Effect of deformation twinning on microstructure refinement of Fe-38Mn alloy during friction stir processing
Source abstract
Abstract
The effect of deformation twinning on microstructure refinement was investigated for Fe-38Mn alloy during friction stir processing. It was proved that the friction stir processing microstructure of Fe-38Mn alloy was gradient distribution. The stir zone contained both recrystallized grains and fine deformed grains with average grain size of about 15 µm, and the proportion of twin boundaries in the deformed grain zone was up to 35%. Moreover, the cyclic multidirectional shear induced micro-shear bands and sub-grains with high density dislocations, as well as plentiful deformation twins. The microstructure refinement of Fe-38Mn alloy during friction stir processing resulted from the dynamic recrystallization mechanism and twinning mechanism. In addition, the cyclic multidirectional shear deformation enhanced the deformation twinning effect, so that the microstructure refinement process was completed quickly and effectively. The above works indicate a dynamic mechanism of microstructure refinement in term of the deformation twinning during friction stir processing.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
2. Large strain work hardening and textures10.1016/0079-6425(80)90001-8 ↗
3. A model of grain fragmentation based on lattice curvature10.1016/j.actamat.2009.11.020 ↗
4. Physical simulation of microstructural evolution in linear friction welded joints of Ti-6Al-4V alloy10.1179/1362171815Y.0000000007 ↗
5. Physical simulation of asymmetric sheet rolling process by multicycle shear-compression testing10.1016/j.proeng.2017.10.918 ↗
6. The hot deformation activation energy of 7050 aluminum alloy under three different deformation modes10.3390/met6030049 ↗
7. Combined deformation behavior and microstructure evolution of 7050 aluminum alloy during hot shear-compression deformation10.1016/j.matchar.2016.10.025 ↗
8. Interactions between twins and dislocations during dynamic microstructure evolution for hot shear-compression deformation of Fe-38Mn austenitic steel10.1016/j.jallcom.2017.11.303 ↗
9. Kovács · 1973
10. Effects of pressure on the generalized stacking fault energy and twinning propensity of face-centered cubic metals10.1016/j.jallcom.2021.158869 ↗
11. Deformation twinning10.1016/0079-6425(94)00007-7 ↗
12. Microstructure and twinning behavior of TWIP steel deformed by ECAP at warm temperature
13. 70nm: The most unstable grain size in Cu prepared by surface mechanical grinding treatment10.1016/j.nanoms.2020.01.001 ↗
14. Sliding of coherent twin boundaries10.1038/s41467-017-01234-8 ↗
15. Size dependence of grain boundary migration in metals under mechanical loading10.1103/PhysRevLett.122.126101 ↗
16. A study on crystal plasticity of face-centered cubic structures induced by deformation twinning10.1016/j.actamat.2020.07.040 ↗
17. Nanostructural metallic materials: structures and mechanical properties10.1016/j.mattod.2020.04.005 ↗
18. Dynamic microstructure evolution and mechanism of Fe-38Mn alloy during hot shear-compression deformation10.1016/j.msea.2018.12.059 ↗
19. Thomas W.M., Nicholas E.D., Needham J.C., et al., Great Britain Patent Application No. 9125978.8. 1991.
20. Microstructural studies of friction stir welded Zircaloy-410.1016/j.scriptamat.2012.04.029 ↗
21. A study on microstructural evolution and dynamic recrystallization during isothermal deformation of a Ti-modified austenitic stainless steel10.1007/s11661-010-0517-7 ↗
22. Structural response of superaustenitic stainless steel to friction stir welding10.1016/j.actamat.2011.05.021 ↗
23. Formation of annealing twins in f.c.c. crystals10.1016/S1359-6454(96)00336-9 ↗
24. The role of annealing twins during recrystallization of Cu10.1016/j.actamat.2007.03.021 ↗
25. The effect of dislocation density on the interactions between dislocations and twin boundaries in nanocrystalline materials10.1016/j.actamat.2012.02.026 ↗