journal article·2023-12

Local twinning behavior of ZK61m magnesium alloy sheet under multiaxial stress during drawing-pressing with Erichsen test machine

Yuanying Chang, Jing Tian, Jia-fei Deng, Yancai Zhou, Xiaogang Wang, Wei Liang, Quan-xin Shi

Publisher page

Abstract

In order to find a more effective method to preset twins and to explore the microstructure and twin evolution of magnesium alloy sheet under multi-axial stress state deformation, drawing-pressing deformation with Erichsen test machine is used as a sheet processing method to process ZK61m magnesium alloy sheet in this experiment. During repeated drawing-pressing deformation, the central area of the plate was subjected to annular tensile and compressive stress. In the process of deformation under unidirectional force, the slip direction of some grains is in hard orientation and it is difficult for the slip to operate, while the annular tensile and compressive stress state will provide the grains with multidirectional slipping options. Electron back-scattered diffraction (EBSD) technique was used to analyze the microstructure of magnesium alloy plates with different drawing-pressing times and different positions from local deformation center to edge. In this study, the complex circumferential force environment will weaken the anisotropy of deformation structure during repeated drawing-pressing, and the effect of prefabricated twins is more obvious. Based on the modified generalized Schmid factor (GSF) analysis, it is easier to show a variety of twin variation behaviors within a grain during Erichsen deformation. After the plate is deformed by Erichsen processing, the mechanical properties of magnesium alloy sheet have also been effectively improved.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Stiff, strong and ductile heterostructured aluminum composites reinforced with oriented nanoplatelets10.1016/j.scriptamat.2020.08.017 ↗
2. Enhancement of the mechanical properties of textured AZ31 Mg alloy sheets by bimodal-orientation microstructure: basal orientation and RD-texture10.1016/j.msea.2022.144472 ↗
3. Revealing the ultra-high high-temperature compressive mechanical properties and deformation mechanism of a heterostructured AlNp/Al nanocomposite10.1016/j.msea.2023.145199 ↗
4. A comprehensive study on the mechanical behavior, deformation mechanism and texture evolution of Mg alloys with multi texture components10.1016/j.jallcom.2022.164342 ↗
5. Developing a low-alloyed fine-grained Mg alloy with high strength-ductility based on dislocation evolution and grain boundary segregation10.1016/j.scriptamat.2021.114414 ↗
6. Recent advances in catalyst-modified Mg-based hydrogen storage materials10.1016/j.jmst.2023.03.063 ↗
7. Nanostructured light metal hydride: fabrication strategies and hydrogen storage performance10.1016/j.rser.2023.113560 ↗
8. Understanding the mechanisms of texture evolution in an Mg-2Zn-1Ca alloy during cold rolling and annealing10.1016/j.ijplas.2022.103412 ↗
9. Reducing mechanical anisotropy by formation of symmetrical ring-like texture via final-pass heavy reduction rolling in Mg alloy10.1016/j.jmrt.2023.04.062 ↗
10. Twinning, dynamic recrystallization, and texture evolution in as-solution AZ80 Mg alloy during hot compression10.1016/j.jmrt.2023.07.004 ↗
11. A correlation between texture evolution and dislocation density in Al-Mg alloys during uniaxial tensile deformation10.1016/j.matlet.2023.134829 ↗
12. Effect of deformation methods on microstructure, texture, and properties of a Cu–Mg alloy10.1016/j.msea.2023.145126 ↗
13. Effects of deformation twins on microstructure evolution, mechanical properties and corrosion behaviors in magnesium alloys - a review10.1016/j.jma.2022.09.003 ↗
14. Deformation failure behavior and fracture model of twin-roll casting AZ31 alloy under multiaxial stress state10.1016/j.jmrt.2022.01.067 ↗
15. Achieving texture randomization and yield anisotropy reduction in rolled Mg-Zn-Y-Zr alloy by multidirectional impact forging10.1016/j.matchar.2022.112540 ↗
16. Microstructure, texture evolution and mechanical properties of a large-scale multidirectionally forged Mg-Gd-Y-Zn-Zr-Ag alloy10.1016/j.jmrt.2023.04.076 ↗
17. Grain refinement mechanism in 6082 Al alloy fabricated by cryo-multiaxial forging10.1016/j.msea.2021.142518 ↗
18. Microstructure evolution and mechanical properties of cup-shaped specimens prepared by rotary backward extrusion10.1016/j.jmrt.2023.01.029 ↗
19. Novel RE-texture component and bimodal microstructure formation during post-annealing of an accumulative back extruded WE43 alloy10.1016/j.matlet.2023.134006 ↗
20. Microstructure and enhanced cryogenic tensile property of a heterostructured Al–AlN/Al–Mg composite fabricated by accumulative roll bonding (ARB)10.1016/j.jmrt.2022.09.037 ↗
21. The microstructure and texture evolution of Mg-5Sn-1Si-0.8Y alloy during the reciprocating extrusion process (REP)10.1016/j.jallcom.2023.168845 ↗
22. Comparison of the effect of ECAP and SSE on microstructure, texture, and mechanical properties of magnesium10.1016/j.jallcom.2022.164407 ↗
23. Uncovering of the formation of rare earth texture and pseudo fiber bimodal microstructure in the high ductility Mg-2Gd-0.4Zr alloy during extrusion
24. Deformation mechanisms of dual-textured Mg-6.5Zn alloy with limited tension-compression yield asymmetry10.1016/j.actamat.2023.118766 ↗
25. Deformation mechanisms and differential work hardening behavior of AZ31 magnesium alloy during biaxial deformation10.1016/j.jma.2020.09.022 ↗
26. Plastic deformation behavior of a Mg-1.5Zn-0.1Ca (mass%) alloy sheet under different strain paths10.1016/j.msea.2023.144772 ↗
27. Research on microstructure evolution and deformation behaviors of AZ31 Mg alloy sheets processed by a new severe plastic deformation with different temperatures
28. Plastic deformation mechanism and hardening mechanism of rolled rare-Earth magnesium alloy thin sheet10.1016/j.matdes.2022.110678 ↗
29. An effective rolling process of magnesium alloys for suppressing edge cracks: width-limited rolling10.1016/j.jma.2021.01.007 ↗
30. Achieving higher dynamic mechanical response by adjusting texture through twinning in a ZK61 Mg alloy10.1016/j.jallcom.2022.163755 ↗
31. Crystal plasticity FEM study of twinning and slip in a Mg single crystal by Erichsen test10.1016/j.actamat.2018.06.042 ↗
32. Effect of deformation temperature on the slip activity in pure Mg and AZX21110.1016/j.jmrt.2022.06.050 ↗
33. Enhanced superplasticity achieved by disclination-dislocation reactions in a fine-grained low-alloyed magnesium system10.1016/j.ijplas.2022.103300 ↗
34. An effective Schmid factor in consideration of combined normal and shear stresses for slip/twin variant selection of Mg-3Al-1Zn alloy10.1016/j.scriptamat.2019.03.026 ↗
35. Calculation of Schmid factor in Mg alloys: influence of stress state10.1016/j.scriptamat.2019.06.014 ↗
36. {101¯2} twinning behavior under biaxial tension of Mg–3Al–1Zn plate10.1016/j.ijplas.2020.102754 ↗
37. Evolution of twinning and shear bands in magnesium alloys during rolling at room and cryogenic temperature10.1016/j.matdes.2020.108793 ↗
38. Effect of loading path on grain misorientation and geometrically necessary dislocation density in polycrystalline aluminum under reciprocating shear10.1016/j.commatsci.2022.111221 ↗
39. Dislocation structures after creep in an Al-3.85%Mg alloy studied using EBSD-KAM technique10.1016/j.matlet.2023.133978 ↗
40. {10–12} Extension twinning activity and compression behavior of pure Mg and Mg-0.5Ca alloy at cryogenic temperature10.1016/j.msea.2021.142189 ↗
41. Appearance of textures with a c-axis parallel to the extrusion direction in Mg alloys10.1016/j.scriptamat.2021.114422 ↗
42. Insights into the effect of different thermomechanical processing on the microstructure, phases, texture and tensile properties in Mg-0.9Al-0.6Mn-0.2Si-0.1Ca alloy10.1016/j.intermet.2022.107564 ↗
43. Effect of texture on deformation behavior of heterogeneous Mg-13Gd alloy with strength–ductility synergy10.1016/j.jmst.2021.09.065 ↗
44. A three-dimensional mechanistic study of the drivers of classical twin nucleation and variant selection in Mg alloys: a mesoscale modelling and experimental study10.1016/j.ijplas.2021.103027 ↗
45. Distribution characteristics of in-grain misorientation axes in cold-rolled commercially pure titanium and their correlation with active slip modes10.1007/s11661-010-0410-4 ↗
46. Basal slip mediated tension twin variant selection in magnesium WE43 alloy10.1016/j.actamat.2019.03.018 ↗
47. Twinning and recrystallization behavior of AZ31 Mg-rolled sheets during the corrugated wide limit alignment process10.1016/j.msea.2021.141156 ↗