journal article·2023-12

Influence of Ni doping on the thermoelectric properties of Bi2S3 via high pressure and high temperature

Wenting Ji, Haidong Yu, Xinjian Li, Dayi Zhou, Xin Fan, Yuewen Zhang, Hongan Ma, Xiaopeng Jia

Publisher page

Abstract

Bi 2S 3 -based materials without containing expensive, toxic, and rare components are considered more attractive for the realization of large-scale practical applications. Under this perspective, in this work, nickel was employed to enhance the thermoelectric properties of polycrystalline Bi 2S 3 , which was fabricated by using the mechanical alloying (MA) method combined with the high pressure and high temperature (HPHT) technology. By increasing the Ni doping content, the electrical conductivity was significantly enhanced, whereas the absolute value of the Seebeck coefficient was gradually reduced, which was mainly derived from the increased carrier concentration. Moreover, numerous lattice and distortions were introduced in the stucture of the Bi 2S 3 samples that were synthesized by the HPHT technology. At the same time, Ni doping contributed to the strong impedance for phonon propagation and suppressed thermal conductivity. As a consequence, a peak zT value of 0.23 at 543 K was achieved in the Ni 0.005Bi 2S 3 sample, being about three times than that of pure Bi 2S 3.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. New and old concepts in thermoelectric materials10.1002/anie.200900598 ↗
2. Complex thermoelectric materials10.1038/nmat2090 ↗
3. Fiber-based thermoelectrics for solid, portable, and wearable electronics10.1039/D0EE03520C ↗
4. Seeking new, highly effective thermoelectrics10.1126/science.aaz9426 ↗
5. Band engineering of thermoelectric materials10.1002/adma.201202919 ↗
6. High-performance in n-type PbTe-based thermoelectric materials achieved by synergistically dynamic doping and energy filtering10.1016/j.nanoen.2021.106706 ↗
7. Power factor enhancement by modulation doping in bulk nanocomposites10.1021/nl201206d ↗
8. Recent advances in thermoelectric materials10.1016/j.pmatsci.2016.07.002 ↗
9. High-performance bulk thermoelectrics with all-scale hierarchical architectures10.1038/nature11439 ↗
10. Point defect engineering of high-performance bismuth-telluride-based thermoelectric materials10.1002/adfm.201400474 ↗
11. Evolution of thermoelectric properties and anisotropic features of Bi­­2Te3 prepared by high pressure and high temperature10.1016/j.jallcom.2015.01.271 ↗
12. Highly textured Bi2Te3-based materials for thermoelectric energy conversion10.1063/1.2743816 ↗
13. Extraordinary n-Type Mg3SbBi thermoelectrics enabled by yttrium doping
14. Thermoelectric properties and microstructure of Mg3Sb210.1016/j.jssc.2006.01.034 ↗
15. Extraordinary thermoelectric performance in n-type manganese doped Mg3Sb2 Zintl: High band degeneracy, tuned carrier scattering mechanism and hierarchical microstructure10.1016/j.nanoen.2018.07.059 ↗
16. High thermoelectric performance of MgAgSb-based materials10.1016/j.nanoen.2014.04.012 ↗
17. Extraordinary thermoelectric performance in MgAgSb alloy with ultralow thermal conductivity10.1016/j.nanoen.2019.02.045 ↗
18. Non-equilibrium processing leads to record high thermoelectric figure of merit in PbTe-SrTe10.1038/ncomms12167 ↗
19. Enhancing thermoelectric performance of n-type PbTe through separately optimizing phonon and charge transport properties10.1016/j.jallcom.2020.154377 ↗
20. Realizing high thermoelectric performance in GeTe through decreasing the phase transition temperature via entropy engineering10.1039/C9TA10963C ↗
21. Medium-temperature thermoelectric GeTe: vacancy suppression and band structure engineering leading to high performance10.1039/C9EE00317G ↗
22. Enhanced thermoelectric performance of hydrothermally synthesized polycrystalline Te-doped SnSe10.1016/j.cclet.2020.04.046 ↗
23. Enhanced thermoelectric performance of p-type SnSe doped with Zn10.1016/j.scriptamat.2016.08.009 ↗
24. Facile synthesis of nanostructured n-type SiGe alloys with enhanced thermoelectric performance using rapid solidification employing melt spinning followed by spark plasma sintering10.1016/j.cap.2018.09.013 ↗
25. Enhanced thermoelectric figure-of-merit in spark plasma sintered nanostructured n-type SiGe alloys10.1063/1.4768297 ↗
26. High temperature Si-Ge alloy towards thermoelectric applications: A comprehensive review
27. Low-cost, abundant binary sulfides as promising thermoelectric materials10.1016/j.mattod.2015.10.004 ↗
28. Fabrication and properties of Bi2S3−xSex thermoelectric polycrystals10.1016/j.ssc.2013.03.013 ↗
29. Thermoelectric properties of n-type CuxBi2S3 materials fabricated by plasma activated sintering10.1016/j.jallcom.2018.11.343 ↗
30. Bi2S3 nanonetwork as precursor for improved thermoelectric performance10.1016/j.nanoen.2013.12.015 ↗
31. Enhanced thermoelectric properties of bismuth sulfide polycrystals prepared by mechanical alloying and spark plasma sintering10.1016/j.jssc.2008.08.022 ↗
32. High thermoelectric properties realized in earth-abundant Bi2S3 bulk via carrier modulation and multi-nano-precipitates synergy10.1016/j.nanoen.2020.105227 ↗
33. Enhancing the thermoelectric performance of CexBi2S3 by optimizing the carrier concentration combined with band engineering10.1039/C7TC04082B ↗
34. Thermoelectric properties of Ag-doped bismuth sulfide polycrystals prepared by mechanical alloying and spark plasma sintering10.1016/j.matchemphys.2011.09.010 ↗
35. Simultaneous enhanced performance of electrical conductivity and Seebeck coefficient in Bi2−xSnxS3 by solvothermal and microwave sintering10.1016/j.jallcom.2017.05.067 ↗
36. Highly enhanced thermoelectric properties of nanostructured Bi2S3 bulk materials via carrier modification and multi-scale phonon scattering10.1039/C9QI00213H ↗
37. Bi0.33(Bi6S9)Br compositing in Bi2S3 bulk materials forwards high thermoelectric properties10.1039/D2CP02805K ↗
38. Ultra-thin NiFeSe nanosheets as a highly efficient bifunctional electrocatalyst for overall water splitting10.1039/C9SE00905A ↗
39. Enhancement of thermoelectric properties in cold pressed nickel doped bismuth sulfide compounds10.1007/s13391-018-0072-8 ↗
40. Fabrication and properties of Bi2−xAg3xS3 thermoelectric polycrystals10.1016/j.jallcom.2011.11.072 ↗
41. Highly enhanced thermoelectric properties of Bi/Bi2S3 nanocomposites10.1021/acsami.6b14803 ↗
42. Temperature gradient cooling technique: Boosting high power factor of Bi2S3+x thermoelectric material10.1016/j.jallcom.2020.154451 ↗
43. Characterization of Lorenz number with Seebeck coefficient measurement10.1063/1.4908244 ↗
44. Preparation of novel titanium-niobium-oxygen composite ceramic with excellent thermoelectric properties using the high-pressure and high-temperature method10.1016/j.jeurceramsoc.2022.05.016 ↗