Laser-induced photocoloration in molybdenum oxide thin films
Source abstract
Abstract
Abstract Photocoloration refers to the induced change in the color of a transparent material exposed to a light source whose excitation wavelength is in the ultraviolet (UV) spectral range. Compared to conventional light sources, UV lasers can enhance this effect. The color change is significantly related to the structural and chemical properties of the irradiated material. This change leads to the appearance of an absorption band in the near-infrared range, with corresponding variations in the optical properties of the material. Molybdenum oxide has been demonstrated to exhibit a superior coloration response to UV radiation. In this work, MoO3 thin films were irradiated with a 325-nm UV laser. The dependence of the resulting absorption bands on the amorphous and substoichiometric nature of the films was investigated. Moreover, the valence states of molybdenum were analyzed, and the absorption bands were statistically resolved to elaborate on the coloration mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Surface Roughness and Optical Measurements · Pigment Synthesis and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Effect of a CdSe layer on the thermo- and photochromic properties of MoO3 thin films deposited by physical vapor deposition10.1021/acs.jpcc.9b02895 ↗
2. Investigation on the coloring and bleaching processes of WO3−x photochromic thin films10.1039/D0TC02170A ↗
3. The evolution of the Mo5+ oxidation state in the thermochromic effect of MoO3 thin films deposited by rf magnetron sputtering10.1016/j.jallcom.2017.06.149 ↗
4. Novel coral-like hexagonal MoO3 thin films: synthesis and photochromic properties10.1016/j.mssp.2014.03.055 ↗
5. Wettability and photochromic behavior of molybdenum oxide thin films10.1016/j.tsf.2011.09.068 ↗
6. Effect of ZnSe doping on the photochromic properties of MoO3 thin films10.1016/j.tsf.2009.05.054 ↗
7. Enhanced photochromism in nanostructured molybdenum trioxide films10.1063/1.3196548 ↗
8. Photochromic response and steady-state photoconductivity of fibrous-reticulated α-MoO3 thin films prepared by modified spray pyrolysis technique10.1002/crat.201900122 ↗
9. Electrically activated UV-A filters based on electrochromic MoO3−x10.1021/acsami.9b20916 ↗
10. Detection of toxic fluoride ion via chromogenic and fluorogenic sensing. A comprehensive review of the year 2015–201910.1016/j.saa.2019.117817 ↗
11. Chromogenic materials in smart windows for angular-selective filtering of solar radiation
12. Coloration of molybdenum oxide thin films synthesized by spray pyrolysis technique10.1016/j.tsf.2016.12.033 ↗
13. Characterization on electron beam evaporated α-MoO3 thin films by the influence of substrate temperature10.1016/j.cap.2005.10.001 ↗
14. Sequential deposition of electrochromic MoO3 thin films with high coloration efficiency and stability10.1149/2.1201714jes ↗
15. Synthesis and electrochromic properties of molybdenum oxide films10.1016/j.surfcoat.2018.12.028 ↗
16. Laser coloration and bleaching of amorphous WO3 thin film10.1063/1.373780 ↗
17. Synthesis and characterization of photochromic molybdenum and tungsten oxide nanoparticles10.1016/S0965-9773(99)00102-6 ↗
18. Optical characteristics of amorphous V2O5 thin films colored by an excimer laser10.1016/j.cap.2011.08.007 ↗
19. Laser-induced colouration of V2O510.1088/0022-3727/33/18/318 ↗
20. Analyses of surface coloration on TiO2 film irradiated with excimer laser10.1016/j.apsusc.2007.09.005 ↗
21. Ultraviolet laser irradiation induced chemical reactions of some metal oxides10.1039/b006787n ↗
22. Molybdenum oxide nanosheets prepared by an anodizing-exfoliation process and observation of photochromic properties10.1016/j.apsusc.2016.11.225 ↗
23. The influence of initial stoichiometry on the mechanism of photochromism of molybdenum oxide amorphous films10.1016/j.solmat.2014.03.033 ↗
24. Chromogenic MoO3 thin films: thermo-, photo-, and electrochromic response to working pressure variation in rf reactive magnetron sputtering
25. Substrate temperature influenced structural, electrical and optical properties of dc magnetron sputtered MoO3 films10.1016/j.apsusc.2009.11.086 ↗
26. Molybdenum oxide thin films obtained by the hot-filament metal oxide deposition technique10.1021/cm034551a ↗
27. Photochromic properties of double layer CdS/MoO3 nano-structured films10.1016/S0921-5107(03)00078-3 ↗
28. Electrical, optical and surface characterization of reactive RF magnetron sputtered molybdenum oxide films for solar cell applications10.1016/j.mssp.2019.05.018 ↗
29. Oxygen-vacancy-tunable electrochemical properties of electrodeposited molybdenum oxide films10.1021/acsami.9b04386 ↗
30. Dynamic XPS measurements on bismuth molybdenite surfaces10.1016/0039-6028(96)00083-0 ↗
31. Nanostructured WO3 films synthesized on mica substrates with novel photochromic properties10.1016/j.jallcom.2015.10.103 ↗
32. Optical and electrical properties of MoO2 and MoO3 thin films prepared from the chemically driven isothermal close space vapor transport technique10.1088/1361-648X/ab18e2 ↗
33. Optical properties and electronic structures of layered MoO3 single crystals10.1088/0953-8984/13/31/319 ↗
34. Optical constants of hydrogenated zinc oxide thin films10.1364/OME.4.002323 ↗
35. The nature of the photochromism arising in nanosized MoO3 films10.1016/j.solmat.2011.02.006 ↗
36. The influence of oxygen on the microstructural, optical and photochromic properties of polymer-matrix, tungsten oxide nanocomposite films10.1016/j.solmat.2013.08.023 ↗