Experimental investigation and thermodynamic description of the Fe–Hf–Nb system
Source abstract
Abstract
According to solidification microstructure of as-cast alloys and phase constituents of annealed samples, the liquidus surface projection and phase relationships at 1373 and 1273 K in the Fe–Hf–Nb system were constructed. A ternary phase τ with AlCuHf-structure was found, and the composition ranges of Nb in τ at 1373 and 1273 K were ∼ 20.5–30.8 at.% and ∼ 20.8–30.2 at.%, respectively. Moreover, the maximum solubilities of Nb in FeHf 2 was determined to be ∼ 16.9 at.% and ∼ 16.0 at.% at 1373 and 1273 K, and the maximum solubilities of Hf in μ was measured to be ∼ 4.6 at% and ∼ 3.3 at.% at 1373 and 1273 K. Fe 2Hf and Fe 2 Nb with the same C14 structure formed a homogeneous solid solution from Fe 2Hf to Fe 2 Nb at 1373 and 1273 K. Seven primary solidification regions in the liquidus surface projection and two three-phase regions and seven two-phase regions in the isothermal sections at 1373 and 1273 K were experimentally determined. On the basis of experimental data, the thermodynamic parameters of individual phases in the Fe–Hf–Nb system were optimized by CALculation of PHAse Diagram (CALPHAD) method. Four solution phases (liquid, bcc, fcc, and hcp) were described as the substitutional solution. The intermetallic phases FeHf 2, λ 1, λ 2, λ 3 and τ were modeled as (Fe) 1(Hf,Nb) 2, (Fe,Hf,Nb) 2(Fe,Hf,Nb) 1, (Fe) 2(Hf) 1, (Fe) 2(Hf,Nb) 1, and (Fe,Hf,Nb) 1(Fe,Hf,Nb) 1 by a two-sublattice model, respectively. μ was described as (Fe,Hf,Nb) 1(Hf,Nb) 4(Fe,Hf,Nb) 2(Fe,Hf,Nb) 6 by a four-sublattice model. A set of self-consistent thermodynamic parameters of the Fe–Hf–Nb system was obtained.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Some studies on hot corrosion performance of plasma sprayed coatings on a Fe-based superalloy10.1016/j.surfcoat.2004.03.030 ↗
2. High temperature corrosion be haviour of some Fe-, Co- and Ni-base superalloys in the presence of Y2O3 as inhibitor10.1016/j.apsusc.2009.03.040 ↗
3. Effect of aluminide particle distribution on the high temperature crack growth characteristics of a Co–Ni–Fe superalloy10.1016/S1359-6462(97)00208-X ↗
4. Temperature dependence of deformation mechanisms and tensile strength of a new Ni–Fe-base superalloy10.1016/j.matchar.2018.05.032 ↗
5. Design and development of Ti–Zr–Hf–Nb–Ta–Mo high-entropy alloys for metallic biomaterials10.1016/j.matdes.2021.109548 ↗
6. Calculated structural, electronic and elastic properties of M2GeC (M= Ti, V, Cr, Zr, Nb, Mo, Hf, Ta and W)10.1007/s00339-009-5106-5 ↗
7. Partition behavior of alloying elements and phase transformation temperatures in Co–Al–W-base quaternary systems10.1016/j.intermet.2012.07.033 ↗
8. A study of the microstructures and oxidation of Nb–Si–Cr–Al–Mo in situ composites alloyed with Ti, Hf and Sn10.1016/j.intermet.2006.08.016 ↗
9. Effect of ternary alloying elements addition on atomic ordering characteristics of Fe–Al intermetallics10.1016/S1359-6454(99)00087-7 ↗
10. Isothermal section at 1100 °C of the Fe–Ni–Ta system10.1016/j.jallcom.2010.05.084 ↗
11. Phase equilibria in ternary alloys based on iron-group metals and containing refractory metals (Mo, W, Nb, Ta)10.1016/0022-5088(88)90347-5 ↗
12. Experimental investigation and thermodynamic calculation of the phase equilibria in the Cu–Fe–Ta system10.1007/s11669-014-0349-z ↗
13. Phase equilibria in the ternary systems tantalum–iron–boron and tantalum–nickel–boron10.1007/BF00793862 ↗
14. Mechanical properties and microstructures of new Ti–Fe–Ta and Ti–Fe–Ta–Zr system alloys10.1016/j.msec.2005.04.004 ↗
15. Thermodynamic modeling of the Fe–Ti–V system10.1016/j.calphad.2012.06.010 ↗
16. Experimental investigation of phase equilibria in the Ti–Fe–Cr ternary system10.1016/j.calphad.2017.05.006 ↗
17. Thermodynamic assessment of the Cu–Fe–Ni system10.1016/S0364-5916(01)00032-3 ↗
18. Precipitation behavior and its effect on strengthening of an HSLA-Nb/Ti steel10.1007/s11661-001-0142-6 ↗
19. Martensitic/ferritic super heat-resistant 650 °C steels-design and testing of model alloys10.2355/isijinternational.42.1505 ↗
20. Microstructures of isothermally transformed Fe–Nb–C alloys10.1179/030634584790419791 ↗
21. A small-angle neutron scattering study of fine-scale NbC precipitation kinetics in the α-Fe–Nb–C system10.1107/S002188980601301X ↗
22. Investigation of the iron-rich corner of the Fe–Hf–Zr system10.1007/BF02648490 ↗
23. High-temperature grain size stabilization of nanocrystalline Fe–Cr alloys with Hf additions10.1016/j.msea.2014.06.099 ↗
24. Calculation of phase diagrams: Calphad10.1016/S1359-0286(96)80025-8 ↗
25. The equilibrium diagram of iron–hafnium
26. Laves phases in hafnium alloys with Group IV transition metals
27. L. Kaufman, H. Bernstein, Computer Calculations of Phase Diagrams, Academic Press, New York, 1970.
28. Thermodynamic assessment of the Fe–Hf binary system10.1016/j.jallcom.2007.02.036 ↗
29. Liquidus-solidus relations in iron-rich iron–niobium and iron molybdenum alloys
30. A thermodynamic evaluation of the Fe–Nb system
31. The Iron−Niobium phase diagram
32. The Fe−Nb (Iron–Niobium) system10.1007/BF02869000 ↗
33. Fe–Nb10.1361/105497102770332397 ↗
34. Thermodynamic assessment of Fe3Mn3Nb3N and Nb3C3N systems10.1016/j.calphad.2012.11.001 ↗
35. Cohesion in metals: transition metal alloys
36. Phase stability of the Hf–Nb system: from first-principles to CALPHAD10.1016/S0364-5916(02)80003-7 ↗
37. Experimental determination of phase equilibria in the Ni–Hf–Ta system at 950 °C and 1100 °C10.1007/s11661-021-06495-z ↗
38. Experimental investigation of phase equilibria in the Co−Hf−Mo system at 1373 and 1223 K10.1016/j.jallcom.2021.162655 ↗
39. Experimental determination of isothermal sections of the Hf–Nb–Ni system at 950 and 1100° C10.1515/ijmr-2021-8389 ↗
40. Experimental investigation and thermodynamic description of the Ni–Ta–W system10.1016/j.calphad.2021.102381 ↗
41. Experimental investigation of phase equilibria in the Fe–Nb–Ta System10.1007/s11669-018-0658-8 ↗
42. A.T. Dinsdale, SGTE pure elements (unary) database, version 4.5 2006.
43. Algebraic representation of thermodynamic properties and the classification of solutions10.1021/ie50458a036 ↗
44. Specific heat of the Hf2Fe, Hf2Co, and Hf2Rh intermetallic compounds10.1007/BF00349909 ↗