journal article·2023-12

Coarsening of needle-shaped precipitates in CoNiCrAl alloys during isothermal heat treatment: Kinetics in length and thickness

H. Chen, Z. Li, X. Wang

Publisher page

Abstract

This paper investigated the coarsening kinetics of needle-shaped γ precipitates in CoNiCrAl alloys after isothermal heat treatments at 900 °C and 1100 °C. The CoNiCrAl alloys were prepared by vacuum induction melting and casting process. They were characterised to exhibit a two-phase γ + β structure and some needle-shaped secondary γ precipitates were formed within the primary β phase during isothermal heat treatments. The coarsening of the needle-shaped secondary γ precipitates occurred with heat treatment time and became more rapid at elevated temperatures. In particular, the coarsening kinetics of needle-shaped γ precipitates in length and thickness were specifically studied. It was found that the coarsening kinetics in length and thickness was a volume diffusion governed process and generally followed the classic Lifshitz-Slyozov-Wagner (LSW) theory. An analytical model was proposed to estimate the lengthening and thickening of the precipitates, which considered the aspect ratio and volume fraction of the precipitates. The calculated coarsening rate in thickness agreed well with the experimentally determined value. But some discrepancies were found between the predicted and measured coarsening rate in length. This might be due to the termination migration effects of the needle-shaped precipitates which restricted the coarsening rate in length.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Effect of temperature cycling on ostwald ripening10.1021/acs.cgd.8b00267 ↗
2. Self-similar coarsening: a test of theory10.1016/j.actamat.2015.08.036 ↗
3. Precipitate coarsening and its effects on the hot deformation behavior of the recently developed γ'-strengthened superalloys10.1016/j.jmst.2020.06.025 ↗
4. Coarsening behavior of an alpha-beta titanium alloy10.1007/s11661-004-0228-z ↗
5. The kinetics of precipitation from supersaturated solid solutions10.1016/0022-3697(61)90054-3 ↗
6. Theorie der alterung von niederschlägen durch umlösen (Ostwald‐reifung), Zeitschrift für Elektrochemie
7. Review Progress in Ostwald ripening theories and their applications to the γ′-precipitates in nickel-base superalloys Part II Nickel-base superalloys10.1023/A:1015408116016 ↗
8. On the theory of normal and abnormal grain growth10.1016/0001-6160(65)90200-2 ↗
9. Aspects of coarsening in eutectic Sn–Pb10.1016/j.actamat.2004.03.045 ↗
10. Microstructural evolution of a MCrAlY coating upon isothermal annealing10.1016/j.matchar.2008.03.011 ↗
11. Coarsening kinetics of γ′ precipitates in a Re-containing Ni-based single crystal superalloy during long-term aging10.1016/j.jmst.2020.05.034 ↗
12. The effect of volume fraction on particle coarsening: theoretical considerations10.1016/0001-6160(72)90114-9 ↗
13. Diffusion to a random array of identical spherical sinks10.1016/0022-3115(76)90140-9 ↗
14. The dependence of Ostwald ripening kinetics on particle volume fraction10.1016/0001-6160(79)90041-5 ↗
15. Solution to the multi-particle diffusion problem with applications to Ostwald ripening—II. Computer simulations10.1016/0001-6160(84)90181-0 ↗
16. Theory of Ostwald ripening: competitive growth and its dependence on volume fraction10.1063/1.446427 ↗
17. Statistical-mechanical theory of coarsening of spherical droplets10.1016/0378-4371(84)90162-6 ↗
18. Coarsening models incorporating both diffusion geometry and volume fraction of particles10.1016/0001-6160(83)90221-3 ↗
19. Shape factors in modeling of precipitation10.1016/j.msea.2006.08.088 ↗
20. Modified evolution equations for the precipitation kinetics of complex phases in multi-component systems10.1016/j.calphad.2004.11.003 ↗
21. Modelling of kinetics in multi-component multi-phase systems with spherical precipitates: I: Theory
22. An age-hardening model for Al-Mg-Si alloys considering needle-shaped precipitates10.1007/s11661-012-1211-8 ↗
23. Influence of interfacial properties on the kinetics of precipitation and precipitate coarsening in aluminium-silver alloys10.1016/0001-6160(79)90043-9 ↗
24. Precipitation of non-spherical particles in aluminum alloys part I: Generalization of the Kampmann–Wagner numerical model10.1007/s11661-015-3197-5 ↗
25. Ostwald ripening of spheroidal particles in multicomponent alloys10.1016/j.actamat.2018.04.041 ↗
26. Microstructure and thermophysical properties of as-cast CoNiCrAl bond coat alloys at different Al contents
27. Size effects on high temperature oxidation of MCrAlY coatings processed via APS and HVOF depositions10.1016/j.surfcoat.2022.128483 ↗
28. Bioxidant corrosion behaviour of CoNiCrAlY coated IN738 at 1100 °C10.1016/j.corsci.2019.02.014 ↗
29. Thermodynamic calculation and experimental analysis of critical phase transformations in HVOF-sprayed NiCrAlY-coating alloys10.1016/j.surfcoat.2018.10.057 ↗
30. Thermo-Calc and DICTRA modelling of the β-phase depletion behaviour in CoNiCrAlY coating alloys at different Al contents10.1016/j.commatsci.2018.02.013 ↗
31. Effects of temperature on the β-phase depletion in MCrAlYs: a modelling and experimental study towards designing new bond coat alloys10.1016/j.surfcoat.2019.02.024 ↗
32. Tailoring coating composition for the associated microstructural stability of a single-crystal superalloy: An experimental and simulation study10.1016/j.corsci.2022.110916 ↗
33. Modelling of phase equilibria in MCrAlY coating systems10.1016/j.surfcoat.2004.02.018 ↗
34. Effect of Al content on the oxidation behavior of NiCoCrAlYHf alloys at 1100 ℃10.1016/j.corsci.2023.111417 ↗
35. Microstructure evolution of as-cast CoNiCrAl bond coat alloys after isothermal heat treatments10.1016/j.matchar.2023.113183 ↗
36. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
37. Particle growth by coalescence during liquid phase sintering of Fe-Cu10.1016/0001-6160(84)90208-6 ↗
38. Ostwald ripening in a system with a high volume fraction of coarsening phase10.1007/BF02645806 ↗
39. An analytical approach to the β-phase coarsening behaviour in a thermally sprayed CoNiCrAlY bond coat alloy10.1016/j.jallcom.2017.02.002 ↗
40. Shape-preserving solutions of the time-dependent diffusion equation10.1090/qam/108196 ↗
41. Theory of diffusion-limited precipitation10.1016/0022-3697(58)90053-2 ↗
42. The coarsening behaviour of θ″and θ′ precipitates in two Al-Cu alloys10.1016/0001-6160(71)90076-9 ↗
43. Influence of interfacial properties on the kinetics of precipitation and precipitate coarsening in aluminium-silver alloys10.1016/0001-6160(79)90043-9 ↗
44. Assessments of molar volume and thermal expansion for selected bcc, fcc and hcp metallic elements10.1016/j.calphad.2005.05.001 ↗
45. Co diffusion in a B2-type ordered NiAl compound10.2320/jinstmet1952.66.2_67 ↗
46. Generalized Nearest-Neighbor Broken-Bond Analysis of Randomly Oriented Coherent Interfaces in Multicomponent Fcc and Bcc Structures10.1007/s11661-008-9752-6 ↗
47. Application of a modified Ostwald ripening theory in coarsening of γ′ phases in Ni based single crystal superalloys10.1016/j.jallcom.2015.01.215 ↗
48. Thermo-kinetic modeling of Cu precipitation in α-Fe10.1016/j.actamat.2015.08.042 ↗
49. An EAM simulation of the alpha-gamma iron interface10.1088/0965-0393/1/5/010 ↗
50. J.W. Martin, R.D. Doherty, B. Cantor, Stability of microstructure in metallic systems, Cambridge University Press, 1997.10.1017/CBO9780511623134 ↗
51. Coarsening kinetics of lamellar microstructures: Experiments and simulations on a fully-lamellar Fe-Al in situ composite10.1016/j.actamat.2017.01.041 ↗
52. The effect of rare earth elements on the kinetics of the isothermal coarsening of the globular solid phase in semisolid AZ91 alloy produced via SIMA process10.1016/j.jallcom.2009.09.112 ↗
53. Review on globularization of titanium alloy with lamellar colony
54. Static coarsening behavior of the lamellar alpha in Ti-17 alloy10.1016/j.jallcom.2015.01.106 ↗
55. Static globularization kinetics for Ti-17 alloy with initial lamellar microstructure10.1016/j.jallcom.2014.03.082 ↗
56. Prediction of termination migration of a rod-type particle in Ti–6Al–4Fe alloy10.1080/09500839.2012.721569 ↗