journal article·2023-10

The effect of Cu additions and prestraining on the age-hardening behavior of AA6016 sheets

Min Cui, Sung Hwan Lim, Hyoung-Wook Kim, Je-Hyun Lee

Publisher page

Abstract

In this study, we investigated the effect of Cu additions (0.1 and 0.3 wt%) on the age-hardening behavior of AA6016 Al–Mg–Si alloys with and without 3 % prestraining by hardness testing and transmission electron microscopy analysis. Our results showed that higher Cu addition slightly increased the peak hardness, but significantly shortened the time to reach peak aging in both alloys with and without prestraining. Prestraining can improve the peak hardness by making the higher Cu addition more pronounced. In alloys without prestraining, the higher Cu addition slowed the hardness reduction in the overaged state, and the 0.3Cu alloy consistently exhibited finer precipitates with higher number density than the 0.1Cu alloy throughout the aging process. In contrast, higher Cu addition in alloys with 3 % prestraining accelerated the hardness decrease in the overaged state and led to a coarser microstructure after 24 h aging. This is primarily because Cu atoms can slow down the reduction in dislocation density during aging, whereas the higher dislocation density promoted the growth of precipitates, resulting in accelerated coarsening of precipitates as the aging time proceeded. Moreover, dislocations accelerated the formation of precursors of the Q′ phase, which was more pronounced in the 0.3Cu alloy.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Atomic structures of precipitates in Al–Mg–Si alloys with small additions of other elements10.1002/adem.201800125 ↗
2. Al-Mg-Si sheet alloys for autobody applications
3. The influence of Cu addition and pre-straining on the natural aging and bake hardening response of Al-Mg-Si alloys10.1016/j.jallcom.2016.07.066 ↗
4. The effect of Cu additions on the precipitation kinetics in an Al-Mg-Si alloy with excess Si10.1007/s11661-001-0254-z ↗
5. Effect of Sn and Cu addition on the precipitation and hardening behaviour of Al-1.0Mg-0.6Si alloy10.1016/j.msea.2019.138515 ↗
6. Effects of Zn addition on the age hardening behaviour and precipitation evolution of an Al-Mg-Si-Cu alloy10.1016/j.matchar.2018.08.051 ↗
7. Effects of Cu and Ag additions on age-hardening behavior during multi-step aging in Al-Mg-Si alloys10.1016/j.msea.2012.09.051 ↗
8. Comparative and complementary characterization of precipitate microstructures in Al-Mg-Si(-Li) alloys by transmission electron microscopy, energy dispersive X-ray spectroscopy and atom probe tomography10.1016/j.jallcom.2014.10.199 ↗
9. The natural aging and precipitation hardening behaviour of Al-Mg-Si-Cu alloys with different Mg/Si ratios and Cu additions10.1016/j.msea.2014.12.086 ↗
10. The effects of Cu addition on the microstructure and thermal stability of an Al-Mg-Si alloy10.1016/j.jallcom.2006.07.113 ↗
11. The precipitation sequence in Al-Mg-Si alloys10.1016/S1359-6454(98)00059-7 ↗
12. 3D atom probe study of solute atoms clustering during natural ageing and pre-ageing of an Al-Mg-Si alloy10.1080/09500830600643270 ↗
13. Atomic model for GP-zones in a 6082 Al–Mg–Si system10.1016/S1359-6454(00)00302-5 ↗
14. The crystal structure of the β" phase in Al-Mg-Si alloys10.1016/S1359-6454(97)00493-X ↗
15. The diffraction patterns from β″ precipitates in 12 orientations in Al–Mg–Si alloy10.1016/j.scriptamat.2010.01.039 ↗
16. The crystal structure of the β′ phase in Al–Mg–Si alloys10.1016/j.actamat.2007.02.032 ↗
17. Precipitation sequence of various kinds of metastable phases in Al-1.0mass%Mg2Si-0.4mass% Si alloy10.1023/A:1004769305736 ↗
18. Bonding in MgSi and Al-Mg-Si compounds relevant to Al-Mg-Si alloys10.1103/PhysRevB.67.224106 ↗
19. Crystal structure of the orthorhombic U2-Al4Mg4Si4 precipitate in the Al-Mg-Si alloy system and its relation to the β′ and β″ phases10.1016/j.msea.2004.09.019 ↗
20. The structural and compositional evolution of precipitates in Al-Mg-Si-Cu alloy10.1016/j.actamat.2017.12.036 ↗
21. The effect of Cu on precipitation in Al-Mg-Si alloys10.1080/14786430701287377 ↗
22. Phase relations and precipitation in Al–Mg–Si alloys with Cu additions10.1016/S0079-6425(03)00031-8 ↗
23. Study of intergrown L and Q′ precipitates in Al–Mg–Si–Cu alloys.10.1016/j.scriptamat.2011.01.008 ↗
24. Study of precipitation in Al–Mg–Si Alloys by atom probe tomography II. Influence of Cu additions10.1016/j.actamat.2015.08.018 ↗
25. Precipitation hardening in aluminum Alloy 602210.1016/S1359-6462(99)00046-9 ↗
26. The effect of low Cu additions on precipitate crystal structures in overaged Al-Mg-Si(-Cu) alloys10.1016/j.matchar.2019.110087 ↗
27. Effect of natural ageing and pre-straining on the hardening behaviour and microstructural response during artificial ageing of an Al-Mg-Si-Cu alloy10.1016/j.matdes.2016.01.119 ↗
28. Structures and formation mechanisms of dislocation-induced precipitates in relation to the age-hardening responses of Al-Mg-Si alloys10.1016/j.jmst.2019.11.001 ↗
29. The effect of low Cu additions and predeformation on the precipitation in a 6060 Al-Mg-Si alloy10.1007/s11661-013-1754-3 ↗
30. Mechanisms controlling the artificial aging of Al–Mg–Si alloys10.1016/j.actamat.2011.02.010 ↗
31. Effect of natural ageing or pre-ageing on the evolution of precipitate structure and strength during age hardening of Al-Mg-Si alloy AA 601610.1016/j.msea.2019.05.073 ↗
32. The morphology and orientation relationship variations of Q′ phase in Al-Mg-Si-Cu alloy10.1016/j.matchar.2016.06.005 ↗
33. Applying precipitate–host lattice coherency for compositional determination of precipitates in Al-Mg-Si-Cu alloys10.1080/14786435.2012.693214 ↗
34. Effects of Cu additions on the precipitation activation energy and mechanical properties of prestrained Al-Mg-Si alloys10.1016/j.jmrt.2022.08.037 ↗
35. Modeling of the age-hardening behaviour of Al-Mg-Si alloys10.1016/S1359-6454(00)00301-3 ↗
36. Cu atoms suppress misfit dislocations at the β″/Al interface in Al-Mg-Si alloys10.1016/j.scriptamat.2015.07.033 ↗
37. Special segregation of Cu on the habit plane of lath-like β′ and QP2 precipitates in Al-Mg-Si-Cu alloys10.1016/j.scriptamat.2018.03.032 ↗
38. Cu-segregation at the Q′/α interface in Al-Mg-Si-Cu alloy10.1016/S1359-6462(02)00325-1 ↗
39. First-principles impurity diffusion coefficients10.1016/j.actamat.2009.05.006 ↗
40. D.A. Porter, K.E. Easterling. Phase transformations in metals and alloys, second ed., Diffusional Transformations in Solids, (1993) 265–275.10.1007/978-1-4899-3051-4 ↗
41. Quantitative Size-Factors for metallic solid solutions10.1007/BF00549722 ↗
42. Dislocation structures and their relationship to strength in deformed nickel microcrystals10.1016/j.actamat.2008.02.046 ↗
43. Mechanisms for improving tensile properties at elevated temperature in fire-resistant steel with Mo and Nb10.1016/j.matdes.2020.108882 ↗
44. Modelling mechanical properties for non-hardenable aluminum alloys10.1016/j.commatsci.2007.03.013 ↗