Phase evolution of ThMn12-type Sm-Fe-Co-Ga-Ti alloys with annealing treatment
Source abstract
Abstract
SmFe 12-based permanent magnet materials with ThMn 12 structure have received extensive attention in the exploration and development of new rare-earth-lean permanent magnets. However, the coercivity influence mechanism has not been clearly defined, hindering the development of high coercivity. In this work, the synergistic effect of Sm content and annealing process on phase formation and microstructure evolution has been investigated. The results demonstrate that the SmFe 12 hard magnetic phase can be obtained massively in ingots with x from 0.95 to 1.2, however, α-Fe can be completely eliminated only when x exceeds 1.0. Simultaneously, continuous grain boundary has been proposed by annealing at 1180 °C for 1 h in the Sm 1.1(Fe 0.8Co 0.2) 10.5Ga 0.5Ti alloy, accompanied by the purification of ThMn 12 -type phase. Elemental distribution analysis demonstrated that Sm and Ga prefer to enter grain boundary during the annealing process, providing the possibility of obtaining continuous non-ferromagnetic grain boundary. However, the distribution of Sm and Ga in the grain boundary is not uniform, and there are some other regions with more Fe and Co, which is difficult to achieve effective demagnetization coupling between grains, resulting in the easy de-magnetization of the grains. TEM results show that nano-sized weak magnetic 1:9 phases are observed and exist around the 1:12 phase, which may be a region prone to demagnetization in an opposing magnetic field. Overall, this work reveals some new and important factors restricting the development of high performance in ThMn 12-type magnets.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties of Alloys · Magnetic Properties and Applications · Electric Motor Design and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. SmFe12-based hard magnetic alloys prepared by reduction-diffusion process10.1016/j.jallcom.2020.157993 ↗
2. Correlating changes of the unit cell parameters and microstructure with magnetic properties in the CeFe11Ti compound10.1016/j.jallcom.2021.158805 ↗
3. Evolution of core-shell structure induced by Yttrium in Nd-LaCe-Fe-B multi-main-phase magnets10.1016/j.jallcom.2021.163127 ↗
4. High coercivity Nd-Fe-B magnet with low Tb concentration by combined diffusion10.1016/j.jmmm.2020.167701 ↗
5. Effects of diffusing DyZn film on magnetic properties and thermal stability of sintered NdFeB magnets10.1016/j.jmmm.2018.01.070 ↗
6. Relations of the structure and thermal stability of NdFeB magnet with the magnetic alignment10.1016/j.jmmm.2018.07.090 ↗
7. Coercivity enhancement of the sintered Nd-Ce-Fe-B magnet via grain boundary diffusion with Tb70Fe30 alloy10.1016/j.jmmm.2022.169034 ↗
8. Recent advances in SmFe12-based permanent magnets10.1080/14686996.2021.1913038 ↗
9. Prospects for the development of SmFe12-based permanent magnets with a ThMn12-type phase10.1016/j.scriptamat.2020.113686 ↗
10. Magnetic anisotropy and crystal structure of intermetallic compounds of the ThMn12 structure10.1063/1.342437 ↗
11. Anisotropic, single-crystalline SmFe12-based microparticles with high roundness fabricated by jet-milling10.1016/j.jallcom.2019.06.365 ↗
12. Intrinsic hard magnetic properties of Sm(Fe,Co)12−xTix compound with ThMn12 structure10.1016/j.jallcom.2020.158477 ↗
13. Thermal decomposition of ThMn12-type phase and its optimum stabilizing elements in SmFe12-based alloys10.1016/j.jallcom.2019.152224 ↗
14. Phase relations and extrinsic magnetic properties of Sm–(Fe,Co)–Ti–(Ga)-based alloys for ThMn12-type permanent magnets10.1016/j.jmmm.2021.167866 ↗
15. Development of ultra-fine grain sized SmFe12-based powders using hydrogenation disproportionation desorption recombination process10.1016/j.actamat.2018.11.065 ↗
16. Magnetic properties of SmFe12-based magnets produced by spark plasma sintering method10.1016/j.jallcom.2018.09.297 ↗
17. Role of V on the coercivity of SmFe12-based melt-spun ribbons revealed by machine learning and microstructure characterizations10.1016/j.scriptamat.2021.113925 ↗
18. The Sm-Fe-V based 1:12 bulk magnets10.1016/j.jallcom.2019.03.249 ↗
19. High-coercivity Sm(Fe,V,Ti)12 bulk magnets10.1016/j.materresbull.2020.111060 ↗
20. Origin of coercivity in an anisotropic Sm(Fe,Ti,V)12-based sintered magnet10.1016/j.actamat.2021.117161 ↗
21. Intrinsic magnetic properties of (Sm,Gd)Fe12-based compounds with minimized addition of Ti10.1016/j.jallcom.2020.157491 ↗
22. Intrinsic magnetic properties of SmFe12−xVx alloys with reduced V-concentration10.1016/j.jallcom.2019.01.332 ↗
23. Twins – A weak link in the magnetic hardening of ThMn12-type permanent magnets10.1016/j.actamat.2021.116968 ↗