Effect of low-temperature annealing on electric resistivity and mechanical anisotropy of Al-Si binary alloy fabricated by laser-powder bed fusion
Source abstract
Abstract
Al-12mass%Si binary alloy was fabricated by laser-powder bed fusion (L-PBF). The effect of low temperature annealing (LTA) less than 573 K on electrical and mechanical properties, microstructure, and residual stress of L-PBF Al-12mass%Si was investigated. Due to LTA, electrical resistivity at 77 K and 293 K changed from 34 nΩm down to 10 nΩm and from 68 nΩm down to 45 nΩm, respectively. The lattice constant of α-Al phase increased around 0.0005 nm by LTA according to X-ray diffraction. The change was associated with the decrease in the concentration of solid-solution Si of around 3.4 mass% by electrical resistivity measurement and 3 mass% by X-ray diffraction, when the annealing temperature was 473 K. Whereas, Vickers hardness increases around 145 HV compared with that for the as-built value of 141 HV, and then, decreases down to 126 HV and saturates. TEM/EDS observations confirmed the precipitation of fine Si within the α-Al phase. The decrease in annealing temperature increases the time to reach the Vickers hardness peak. 0.2% proof stress obtained by compression tests shows anisotropy, which can be attributed to the anisotropy on residual stress, which still exists after LTA.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Damage-tolerant architected materials inspired by crystal microstructure10.1038/s41586-018-0850-3 ↗
2. Effects of heat treatments on compressive deformation behaviors of lattice-structured alsi10mg alloy fabricated by selective laser melting10.1002/adem.201900571 ↗
3. Development of gradient microstructure in the lattice structure of AlSi10Mg alloy fabricated by selective laser melting10.1016/j.jmst.2019.06.015 ↗
4. Material-structure-performance integrated laser-metal additive manufacturing10.1126/science.abg1487 ↗
5. New aluminum alloys specifically designed for laser powder bed fusion: a review10.3390/ma12071007 ↗
6. Yadroitsev · 2021
7. Additive manufacturing of metallic components - process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
8. 3D printing of aluminium alloys: additive Manufacturing of Aluminium alloys using selective laser melting10.1016/j.pmatsci.2019.100578 ↗
9. Anomalous strengthening by supersaturated solid solutions of selectively laser melted Al-Si-based alloys
10. A review of Laser Powder Bed Fusion Additive Manufacturing of aluminium alloys: microstructure and properties
11. Fracture resistance of AlSi10Mg fabricate d by laser powder bed fusion10.1016/j.actamat.2021.116869 ↗
12. Review on the correlation between microstructure and mechanical performance for laser powder bed fusion AlSi10Mg
13. Fast scanning calorimetry study of Al alloy powder for understanding microstructural development in laser powder bed fusion10.1016/j.matdes.2022.110830 ↗
14. Tensile and compressive behaviour of additively manufactured AlSi10Mg samples10.1007/s40964-020-00131-9 ↗
15. Effect of annealing on anisotropic tensile properties of Al-12%Si alloy fabricated by laser powder bed fusion10.3390/cryst10111007 ↗
16. The effect of defect population on the anisotropic fatigue resistance of AlSi10Mg alloy fabricated by laser powder bed fusion10.1016/j.ijfatigue.2021.106317 ↗
17. Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments10.1016/j.msea.2017.08.029 ↗
18. Heat treatment of aluminium alloys produced by laser powder bed fusion: a review10.1016/j.matdes.2021.109651 ↗
19. Heat treatment for metal additive manufacturing10.1016/j.pmatsci.2022.101051 ↗
20. Effect of low-temperature annealing on electrical resistivity and mechanical properties of laser-powder bed fused AlSi10Mg alloy10.1016/j.msea.2023.144876 ↗
21. Low temperature annealing dedicated to AlSi10Mg selective laser melting products10.1016/j.jallcom.2016.12.019 ↗
22. Effects of platform pre-heating and thermal-treatment strategies on properties of AlSi10Mg alloy processed by selective laser melting10.3390/met8110954 ↗
23. Damage mechanisms in selective laser melted AlSi10Mg under as built and different post-treatment conditions10.1016/j.msea.2019.138210 ↗
24. Evolution of the microstructure and mechanical properties of additively manufactured AlSi10Mg during room temperature holds and low temperature aging
25. Thermal post-processing of AlSi10Mg parts produced by Selective Laser Melting using recycled powder
26. Effect of direct aging on the microstructure and tensile properties of AlSi10Mg alloy manufactured by selective laser melting process10.1016/j.matchar.2021.111113 ↗
27. Unravelling the multi-scale structure-property relationship of laser powder bed fusion processed and heat-treated AlSi10Mg10.1038/s41598-021-85047-2 ↗
28. Aging profiles of AlSi7Mg0.6 and AlSi10Mg0.3 alloys manufactured via laser-powder bed fusion: direct aging versus T610.3390/ma15176126 ↗
29. Effect of heat treatment on solute Si content in Al-12%Si alloy additive-manufactured by laser powder bed fusion10.2464/jilm.72.178 ↗
30. Negative strain rate sensitivity of yield strength of Al-Si alloy additive-manufactured using laser powder bed fusion10.1016/j.scriptamat.2022.114635 ↗
31. Microstructural origin of anisotropic tensile ductility of Al-Si alloy manufactured by laser powder bed fusion10.1016/j.scriptamat.2022.115259 ↗
32. C. Kittel, Introduction to Solid State Physics, Wiley2004.
33. Change in electrical resistivity of commercial purity aluminium severely plastic deformed10.1080/14786435.2010.510453 ↗
34. An experimental investigation of extrapolation methods in the derivation of accurate unit-cell dimensions of crystals10.1088/0959-5309/57/3/302 ↗
35. A method of X-ray microbeam measurement of local stress and its application to fatigue crack growth problems10.2472/jsms.27.251 ↗
36. X-ray triaxial stress analysis using whole diffraction ring detected with imaging plate10.1299/kikaia.61.2288 ↗
37. Study on laser scan strategy for correcting anisotropic residual stress distribution and reducing warpage in structures fabricated by PBF-LB/M10.20965/ijat.2023.p0369 ↗
38. Microstructural change due to isochronal annealing in severely plastic-deformed commercial purity aluminium10.1080/14786435.2015.1021400 ↗
39. Change in electrical resistivity of pure Cu processed by accumulative roll bonding10.2320/matertrans.M2017298 ↗
40. Change in mechanical and electrical properties of accumulative roll bonding processed high-purity aluminum, Al-0.02 mass%Fe and Al-0.2 mass%Fe Alloys10.2320/matertrans.L-M2019864 ↗
41. Change in electrical resistivity in nickel processed by accumulative roll bonding10.2320/matertrans.MT-M2021063 ↗
42. High strength and low electrical resistivity of Al-0.1 at%Ni alloys produced by accumulative roll bonding
43. Calculation of electrical-resistivity produced by dislocations and grain-boundaries in metals10.1088/0953-8984/6/4/007 ↗
44. Resistivity of light alloys changed with deformation and heat treatment10.2464/jilm.60.511 ↗
45. Aluminum—1. A review of resistive mechanisms in aluminum10.1016/0011-2275(71)90036-1 ↗
46. Characterization of Al-Si-alloys rapidly quenched from the melt10.1007/BF00550549 ↗
47. Elucidating the microscopic origin of electrochemical corrosion and electrical conductivity by lattice response to severe plastic deformation in Al-Mn-Si alloy10.1016/j.materresbull.2018.09.011 ↗
48. In situ alloying of AlSi10Mg-5 wt% Ni through laser pwder bed fusion and subsequent heat treatment10.1016/j.jallcom.2022.164081 ↗
49. Enhancement in strength and ductility of laser powder bed fused Al–12Si alloy by introducing nanoscale precipitates
50. Managing both high strength and thermal conductivity of a laser powder bed fused Al-2.5Fe binary alloy: effect of annealing on microstructure10.1016/j.msea.2020.140591 ↗
51. Design of Al-Fe-Mn alloy for both high-temperature strength and sufficient processability of laser powder bed fusion