journal article·2023-12Open access

A comparative study of solute trapping in Fe-(33–45 at%) Cu alloys manufactured by laser directed energy deposition

Daniel Yin, Amit Misra

Abstract

The high cooling rates in laser directed energy deposition (DED-LB) of alloys lead to substantial amounts of solute trapping as solute atoms cannot diffuse away from the solid/liquid interface before it advances. In some concentrated alloys, this results in supersaturated solid phases that form nanoscale hierarchical microstructures when the solute atoms precipitate out during reheating from subsequent laser passes. We choose the Iron-Copper (Fe-Cu) binary alloy as model system as it is chemically homogeneous in the liquid phase and has negligible solid solubility at room temperature. Two alloys with nominal compositions in atomic (at.) %, Fe 67Cu 33 and Fe 55Cu 45 , were manufactured using DED-LB. Scanning transmission electron microscopy (STEM), energy dispersive spectroscopy (EDS) and wavelength dispersive spectroscopy (WDS) were used to characterize the nanostructures and heterogeneous chemical compositions. A non-equilibrium solute partitioning model was used to compute the supersaturated chemistries of the constituent phases and validated with experimentally measured compositions. The measured phase compositions of the two alloys were very similar, at roughly 12 at% Cu and 4 at% Fe in the α(bcc)-Fe and ε(fcc)-Cu phases respectively, despite having different processing parameters and mechanical behavior. This indicates that the total thermal history, that depends on both the processing parameters and laser scan pattern, plays a stronger role on the final microstructure evolution than just the initial quantity of trapped solute. Additionally, we find that current non-equilibrium solute partitioning models applied on the continuum scale fall short of predicting accurate quantitative phase compositions in concentrated alloys, although the qualitative trends are captured correctly.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: nanoparticles nucleation surface interactions · Additive Manufacturing Materials and Processes · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Turchanin, M., Agraval, P. Cu-Fe Binary Phase Diagram Evaluation, MSI Eureka, Effenberg, G. (Ed.) by MSI, Materials Science International Services GmbH, Stuttgart, 38, 20.11107.1.5 (2007) 〈https://doi.org/10.7121/msi-eureka-20.11107.1.5〉.10.7121/msi-eureka-20.11107.1.5 ↗
2. Liquid separation effects in Fe−Cu alloys solidified under different cooling rates10.1007/BF02654269 ↗
3. Solidification microstructure evolution and its corresponding mechanism of metastable immiscible Cu80Fe20 alloy with different cooling conditions10.1016/j.jallcom.2018.01.306 ↗
4. Microstructure evolution of undercooled iron-copper hypoperitectic alloy10.1016/S0921-5093(01)00928-5 ↗
5. Thermodynamics of liquid alloys, and stable and metastable phase equilibria in the copper-iron system10.1023/A:1013784901879 ↗
6. Phase separation and structure transition of undercooled Fe75Cu25 melts10.1080/00319104.2017.1327583 ↗
7. Hierarchical microstructures and deformation behavior of laser direct metal deposited Cu-Fe alloys10.1016/j.msea.2020.140659 ↗
8. Laser powder bed fusion of ultrahigh strength Fe-Cu alloys using elemental powders
9. Nano/ultrafine grained immiscible Fe-Cu alloy with ultrahigh strength produced by selective laser melting10.1080/21663831.2021.1884620 ↗
10. Solute transport and composition profile during direct metal deposition with coaxial powder injection10.1016/j.apsusc.2011.09.023 ↗
11. Numerical simulation of heat transfer and fluid flow in coaxial laser cladding process for direct metal deposition10.1063/1.2209807 ↗
12. Effect of beam profile on heat and mass transfer in filler powder laser welding10.1016/j.jmatprotec.2018.03.011 ↗
13. Development of powder distribution model of discontinuous coaxial powder stream in laser direct metal deposition10.1016/j.powtec.2018.09.032 ↗
14. Laser attenuation of the focused powder streams in coaxial laser cladding10.2351/1.521910 ↗
15. An analytical model of beam attenuation and powder heating during coaxial laser direct metal deposition10.1088/0022-3727/40/23/012 ↗
16. Modelling powder concentration distribution from a coaxial deposition nozzle for laser-based rapid tooling10.1115/1.1643748 ↗
17. A novel model of laser energy attenuation by powder particles for laser solid forming10.1016/j.ijmachtools.2019.103440 ↗
18. Modeling of non-equilibrium partitioning in direct metal deposited copper–iron concentrated alloys10.1557/s43578-022-00487-4 ↗
19. Model for solute redistribution during rapid solidification10.1063/1.329867 ↗
20. On the two-phase Stefan problem with interfacial energy and entropy10.1007/BF00251907 ↗
21. Theoretical analysis and model experiments on the formation mechanism of channel-type segregation10.2355/isijinternational1966.18.90 ↗
22. Seitz · 1940
23. NIST-JANAF themochemical tables
24. Powell, R.W., Ho, C.Y., Liley, P.E. Thermal Conductivity of Selected Materials, National Standard Reference Data Series – National Bureau of Standards – 8, West Lafayette, 13–35 (1966).10.6028/NBS.NSRDS.8 ↗
25. Model for nonequilibrium partitioning during rapid solidification of binary concentrated solutions10.1016/0956-7151(92)90174-D ↗
26. R. van-Engelen, Improving the Double Exponential Quadrature Tanh-Sinh, Sinh-Sinh and Exp-Sinh Formulas, https://www.genivia.com/qthsh.html, 2022 (accessed 14 September 2022).
27. Thermal processes of a powder particle in coaxial laser cladding10.1016/S0030-3992(02)00145-7 ↗
28. Numerical simulation of thermal behavior and multicomponent mass transfer in direct laser deposition of Co-base alloy on steel10.1016/j.ijheatmasstransfer.2016.08.049 ↗
29. Directed energy deposition process
30. Quantitative WDS compositional mapping using the electron microprobe10.2138/am-2021-7739 ↗
31. A comparative study of dendritic growth within undercooled liquid pure Fe and Fe50Cu50 alloy10.1016/j.actamat.2013.12.009 ↗
32. Specific heat capacity and dendritic growth kinetics of liquid peritectic Fe-Cu alloys10.1016/j.cplett.2016.06.059 ↗
33. Rapid dendrite growth in undercooled alloys10.1016/0001-6160(87)90174-X ↗
34. Dendritic growth10.1179/imr.1994.39.2.49 ↗
35. A numerical analysis of dendritic and cellular array growth: the spacing adjustment mechanisms10.1016/0022-0248(92)90006-5 ↗
36. Rapid phase transformation under local non-equilibrium diffusion conditions10.1179/1743284715Y.0000000051 ↗
37. Non-equilibrium solute partitioning in a laser re-melted Al–Li–Cu alloy10.1016/j.actamat.2013.08.050 ↗
38. Phase selections and mechanical properties of ternary Cr-Nb-Ti alloys under rapid solidification10.1016/j.jallcom.2016.05.207 ↗
39. On the primary spacing and microsegregation of cellular dendrites in laser deposited Ni–Nb alloys10.1088/1361-651X/aa7369 ↗