journal article·2024-01

Characterisation of hydride formation in as-built and heat treated laser powder bed fused Ti-6Al-4V

Liesbet Deconinck, Tom Depover, Kim Verbeken

Publisher page

Abstract

Despite the increasing developments in laser powder bed fusion (L-PBF) of titanium, no relationships have been established yet on the hydride formation in the L-PBF titanium alloy Ti-6Al-4V. Nevertheless, insights in the development of titanium hydrides in this particular microstructure are e.g. useful for thermohydrogen processing and to avoid premature failure. Therefore, this work investigated the formation of titanium hydrides in as-built and heat treated L-PBF Ti-6Al-4V. Hydrogen was introduced via electrochemical hydrogen charging until hydrides precipitated. The evolution of titanium hydride formation was observed to be closely related to the microstructure, being associated to the hydrogen solubility and diffusivity in the different crystallographic phases. Investigation by scanning electron microscopy (SEM) and X-ray diffraction (XRD) demonstrated that parallelisms could be drawn to the hydride development in conventionally manufactured pure α and α-β titanium alloys, for as-built and heat treated L-PBF Ti-6Al-4V, respectively. Phase and texture analysis were performed with electron backscatter diffraction (EBSD) to identify the orientation relationships between the original microstructural phases and the formed δ hydrides. It was observed in heat treated L-PBF Ti-6Al-4V that intragranular δ hydrides inside the α grains precipitated according to the 0001 α // 1 1 ̅ 1 δ orientation relationship. On the other hand, hydrides at grain boundaries developed rather according to the 0001 α // 001 δ orientation relationship. Furthermore, nuances in hydrogen interaction are highlighted with respect to the conventionally manufactured counterparts.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. Influence of processing on microstructure and mechanical properties of (α + β) titanium alloys10.1016/S0921-5093(97)00778-8 ↗
2. Hydrogen-enabled microstructure and fatigue strength engineering of titanium alloys10.1038/srep41444 ↗
3. Microstructural evolution of a Ti-6Al-4V alloy during thermomechanical processing10.1016/S0921-5093(01)01531-3 ↗
4. Image-based crystal plasticity FE framework for microstructure dependent properties of Ti-6Al-4V alloys10.1016/j.msea.2012.06.006 ↗
5. Additive manufacturing of Ti6Al4V alloy: a review10.1016/j.matdes.2018.107552 ↗
6. Additive manufacturing of titanium-based alloys: a review of methods, properties, challenges, and prospects10.1016/j.heliyon.2022.e09041 ↗
7. Selective laser melting of titanium alloys and titanium matrix composites for biomedical applications: a review10.1002/adem.201500419 ↗
8. Dutta · 2017 · vol. 72
9. Lütjering · 2007
10. Gulyaev · 1980
11. Review of laser powder bed fusion (LPBF) fabricated Ti-6Al-4V: process, post-process treatment, microstructure, and property
12. Phase transformations and characterization of α + β titanium alloys
13. Optimization of microstructural manipulation and ductility in laser powder bed fusion Ti-6Al-4V through hydrogen heat treatments10.1016/j.msea.2023.145061 ↗
14. Evaluation of microstructural development in electron beam melted Ti-6Al-4V10.1016/j.matchar.2011.12.008 ↗
15. Comparison of the microstructures and mechanical properties of Ti-6Al-4V fabricated by selective laser melting and electron beam melting10.1016/j.matdes.2015.12.135 ↗
16. A review of heat treatments on improving the quality and residual stresses of the Ti-6Al-4V parts produced by additive manufacturing10.3390/met10081006 ↗
17. Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti-6Al-4V) fabricated using electron beam melting (EBM), part 1: Distance from build plate and part size10.1016/j.msea.2013.02.064 ↗
18. Hydrogen Embrittlement10.1016/B978-0-12-341825-8.50014-3 ↗
19. Environmental hydrogen embrittlement of an α-β titanium alloy: Effect of microstructure10.1007/BF02642051 ↗
20. Hydrogen absorption and hydride formation in pure titanium T40 (grade 2) and TA6V ELI (grade 23) under cathodic polarization in artificial seawater10.1051/matecconf/202032109006 ↗
21. The effects of low fugacity hydrogen in duplex- and beta-annealed Ti-6Al-4V alloy10.1016/j.msea.2004.04.020 ↗
22. Mechanical behavior of electrochemically hydrogenated electron beam melting (EBM) and wrought Ti-6Al-4V using small punch test10.1016/j.ijhydene.2021.11.231 ↗
23. Hydrogen trapping in additive manufactured Ti-6Al-4V alloy10.1016/j.msea.2021.141050 ↗
24. Solute hydrogen and hydride phase implications on the plasticity of zirconium and titanium alloys: a review and some recent advances
25. Hydrogen effects on electrochemically charged additive manufactured by electron beam melting (EBM) and wrought Ti–6Al–4V alloys10.1016/j.ijhydene.2020.06.277 ↗
26. X. Feaugas and E. Conforto, Influence de l′hydrogène sur les mécanismes de déformation et d′endommagement des alliages de titane et de zirconium, PlastOx 2007 - Mec. Mec. des Interact. Plast. - Environ., vol. 2007, pp. 161–178, 2009, doi: 10.1051/ptox/2009012.10.1051/ptox/2009012 ↗
27. Effects of electrolytic hydrogenating parameters on structure and composition of surface hydrides of CP-Ti and Ti-6Al-4V alloy10.1016/S0254-0584(01)00403-5 ↗
28. Hydride formation in Ti6Al4V: An in situ synchrotron X-ray diffraction study10.1016/j.scriptamat.2020.10.025 ↗
29. Hydrogenation-induced lattice expansion and its effects on hydrogen diffusion and damage in Ti-6Al-4V10.1016/j.actamat.2020.02.029 ↗
30. The mechanism of hydride formation during electrochemical hydrogen charging of Ti-6Al-4V
31. In-situ scanning electron microscope thermal desorption spectroscopy (SEM-TDS) analysis of thermally-induced titanium hydride decomposition and reformation10.1016/j.actamat.2021.117562 ↗
32. Determination of orientation relationships between FCC-hydride and HCP-titanium and their correlation with hydrides distribution10.1016/j.jallcom.2019.153297 ↗
33. A fast method for determining favourable orientation relationships and interface planes: application to titanium-titanium hydrides transformations10.1016/j.actamat.2006.06.061 ↗
34. Crystallographic orientation dependence of hydride precipitation in commercial pure titanium10.1016/j.actamat.2019.11.027 ↗
35. A quantitative study on the effect of heat treatment on the microstructure and orientation of titanium hydride in electrochemically hydrogenated pure titanium10.1007/s40195-022-01423-5 ↗
36. Hydrogen embrittlement of α titanium: In situ TEM studies10.1016/0001-6160(88)90032-6 ↗
37. Hydrogen-assisted processing of materials10.1016/S0921-5093(00)00906-0 ↗
38. Thermohydrogen processing of titanium alloys10.1016/S0360-3199(98)00112-8 ↗
39. Hydrogen trapping in 3D-printed (additive manufactured) Ti-6Al-4V10.1016/j.matchar.2018.07.029 ↗
40. Influence of electrochemically charged hydrogen on mechanical properties of Ti–6Al–4V alloy additively manufactured by laser powder-bed fusion (L-PBF) process
41. Thermal decomposition of titanium hydrides in electrochemically hydrogenated electron beam melting (EBM) and wrought Ti–6Al–4V alloys using in situ high-temperature X-Ray diffraction10.1016/j.ijhydene.2021.06.166 ↗
42. R. Gaddam, B. Sefer, R. Pederson, and M.-L. Antti, Study of alpha-case depth in Ti-6Al-2Sn-4Zr-2Mo and Ti-6Al-4V, in 7th EEIGM International Conference on Advanced Materials Research, 2013, vol. 48, p. 012002. doi: 10.1088/1757–899X/48/1/012002.10.1088/1757-899X/48/1/012002 ↗
43. Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties10.1016/j.jallcom.2012.07.022 ↗
44. Phase transformations during cooling in α+β titanium alloys10.1016/S0921-5093(97)00802-2 ↗
45. Prior β grain evolution and phase transformation of selective laser melted Ti6Al4V alloy during heat treatment10.1016/j.jallcom.2022.165235 ↗
46. The effect of process parameters on residual stress evolution and distortion in the laser powder bed fusion of Ti-6Al-4V
47. Hydrogen diffusion and trapping in a steel containing porosities10.1016/j.corsci.2022.110208 ↗
48. The mechanism behind the effect of building orientation and surface finish on hydrogen embrittlement in laser powder bed fused Ti-6Al-4V
49. Heat treatment effects on the hydrogen embrittlement of Ti6Al4V fabricated by laser beam powder bed fusion
50. In-situ hydrogen embrittlement evaluation of as-built and heat treated laser powder bed fused Ti-6Al-4V versus conventionally cold rolled Ti-6Al-4V
51. The hydrogen sorption and desorption behavior in spherical powder of pure titanium used for additive manufacturing10.1016/j.ijhydene.2017.04.248 ↗
52. Lattice strains due to hydrogen in metals
53. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
54. Heat treating of titanium and titanium alloys
55. Beam current effect on microstructure and properties of electron-beam-melted Ti-6Al-4V alloy10.1007/s11665-019-04344-0 ↗
56. The hydrogen embrittlement of titanium-based alloys
57. Precipitation characteristics and distributions of subsurface hydrides in zirconium10.1016/j.actamat.2021.117146 ↗
58. Hydrogen in zirconium alloys: a review10.1016/j.jnucmat.2019.02.042 ↗
59. A review of hydride precipitates in titanium and zirconium alloys: precipitation, dissolution and crystallographic orientation relationships10.1051/matecconf/202032111042 ↗
60. Influence of texture on fatigue properties of Ti-6Al-4V10.1007/BF02657799 ↗
61. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
62. A resolution of the interface phase problem in titanium alloys10.1016/0001-6160(88)90033-8 ↗
63. On the texture formation of selective laser melted Ti-6Al-4V10.1007/s11661-014-2218-0 ↗
64. Influence of hydrogen on mechanical properties of pure titanium T40 (grade 2) and TA6V ELI (grade 23): a local approach of fracture10.1051/matecconf/202032109007 ↗
65. A. Poloni, Étude de la sensibilité à la fragilisation par l′hydrogène de deux alliages de titane, le T40 et le TA6V ELI, sous polarisation cathodique en eau de mer par une approche locale de la rupture, 2020.
66. Hydride precipitation in titanium10.1016/0001-6160(84)90236-0 ↗
67. Hydrogen transport through thin titanium oxides10.1016/j.jelechem.2010.06.022 ↗
68. Hydriding of titanium: recent trends and perspectives in advanced characterization and multiscale modeling10.1016/j.cossms.2022.101020 ↗
69. Mechanisms of hydrogen induced delayed cracking in hydride forming materials10.1007/BF02644858 ↗
70. Determination of the hydrogen site occupation in the α phase of zirconium hydride and in the α and β phases of titanium hydride by inelastic neutron scattering10.1088/0305-4608/12/1/003 ↗
71. Crystal defect associated selection of phase transformation orientation relationships (ORs)10.1016/j.actamat.2018.04.031 ↗
72. Hydrides in α-Ti: characterization and effect of applied external stresses10.1016/j.actamat.2005.06.004 ↗
73. The precipitation of γ-hydride plates in zirconium10.1016/0001-6160(81)90074-2 ↗
74. Deformation induced FCC lamellae and their interaction in commercial pure Ti10.1016/j.scriptamat.2018.11.037 ↗
75. Rolling-induced face centered cubic titanium in hexagonal close packed titanium at room temperature
76. Strain direction dependency of deformation mechanisms in an HCP-Ti crystalline by molecular dynamics simulations10.1016/j.commatsci.2019.109328 ↗
77. Phase-field modeling of stacking structure formation and transition of δ-hydride precipitates in zirconium10.1016/j.actamat.2018.12.009 ↗