.03.005 ↗
5. Review of metallic phase change materials for high heat flux transient thermal management applications10.1016/j.apenergy.2019.113955 ↗
6. Thermal capacitors made from miscibility gap alloys (MGAs)10.2495/ESUS140411 ↗
7. A review of metallic materials for latent heat thermal energy storage: thermophysical properties, applications, and challenges10.1016/j.rser.2021.111812 ↗
8. Medium- and high-temperature latent and thermochemical heat storage using metals and metallic compounds as heat storage media: a technical review10.1016/j.apenergy.2020.115950 ↗
9. Review of metallic phase change materials for high heat flux transient thermal management applications10.1016/j.apenergy.2019.113955 ↗
10. J. Nieto-Maestre, I. Iparraguirre-Torres, Z.A. Velasco, I. Kaltzakorta, M.M. Zubieta, Novel metallic alloys as phase change materials for heat storage in direct steam generation applications, AIP Conf. Proc., 1734, 2016, https://doi.org/10.1063/1.4949130.10.1063/1.4949130 ↗
11. Considerations for the use of metal alloys as phase change materials for high temperature applications10.1016/j.solmat.2017.06.054 ↗
12. High-temperature latent thermal storage system for solar power: materials, concepts, and challenges
13. Performance improvement of solar thermal systems integrated with phase change materials ( PCM), a review10.1016/j.solener.2020.05.106 ↗
14. Effect of inhomogeneous composition on the thermal conductivity of an Al alloy during the precipitation-hardening process10.1016/j.jmrt.2020.07.040 ↗
15. Macro-encapsulation of metallic phase change material using cylindrical-type ceramic containers for high-temperature thermal energy storage10.1016/j.apenergy.2016.02.106 ↗
16. Micro- And nano-encapsulated metal and alloy-based phase-change materials for thermal energy storage10.1039/D0NA01008A ↗
17. Compatibility of an Aluminium-Silicon metal alloy-based phase change material with coated stainless-steel containers10.1016/j.est.2020.101961 ↗
18. Suitability of aluminium copper silicon eutectic as a phase change material for thermal storage applications: thermophysical properties and compatibility10.1002/est2.299 ↗
19. Miscibility gap alloys with inverse microstructures and high thermal conductivity for high energy density thermal storage applications10.1016/j.applthermaleng.2012.11.029 ↗
20. Current trends in the field of self-healing materials10.1002/macp.201100442 ↗
21. Evolution of self-healing elastomers, from extrinsic to combined intrinsic mechanisms: a review10.1039/D0MH00535E ↗
22. A comprehensive review of self-healing polymer, metal, and ceramic matrix composites and their modeling aspects for aerospace applications10.3390/ma15238521 ↗
23. Thermally-triggered dual in-situ self-healing metallic materials
24. Self-healing high strength and thermal conductivity of 3D graphene/PDMS composites by the optimization of multiple molecular interactions10.1021/acs.macromol.9b02544 ↗
25. High thermal conductivity of self-healing polydimethylsiloxane elastomer composites by the orientation of boron nitride nano sheets10.1002/pat.5467 ↗
26. Thermally conductive glass fiber reinforced epoxy composites with intrinsic self-healing capability10.1007/s42114-021-00303-3 ↗
27. Highly thermally conductive polymer/graphene composites with rapid room-temperature self-healing capacity10.1007/s40820-022-00882-w ↗
28. A fast and room-temperature self-healing thermal conductive polymer composite10.1007/s10118-021-2620-1 ↗
29. Ultra-soft thermal self-healing liquid-metal-foamed composite with high thermal conductivity10.1016/j.compscitech.2022.109523 ↗
30. Review of recent achievements in self-healing conductive materials and their applications10.1007/s10853-017-1388-8 ↗
31. Ultrauniform embedded liquid metal in sulfur polymers for recyclable, conductive, and self-healable materials10.1002/adfm.201808989 ↗
32. Self-healing metals and metal matrix composites10.1007/s11837-014-0912-4 ↗
33. Autonomic restoration of electrical conductivity10.1002/adma.201102888 ↗
34. The Al-Sn (aluminum-tin) system10.1007/BF02868095 ↗
35. Thermo-calc, Thermo-Calc Documentation Set Thermo-Calc Version 2023a, (n.d.). 〈https://thermocalc.com/support/documentation/〉 (Accessed 21 January 2023).
36. Modelling of phase diagrams and thermodynamic properties using Calphad method - development of thermodynamic databases10.1016/j.commatsci.2012.02.003 ↗
37. Microstructure and properties of thermally sprayed Al-Sn-based alloys for plain bearing applications
38. Promoting the high load-carrying capability of Al–20wt%Sn bearing alloys through creating nanocomposite structure by mechanical alloying
39. Effects of rapid solidification on the microstructure and surface analyses of laser-deposited Al-Sn coatings on AISI 1015 steel10.1007/s00170-017-0876-y ↗
40. Metallurgical problems associated with the production of aluminium-tin alloys10.1016/S0261-3069(97)00078-2 ↗
41. Improvement of surface properties of an Al–Sn–Cu plain bearing alloy produced by rapid solidification10.1016/j.jallcom.2019.07.082 ↗
42. Effect of Si and Cu additions on the phase composition, microstructure and properties of Al-Sn alloys10.1016/j.jallcom.2016.11.193 ↗
43. Ball-milled Al–Sn alloy as composite Phase Change Material
44. Combined powder metallurgy routes to improve thermal and mechanical response of Al−Sn composite phase change materials10.1016/S1003-6326(20)65456-5 ↗
45. Miscibility gap alloys with inverse microstructures and high thermal conductivity for high energy density thermal storage applications10.1016/j.applthermaleng.2012.11.029 ↗
46. Al-Sn miscibility gap alloy produced by power bed laser melting for application as phase change material10.1016/j.jallcom.2021.160596 ↗
47. Effect of process parameters on laser powder bed fusion of Al-Sn miscibility gap alloy10.3390/qubs6020017 ↗
48. Microstructural features and thermal response of granulated Al and A356 alloy with relevant Sn additions10.1016/j.matdes.2023.111879 ↗
49. Synchrotron radiation micro-CT with phase contrast for high-temperature in-situ microstructural characterization of Al[sbnd]Sn composite phase change materials10.1016/j.matchar.2022.112302 ↗
50. In situ investigation of the healing process in dual-microcapsule self-healing materials by the synchrotron radiation computed tomography10.1016/j.compositesa.2022.106955 ↗
51. A review of self ‑ healing metals: fundamentals, design principles and performance10.1007/s40195-020-01102-3 ↗
52. C.S.O, P.S. Nnamchi, Exploits, Advances and Challenges in Characterizing Self-Healing Materials, Intech. i, 2016, p. 13.
53. Recent advancements in self-healing metallic materials and self-healing metal matrix composites10.1007/s11837-018-2835-y ↗
54. Wetting transition on grain boundaries in Al contacting with a Sn-rich melt10.1007/BF00207014 ↗
55. Reactive wetting of tin/steel and tin/aluminum at 350–450 °C10.1016/j.jallcom.2017.05.036 ↗
56. Effective conductivity of Cu-Fe and Sn-Al miscibility gap alloys10.1016/j.ijheatmasstransfer.2014.05.024 ↗
57. Microstructural efficiency: structured morphologies10.1016/j.ijheatmasstransfer.2014.11.012 ↗
58. Metallic composites as form-stable phase-change alloys10.4028/www.scientific.net/MSF.941.1966 ↗
59. Microstructural and thermal response evolution of metallic form-stable phase change materials produced from ball-milled powders10.1007/s10973-020-09785-7 ↗
60. Combined powder metallurgy routes to improve thermal and mechanical response of Al−Sn composite phase change materials10.1016/S1003-6326(20)65456-5 ↗
61. T. Ferreira, W. Rasband, ImageJ User Guide User Guide ImageJ, Image J User Guid. 1.46r, 2012, 10.1038/nmeth.2019.
62. ThermoCalc ThermoCalc, T.C.S.Al-based Alloy Database (TCAL8), 2021, pp. 1–61.
63. The accuracy of laser flash analysis explored by finite element method and numerical fitting
64. The influence of the atmosphere on the sintering of aluminum10.1007/s11661-002-0314-z ↗
65. Autonomic healing of polymer composites10.1038/35057232 ↗
66. Penetration of liquid tin along grain boundaries and triple grain-boundary junctions of aluminum10.3103/S1067821207020101 ↗
67. Liquid-metal- and solid-metal-induced embrittlement10.31399/asm.hb.v11.a0006786 ↗
68. A review of recent advances in the understanding of liquid metal embrittlement10.5006/2904 ↗
69. A short review of high-temperature wetting and complexion transitions with a critical assessment of their influence on liquid metal embrittlement and corrosion10.5006/1925 ↗
70. Spheroidizing in steels: processes, mechanisms, kinetic and microstructure-a review
71. Mechanisms of pearlite spheroidization10.1007/BF02646654 ↗
72. Phase field study of interfacial diffusion-driven spheroidization in a composite comprised of two mutually insoluble phases10.1063/1.4869296 ↗
73. Synchrotron radiation micro-CT with phase contrast for high-temperature in-situ microstructural characterization of Al[sbnd]Sn composite phase change materials10.1016/j.matchar.2022.112302 ↗
74. S. Sharafat, N. Ghoniem, Summary of Thermo-Physical Properties of Sn, Comparison of Properties of Sn, Sn-Li, Li, and Pb-Li, (n.d.), pp. 1–51.
75. Thermal expansion of tetragonal tin10.1107/S0365110X61001212 ↗
76. Thermal conductivity: IX, experimental investigation of effect of porosity on thermal conductivity10.1111/j.1551-2916.1954.tb20108.x ↗
77. Thermal conductivity of porous materials10.1557/jmr.2013.179 ↗
78. The thermal expansion of pure metals: copper, gold, aluminum, nickel and iron10.1103/PhysRev.60.597 ↗
79. Defects in metal additive manufacturing processes10.1007/s11665-021-05919-6 ↗
80. On the role of stress, strain and diffusion in dissolution – condensation mechanism of liquid metal embrittlement10.4028/www.scientific.net/DDF.264.141 ↗
81. Effect of mechanical alloying on thermal conductivity of Bi2Te3-Sb2Te310.2320/matertrans.M2016169 ↗