journal article·2024-05

Investigating acoustic emission during macro-indentation of AZ 31 magnesium alloy

Gonzalo Seisdedos, R. Sarvesha, Milo Prisbrey, Tyler Dolmetsch, Arvind Agarwal

Publisher page

Abstract

Accelerated mechanical characterization is crucial for enabling the rapid assessment of mechanical properties during process optimization or material development. This article introduces an innovative approach, combining profilometer-based indentation plastometry (PIP) with a real-time acoustic emission (AE) monitoring system. This approach assists in comprehensively assessing both mechanical properties and the underlying deformation mechanisms during indentation through AE emission. In this study, we investigate the effect of grain size variation on acoustic emission in AZ31 magnesium alloy during PIP indentation. Our findings demonstrate that PIP-inferred yield strength is notably higher (68 MPa) for samples with smaller grain sizes (70 µm) compared to those with large grain sizes (98 µm), with a yield strength of 46 MPa. Moreover, AE-energies are notably lower in samples with smaller grain sizes as opposed to those with larger grain sizes. To further gain insight into the dominant deformation mechanism, a non-supervised cluster analysis, in conjunction with electron backscattered diffraction (EBSD) analysis, reveals that the major deformation systems are basal dislocation glide 0001 11 2 ̅ 0 and extension twinning 10 1 ̅ 2 10 1 ̅ 1 .
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. Rapid alloy prototyping: compositional and thermo-mechanical high throughput bulk combinatorial design of structural materials based on the example of 30Mn–1.2C–xAl triplex steels10.1016/j.actamat.2012.05.017 ↗
2. Discovery of new materials using combinatorial synthesis and high-throughput characterization of thin-film materials libraries combined with computational methods10.1038/s41524-019-0205-0 ↗
3. Multi-objective accelerated process optimization of mechanical properties in laser-based additive manufacturing: case study on Selective Laser Melting (SLM) Ti-6Al-4V10.1016/j.jmapro.2018.12.040 ↗
4. Depth-sensing nanoindentation measurement techniques and applications10.1007/s00542-017-3372-2 ↗
5. T.W. Clyne, J.E. Campbell, 2021. Testing of the Plastic Deformation of Metals, Cambridge University Press, 2021.10.1017/9781108943369 ↗
6. Comparison between stress-strain plots obtained from indentation plastometry, based on residual indent profiles, and from uniaxial testing10.1016/j.actamat.2019.02.006 ↗
7. A critical appraisal of the instrumented indentation technique and profilometry-based inverse finite element method indentation plastometry for obtaining stress–strain curves10.1002/adem.202001496 ↗
8. Profilometry-based indentation plastometry to obtain stress-strain curves from anisotropic superalloy components made by additive manufacturing10.1016/j.mtla.2021.101017 ↗
9. Tensile-compressive asymmetry in extruded AZ31B rod and its effect on Profilometry-based Indentation Plastometry (PIP)10.1016/j.msea.2022.143429 ↗
10. Profilometry-based indentation plastometry for evaluating bulk tensile properties of aluminum-silicon carbide composites10.1002/adem.202201890 ↗
11. Indentation plastometry of particulate metal matrix composites, highlighting effects of microstructural scale10.1002/adem.202201479 ↗
12. Macroscale property assessment and indentation characteristics of thick section friction stir welded AA 508310.1016/j.msea.2023.145306 ↗
13. Indentation plastometry of welds10.1002/adem.202101645 ↗
14. Orientation dependent deformation by slip and twinning in magnesium during single crystal indentation10.1016/j.actamat.2015.01.046 ↗
15. Anisotropic deformation induced by spherical indentation of pure Mg single crystals10.1016/j.actamat.2014.06.039 ↗
16. Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications10.1016/j.actamat.2012.10.044 ↗
17. The effect of grain size on the deformation behaviour of magnesium alloys investigated by the acoustic emission technique10.1002/adem.200600023 ↗
18. Investigation of deformation twinning in a fine-grained and coarse-grained ZM20 Mg alloy: combined in situ neutron diffraction and acoustic emission10.1016/j.actamat.2009.10.057 ↗
19. Grain size effects on deformation twinning in an extruded magnesium alloy tested in compression10.1016/j.scriptamat.2011.05.027 ↗
20. Effect of grain size on the mechanisms of plastic deformation in wrought Mg–Zn–Zr alloy revealed by acoustic emission measurements10.1016/j.actamat.2012.12.024 ↗
21. Influence of yttrium addition on recrystallization, texture and mechanical properties of binary Mg–Y alloys10.1016/j.msea.2020.139856 ↗
22. A rare-earth free magnesium alloy with improved intrinsic ductility10.1038/s41598-017-10384-0 ↗
23. Reducing the tension–compression yield asymmetry in a Mg–8Al–0.5Zn alloy via precipitation10.1016/j.scriptamat.2009.11.024 ↗
24. Strain hardening due to 10 12 twinning in pure magnesium10.1080/14786430701881211 ↗
25. Effect of the loading mode on the evolution of the deformation mechanisms in randomly textured magnesium polycrystals – Comparison of experimental and modeling results10.1016/j.ijplas.2015.05.009 ↗
26. Mechanical response and texture evolution of AZ31 alloy at large strains for different strain rates and temperatures10.1016/j.ijplas.2010.08.009 ↗
27. On the role of Laves phases on the mechanical properties of Mg-Al-Ca alloys10.1016/j.msea.2019.04.048 ↗
28. Quantitative assessment of second phase particles characteristics and its role on the deformation response of a Mg-8Al-0.5Zn alloy10.1016/j.msea.2019.05.052 ↗
29. In-situ studies on deformation and fracture characteristics of AZ91 Mg alloy10.1016/j.mtla.2021.101177 ↗
30. Acoustic emission produced by deformation of metals and alloys - A review
31. Acoustic emission study on the activity of slip and twin mechanisms during compression testing of magnesium single crystals10.1016/j.msea.2015.10.033 ↗
32. Acoustic emission and deformation bands in Al-2.5% Mg and Cu-30% Zn10.1016/0001-6160(87)90284-7 ↗
33. Acoustic emission during the development of a Lüders band in a low-carbon steel10.1134/S1063784208080203 ↗
34. Combination of in-situ diffraction experiments and acoustic emission testing to understand the compression behavior of Mg-Y-Zn alloys containing LPSO phase under different loading conditions10.1016/j.ijplas.2018.03.004 ↗
35. Investigating a twinning–detwinning process in wrought Mg alloys by the acoustic emission technique10.1016/j.actamat.2016.03.013 ↗
36. Kinetics of deformation processes in high-alloyed cast transformation-induced plasticity/twinning-induced plasticity steels determined by acoustic emission and scanning electron microscopy: Influence of austenite stability on deformation mechanisms10.1016/j.actamat.2013.01.016 ↗
37. Evaluation of the strain-induced martensitic transformation by acoustic emission monitoring in 304L austenitic stainless steel: Identification of the AE signature of the martensitic transformation and power-law statistics10.1016/j.msea.2008.04.068 ↗
38. Acoustic emission signal processing framework to identify fracture in aluminum alloys10.1016/j.engfracmech.2018.04.027 ↗
39. High-resolution acoustic emission monitoring in nanomechanics10.1007/s11837-019-03700-8 ↗
40. The nature of acoustic emission during deformation processes in metallic materials10.1063/1.5052679 ↗
41. Deformation behavior and acoustic emission response on uniaxial compression of extruded rectangular profile of MgZnZr alloy10.1016/j.jallcom.2016.03.310 ↗
42. Characterization of microstructure and mechanical properties of Mg–Y–Zn alloys with respect to different content of LPSO phase10.1002/adem.201700396 ↗
43. 2D and 3D characteristics of intermetallic particles and their role in fracture response of AZ91 magnesium alloy
44. Profilometry-based inverse finite element method indentation plastometry10.1002/adem.202100437 ↗
45. Experimental and computational issues for automated extraction of plasticity parameters from spherical indentation10.1016/j.mechmat.2018.06.004 ↗
46. M. Ester, H.-P. Kriegel, J. Sander, X. Xu, A density-based algorithm for discovering clusters in large spatial databases with noise, in: Proceedings of the Second International Conference on Knowledge Discovery and Data Mining, AAAI Press, Portland, Oregon, 1996: pp. 226–231.
47. A study on the phase transformation of γ2-Al8Mn5 to LT-Al11Mn4 during solutionizing in AZ91 alloy10.1016/j.jallcom.2021.159836 ↗
48. Effect of crystal orientation on indentation-induced deformation behavior of zinc10.1016/j.msea.2020.139064 ↗
49. Orientation-dependent indentation response of magnesium single crystals: modeling and experiments10.1016/j.actamat.2014.08.042 ↗
50. Characterization of deformation anisotropies in an α-Ti alloy by nanoindentation and electron microscopy10.1016/j.actamat.2013.05.005 ↗
51. R. Sarvesha, 2023. Mechanical Properties of High Strain Rate Deposited Refractory Metal, JDRE (2023).
52. Plastometrex, 2023. Quantifying Mechanical Property Variations in Conventionally and Additively Manufactured Parts, Plastometrex (n.d.). 〈https://app.livestorm.co/p/d57632d8-d038–44f1-bc54-c4a3885fb5d2〉 (Accessed September 24, 2023).
53. Pattern recognition approach to identify natural clusters of acoustic emission signals10.1016/j.patrec.2011.09.018 ↗
54. DBSCAN revisited, revisited: why and how you should (Still) Use DBSCAN10.1145/3068335 ↗
55. Design and responses of Butterworth and critically damped digital filters10.1016/S1050-6411(03)00080-4 ↗
56. The deformation and ageing of mild steel: III Discussion of results10.1088/0370-1301/64/9/303 ↗
57. The cleavage strength of polycrystals
58. On the resolution of EBSD across atomic density and accelerating voltage with a particular focus on the light metal magnesium10.1016/j.ultramic.2019.112828 ↗
59. Grain size effect on deformation twinning in Mg–Al–Zn alloy10.1179/1743284713Y.0000000237 ↗
60. Effects of grain size and temperature on slip and twinning activity in a magnesium-rare earth alloy10.1016/j.msea.2023.145974 ↗
61. Deformation mechanisms underlying tension–compression asymmetry in magnesium alloy ZK60 revealed by acoustic emission monitoring10.1016/j.msea.2014.10.081 ↗
62. Distribution characteristics of in-grain misorientation axes in cold-rolled commercially pure titanium and their correlation with active slip modes10.1007/s11661-010-0410-4 ↗
63. Tailoring the surface microstructure and texture in pure zinc10.1016/j.msea.2021.141258 ↗
64. Crystallographic classification of kink bands in an extruded Mg–Zn–Y alloy using intragranular misorientation axis analysis10.1016/j.actamat.2012.12.026 ↗
65. The Evolution of In-Grain Misorientation Axes (IGMA) , 2023. During Deformation of Wrought Magnesium Alloy AZ31 | SpringerLink, (n.d.). 〈https://link.springer.com/chapter/10.1007/978–3-319–48099-2_55〉 (Accessed October 18, 2023).
66. Hardening evolution of AZ31B Mg sheet10.1016/j.ijplas.2006.03.005 ↗
67. Mechanical responses and deformation mechanisms of an AZ31 Mg alloy sheet under dynamic and simple shear deformations10.1016/j.ijplas.2014.12.001 ↗
68. A crystal plasticity model for hexagonal close packed (HCP) crystals including twinning and de-twinning mechanisms10.1016/j.ijplas.2013.02.016 ↗
69. Study of slip mechanisms in a magnesium alloy by neutron diffraction and modeling10.1016/S1359-6462(02)00591-2 ↗
70. Numerical study of deformation behavior of rolled AZ31B plate under cyclic loading in different material orientations based on the EVPSC-TDT model10.1016/j.ijplas.2021.103109 ↗
71. Mechanik der plastischen Formänderung von Kristallen10.1002/zamm.19280080302 ↗
72. The nucleation problem in deformation twinning10.1016/0001-6160(53)90035-2 ↗
73. The crystallography and deformation modes of hexagonal close-packed metals10.1179/imr.1967.12.1.169 ↗
74. Deformation twinning10.1016/0079-6425(94)00007-7 ↗
75. The kinetics of twinning in zinc and tin crystals
76. Shear-driven motion of Mg ${10\overline{1}2}$ twin boundaries via disconnection terrace nucleation, growth, and coalescence
77. On the limits of acoustic emission detectability for twinning10.1016/j.matlet.2016.07.063 ↗
78. Acoustic emission as a tool for exploring deformation mechanisms in magnesium and its alloys in situ10.1007/s11837-016-1966-2 ↗