journal article·2023-08

Transformation of borides in directionally solidified nickel base superalloy and its mechanical response

Richa Gupta, Sanjit Bhowmick, K.C. Hari Kumar, M.J.N.V. Prasad, Prita Pant

Publisher page

Abstract

Directionally solidified (DS) GTD444 is a boron-modified nickel base superalloy which is used in later stage tubine blades. Boron is added as a grain boundary strengthener and it modifies the grain boundary microchemistry. During service, the blades undergo thermal exposure that could lead to further changes in the grain boundary chemistry. This is known to influence the grain boundary strength and affects the overall mechanical response of the superalloys. In the present study high resolution characterization has been carried out to investigate the evolution of grain boundary precipitates in DS GTD444 alloy under thermal aging at 900 ºC. In addition, in situ picoindentation and high-temperature tensile tests were performed to determine the effect of changes in microstructure on the mechanical properties. Atom probe tomography, in conjunction with electron microscopy, shows that nano-sized borides present along grain boundaries in the as-received DS blades completely transform into carbides after aging. These carbides are of two types: M 23C 6, and M 6C. These carbides are present discretely along the grain boundary. The evolved microstructure after 320 h of aging shows higher transverse ductility as compared to the as-received DS blades, and the failure in all tested samples was transgranular. This suggests that the presence of discrete precipitates (borides or carbides) along the DS boundaries strengthens the grain boundaries.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Materials Characterization Techniques · High Temperature Alloys and Creep · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Atomic-scale APFIM and TEM investigation of grain boundary microchemistry in astroloy nickel base superalloys10.1016/S1359-6454(96)00087-0 ↗
2. Grain boundary segregation in nickel base superalloys Astroloy: an atom-probe study10.1016/0169-4332(93)90330-E ↗
3. The effect of grain boundary segregation boron in cast alloy 718 on HAZ-SIMS analysis
4. Grain boundary segregation of boron in INCONEL 71810.1007/s11661-998-0020-6 ↗
5. Superlattice stacking fault formation and twinning during creep in γ/γ′ single crystal superalloy CMSX-410.1016/S0921-5093(02)00172-7 ↗
6. Effects of minor additions on microstructure and creep performance of RR2086 SX superalloys10.1023/B:JMSC.0000047543.64750.83 ↗
7. The microstructures of base/modified RR2072 SX superalloys and their effects on creep properties at elevated temperatures10.1016/S1359-6454(01)00410-4 ↗
8. Microstructure of carbides at grain boundaries in nickel based superalloys10.1016/S1005-0302(12)60169-8 ↗
9. Microstructural evolution of a Ni-based superalloy (617B) at 700 °C studied by electron microscopy and atom probe tomography10.1016/j.actamat.2011.11.020 ↗
10. The grain boundary microstructures of the base and modified RR 2072 bicrystal superalloys and their effects on the creep properties10.1016/S0921-5093(04)00905-0 ↗
11. Effect of boron additions on the microstructure and transverse properties of a directionally solidified superalloy10.1016/j.msea.2007.05.082 ↗
12. On the effect of boron on grain boundary character in a new polycrystalline superalloy10.1016/j.actamat.2015.10.006 ↗
13. On the role of boron on improving ductility in a new polycrystalline superalloy10.1016/j.actamat.2016.11.009 ↗
14. Effect of boron addition on the microstructure and mechanical properties of K4750 nickel-based superalloy10.1016/j.jmst.2020.02.079 ↗
15. Cr-rich nanosize precipitates in a standard heat-treated Inconel 738 superalloy10.1080/14786430903270643 ↗
16. Precipitation and degeneration of grain- boundary Cr7C3 and M4B3 in Ni-Cr-AI-Ti nickel-base superalloys10.1007/BF01165947 ↗
17. Precipitation and evolution of grain boundary boride in a nickel-based superalloy during thermal exposure10.1016/j.matchar.2017.03.038 ↗
18. TEM analysis of Cr-Mo-W-B phase in a DS nickel based superalloy10.1007/s10853-008-2886-5 ↗
19. G.K. Bouse, J.C. Schaeffer, M.F. Henry, Optimizing S.C. René N4 alloy for DS aft-stage bucket applications in industrial gas turbines, Proc. Int. Symp. Superalloys. (2008) 99–108. https://doi.org/10.7449/2008/superalloys_2008_99_108.10.7449/2008/Superalloys_2008_99_108 ↗
20. Rene’ N4: A first generation single crystal turbine airfoil with improved oxidation resistance, low angle boundary strength and superior long time rupture strength
21. Compositionally graded nano-sized borides in a directionally solidified nickel-base superalloy10.1016/j.scriptamat.2021.113981 ↗
22. Fretting wear behaviour of machined layer of nickel-based superalloy produced by creep-feed profile grinding10.1016/j.cja.2021.10.007 ↗
23. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
24. Orientation and temperature dependence of Some mechanical properties of the single-crystal nickel-base superalloy Rene N4: Part III. tension-compression anisotropy10.1007/BF02643957 ↗
25. P. Kontis, H.A. Mohd Yusof, K.L. Moore, C.R.M. Grovenor, R.C. Reed, On the effect of boron on the mechanical properties of a new polycrystalline superalloy, MATEC Web Conf. 14 (2014). https://doi.org/10.1051/matecconf/20141417003.10.1051/matecconf/20141417003 ↗
26. Analysis of carbide transformation in MC-M23C6 and its effect on mechanical properties of Ni-based superalloy10.1016/j.jallcom.2022.164959 ↗
27. Comparison of nanoindentation results obtained with Berkovich and cube-corner indenters10.1080/14786430600746424 ↗
28. Computational search for novel hard chromium-based materials10.1021/acs.jpclett.6b02821 ↗
29. First principles investigation of binary chromium carbides Cr7C3, Cr3C2 and Cr23C6: electronic structures, mechanical properties and thermodynamic properties under pressure
30. G. Bai, J. Li, R. Hu, T. Zhang, H. Kou, H. Fu, Effect of thermal exposure on the stability of carbides in Ni-Cr-W based superalloy, 528 (2011) 2339–2344. https://doi.org/10.1016/j.msea.2010.11.088.10.1016/j.msea.2010.11.088 ↗
31. Quantitative precipitate classification and grain boundary property control in Co/Ni-Base superalloys10.1007/s11661-021-06156-1 ↗
32. R.C. Reed, The Superalloys Fundamentals and Applications, First edi, Cambridge University Press, 2006.10.1017/CBO9780511541285 ↗
33. The Thermo-Calc databank system10.1016/0364-5916(85)90021-5 ↗
34. Mechanism of primary MC carbide decomposition in Ni-base superalloys10.1007/s11661-004-0076-x ↗
35. Relative stability of carbide and intermetallic phases in nickel-base superalloys
36. Effects of long-term thermal exposure on the microstructure and properties of a cast Ni-base superalloy10.1007/s11661-007-9381-5 ↗
37. Precipitation behavior and mechanical properties of IN617 superalloy during operating at 850 C10.1016/j.ijpvp.2022.104674 ↗
38. On the grain boundary strengthening effect of boron in g / g 0Cobalt-base superalloys10.1016/j.actamat.2017.12.020 ↗
39. A Microstructural and creep properties of boron- and zirconium-containing cobalt-based superalloys10.1016/j.msea.2016.10.124 ↗