journal article·2024-04

Stable SnSxSe1−x/CdS thin-film solar cells via single-source vapor transport deposition: unveiling band alignment at heterojunction interface

Pravin S. Pawar, Rahul Kumar Yadav, Indu Sharma, Parag R. Patil, Neha Bisht, Yong Tae Kim, Navaj B. Mullani, Jaeyeong Heo

Publisher page

Abstract

SnS xSe 1−x films can be fabricated by adjusting the Se/(Se + S) ratio by using two different source materials (SnS + SnSe or S + Se). However, maintaining a uniform composition throughout the film can be challenging when using conventional double-source methods. Here, we have developed a single-source vapor-transport-deposition (VTD) method to deposit highly compact and uniform SnS xSe 1−x alloy films with a Se/(Se + S) compositional ratio of 0.3. Furthermore, we fabricate thin-film solar cell (TFSC) devices with varying evaporation durations ranging from 3 to 7 h. By increasing the evaporation duration from 3 to 7 h, the thickness of the SnS 0.7Se 0.3 absorber layer nearly doubled from around 1.05 µm to approximately 2.0 µm. As a result, the solar cell device (SLG/Mo/SnS 0.7Se 0.3/CdS/i-ZnO/AZO/Al) fabricated with a 5-h evaporation duration, which had an absorber thickness of approximately 1.55 µm and a bandgap of 1.18 eV, achieved a highest efficiency of 3.59%. In addition, its V OC, J SC, and FF were 0.284 V, 24.50 mA cm −2, and 51.3%, respectively. Furthermore, the band alignment at the SnS 0.7Se 0.3 /CdS interface was investigated to determine the conduction band offset (CBO) and valence band offset (VBO). The results confirmed a cliff-like CBO of −0.07 eV at the SnS 0.7Se 0.3/CdS interface. The optimized device retained almost 99.9% of its initial efficiency after 6 months of storage in the air.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Doping strategies in Sb2S3 thin films for solar cells10.1002/smll.202100241 ↗
2. Regulating energy band alignment via alkaline metal fluoride assisted solution post-treatment enabling Sb2(S,Se)3 solar cells with 10.7% efficiency
3. Defect suppression for high-efficiency kesterite CZTSSe solar cells: advances and prospects10.1016/j.cej.2023.142121 ↗
4. Recent advances and new research trends in Sb2S3 thin film based solar cells
5. Control of the phase evolution of kesterite by tuning of the selenium partial pressure for solar cells with 13.8% certified efficiency10.1038/s41560-023-01251-6 ↗
6. Efficiency enhancement of CZTSSe solar cells via screening the absorber layer by examining of different possible defects10.1038/s41598-020-75686-2 ↗
7. Defects passivation via potassium iodide post-treatment for antimony selenosulfide solar cells with improved performance
8. Open-circuit voltage loss of antimony chalcogenide solar cells: status, origin, and possible solutions10.1021/acsenergylett.0c00940 ↗
9. SnSxSe1–x/Ag nanosheet thin films for solar energy water splitting10.1021/acsanm.1c02776 ↗
10. Origin of p-type characteristics in a SnSe single crystal10.1063/1.4991003 ↗
11. Band-structure, optical properties, and defect physics of the photovoltaic semiconductor SnS10.1063/1.3675880 ↗
12. Vapor-transport-deposited orthorhombic-SnSe thin films: a potential cost-effective absorber material for solar-cell applications10.1002/solr.202100676 ↗
13. Prebaking of SnS source with sulfur for achieving higher photovoltaic performance in VTD-SnS thin films for solar cells10.1039/D3TA05204D ↗
14. High-speed vapor transport deposition of perovskite thin films10.1021/acsami.9b07651 ↗
15. All-vacuum-processed Sb2(S,Se)3 thin film photovoltaic devices via controllable tuning seed orientation
16. One-step vapor transport deposition for tuning the photovoltaic performance of SnSxSe1–x solar cells: analysis of the improved Voc and Jsc10.1021/acsaem.2c02887 ↗
17. Over 7% efficiency of Sb2(S,Se)3 solar cells via V-shaped bandgap engineering10.1002/solr.202000220 ↗
18. Highly efficient and stable planar heterojunction solar cell based on sputtered and post-selenized Sb2Se3 thin film10.1016/j.nanoen.2019.103929 ↗
19. Vapor transport deposition of highly efficient Sb2(S,Se)3 solar cells via controllable orientation growth
20. Vapor transport deposition of methylammonium iodide for perovskite solar cells10.1021/acsaem.0c02999 ↗
21. Sb2(Se1−xSx)3 thin-film solar cells fabricated by single-source vapor transport deposition10.1002/solr.201800280 ↗
22. Thin film solar cells of cubic structured SnS-SnSe10.1002/pssa.201700036 ↗
23. Materials properties of electrodeposited SnS0.5Se0.5 films and characterization of photoelectrochemical solar cells10.1016/S0025-5408(03)00031-X ↗
24. Detailed balance limit of efficiency of p‐n junction solar cells10.1063/1.1736034 ↗
25. Kinetically controlled growth of phase-pure SnS absorbers for thin film solar cells: achieving efficiency near 3% with long-term stability using an SnS/CdS heterojunction10.1002/aenm.201702605 ↗
26. Modulation and direct mapping of the interfacial band alignment of an eco-friendly zinc-tin-oxide buffer layer in SnS solar cells10.1021/acsaem.2c03129 ↗
27. Over 9% efficient kesterite Cu2ZnSnS4 solar cell fabricated by using Zn1–xCdxS buffer layer10.1002/aenm.201600046 ↗
28. Enhancing the photovoltaic properties of SnS-based solar cells by crystallographic orientation engineering10.1016/j.solmat.2021.111499 ↗
29. Novel SnSxSe1−x nanocrystals with tunable bandgap: experimental and first-principles calculations10.1039/c1jm12968f ↗
30. Ternary SnS2–xSex alloys nanosheets and nanosheet assemblies with tunable chemical compositions and band gaps for photodetector applications10.1038/srep17109 ↗
31. Epitaxy of layered orthorhombic SnS–SnSxSe(1−x) core–shell heterostructures with anisotropic photoresponse10.1002/adfm.201600699 ↗
32. Facile synthesis of SnS and SnS2 nanosheets for FTO/SnS/SnS2/Pt photocathode10.1021/acsaem.8b01414 ↗
33. Superficial composition engineering for oxide nanoparticles derived Cu2ZnSn(S,Se)4 solar cells by a three-step annealing process10.1016/j.solener.2019.10.026 ↗
34. Surface Intercalated spherical MoS2xSe2(1−x) nanocatalysts for highly efficient and durable hydrogen evolution reactions10.1039/C9DT01218D ↗
35. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
36. Identifying parasitic current pathways in CIGS solar cells by modelling dark J–V response10.1002/pip.2582 ↗
37. Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10% efficiency10.1038/s41560-020-0652-3 ↗
38. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
39. Low-dimensional perovskite interlayer for highly efficient lead-free formamidinium tin iodide perovskite solar cells10.1016/j.nanoen.2018.05.006 ↗
40. Cold antisolvent bathing derived highly efficient large-area perovskite solar cells
41. Carrier transport enhancement mechanism in highly efficient antimony selenide thin-film solar cell10.1002/adfm.202213941 ↗
42. Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency10.1038/s41467-018-04634-6 ↗
43. Exploring the potential of standalone and tandem solar cells with Sb2S3 and Sb2Se3 absorbers: a simulation study10.1038/s41598-023-49269-w ↗
44. Overcoming efficiency limitations of SnS-based solar cells10.1002/aenm.201400496 ↗
45. Preparation and characterization of tin sulfide films with or without sodium chloride10.1016/j.chemphys.2020.110766 ↗
46. Preparation of single-phase SnSe thin-films and modification of electrical properties via stoichiometry control for photovoltaic application10.1016/j.jallcom.2017.06.094 ↗
47. Valence band offset at the CdS/Cu2ZnSnS4 interface probed by x-ray photoelectron spectroscopy10.1088/0022-3727/46/17/175101 ↗
48. Experimental determination of band offsets at the SnS/CdS and SnS/InSxOy heterojunctions10.1063/1.3294619 ↗
49. Solution-Processed ZnxCd1–xS buffer layers for vapor transport-deposited SnS thin-film solar cells: achieving high open-circuit voltage10.1021/acsami.9b14329 ↗
50. Achieving over 4% efficiency for SnS/CdS thin-film solar cells by improving the heterojunction interface quality10.1039/D0TA06937J ↗
51. Enhanced photovoltaic performance of Sb2S3-sensitized solar cells through surface treatments10.1016/j.apsusc.2018.01.090 ↗