The effect of HCl on achieving pure Li3InCl6 by water-mediated synthesis process
Source abstract
Abstract
Lithium indium chloride ‘Li 3InCl 6 (LIC)’ has been demonstrated to be a good electrolyte for solid-state lithium batteries. However, in the water-mediated synthesis process, the LIC precursor was inevitably subjected to slight oxidation during drying because of that the LIC is extremely easy bonded with water. In this study, a dilute hydrochloric acid (HCl) was introduced in the water-mediated synthesis process. The results showed that a pure LIC sample was obtained successfully in the case of 5 wt% HCl, and an optimum Li + ionic conductivity of 1.94 mS∙cm −1 was achieved. The assembled all-solid-state lithium-ion battery LIC@LiCoO 2/LIC/Li 6PS 5Cl/In-Li had a high charge specific capacity of 163.2 mAh·g −1 at 0.05 C. The Coulombic efficiency remained above 98% after 20 cycles. Further analysis indicated that the hydrates of HCl(H 2O) 2 and HCl(H 2O) 3 were observed in the sample after drying at 100 ℃ for 4 h, and they were disappeared after drying at 200 ℃ for 4 h. Therefore, it suggested that HCl was better at absorbing free water molecules than LIC, as a result it prevented LIC from being oxidized during drying process. In contrast, samples without HCl showed In(OH) 3 impurities after drying at 143 ℃ for 4 h, which led to the appearance of final oxide impurities in LIC.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Inorganic Chemistry and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Promise and reality of post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
2. Nonaqueous liquid electrolytes for lithium-based rechargeable batteries10.1021/cr030203g ↗
3. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
4. New cost-effective halide solid electrolytes for all-solid-state batteries: mechanochemically prepared Fe3+-substituted Li2ZrCl6
5. Approaching practically accessible solid-state batteries: stability issues related to solid electrolytes and interfaces10.1021/acs.chemrev.9b00268 ↗
6. Unconventional solid-state electrolytes for lithium-based batteries: recent advances and challenges10.1016/j.jpowsour.2022.232257 ↗
7. A lithium superionic conductor10.1038/nmat3066 ↗
8. Li10SnP2S12: an affordable lithium superionic conductor10.1021/ja407393y ↗
9. Fast lithium ion conduction in garnet-type Li7La3Zr2O1210.1002/anie.200701144 ↗
10. Interface-engineered all-solid-state Li-ion batteries based on garnet-type fast Li+ conductors10.1002/aenm.201600736 ↗
11. Design strategies, practical considerations, and new solution processes of sulfide solid electrolytes for all-solid-state batteries10.1002/aenm.201800035 ↗
12. Materials design principles for air-stable lithium/sodium solid electrolytes10.1002/anie.202007621 ↗
13. Li+ conduction in air-stable Sb-Substituted Li4SnS4 for all-solid-state Li-Ion batteries10.1016/j.jpowsour.2019.227338 ↗
14. Coatable Li4SnS4 solid electrolytes prepared from aqueous solutions for all-solid-state lithium-ion batteries10.1002/cssc.201700409 ↗
15. Tailoring the cation lattice for chloride lithium-ion conductors10.1002/aenm.202002356 ↗
16. K.-H. Park, K. Kaup, A. Assoud, Q. Zhang, X. Wu, L.F. Nazar, High Voltage Superionic Halide Solid Electrolytes for All-Solid-State Li- Ion Batteries, (n.d.) 12.
17. Solid halide electrolytes with high lithium-ion conductivity for application in 4 V class bulk-type all-solid-state batteries10.1002/adma.201803075 ↗
18. Water-mediated synthesis of a superionic halide solid electrolyte10.1002/anie.201909805 ↗
19. Phase evolution during lithium–indium halide superionic conductor dehydration
20. Reducing oxy-contaminations for enhanced Li-ion conductivity of halide-based solid electrolyte in water-mediated synthesis10.1007/s10008-022-05213-y ↗
21. Unraveling the origin of moisture stability of halide solid-state electrolytes by In Situ and Operando Synchrotron X-ray analytical techniques10.1021/acs.chemmater.0c02419 ↗
22. NMR and FTIR studies of clustering of water molecules: from low-temperature matrices to nano-structured materials used in innovative medicine10.1016/j.molliq.2016.11.076 ↗
23. Practical application of the Kramers-Kronig transformation on impedance measurements in solid state electrochemistry10.1016/0167-2738(93)90261-Z ↗
24. Air sensitivity and degradation evolution of halide solid state electrolytes upon exposure