journal article·2021-04

Thermally-enhanced microstructures of Si/TiNi film electrodes for improved electrochemical properties

Gyu-Bong Cho, Jin-Hoon Ju, Won-Tae Lee, Sang-Hee Park, Hyo-Jun Ahn, Ki-Won Kim, Kwon-Koo Cho, Tae-Hyun Nam

Publisher page

Abstract

Abstract The structural and electrochemical properties of annealed Si film electrodes with titanium–nickel (TiNi) current collectors have been investigated to identify compounds and microstructures that improve electrochemical performances. The as-deposited Si/TiNi electrode consisted of amorphous Si (α–Si) and crystalline B2–TiNi alloy at room temperature. Only a thin oxide layer was formed at the interface, and any significant microstructural change was not found at 500 °C compared to the as-deposited electrode. The Ni atoms started to migrate from the TiNi alloy to the Si film at 600 °C, which resulted in the formation of a Ti-rich (Ti2Ni) layer at the interface. A large amount of Ni diffused into the Si film at 700 °C led to the formation of nickel silicide (NiSi2) particles being dispersed in the film. The Si/TiNi electrodes that were annealed at a temperature exceeding 600 °C showed improved electrochemical properties such as initial efficiency (~90%) and cycle performance (50% capacity retention after 300 cycles). The excellent electrochemical performance was achieved by enhancing the structural stability in annealed Si/TiNi electrodes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Semiconductor materials and interfaces · Electrodeposition and Electroless Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. Wearable electronics and smart textiles: a critical review10.3390/s140711957 ↗
3. Challenges in the development of advanced Li-ion batteries: a review10.1039/c1ee01598b ↗
4. Carbon anode materials for lithium ion batteries10.1016/S0378-7753(02)00596-7 ↗
5. Structural changes in silicon anodes during lithium insertion/extraction10.1149/1.1652421 ↗
6. Reversible cycling of crystalline silicon powder10.1149/1.2402112 ↗
7. Simple electrodeposition of MoO3 film on carbon cloth for high-performance aqueous symmetric supercapacitors10.1016/j.cej.2020.124477 ↗
8. In situ synthesis of 3D Co@Co3O4 nanosheet arrays for hybrid supercapacitors with ultra-high rate performance10.1016/j.jallcom.2020.154115 ↗
9. Entire synergistic contribution of electrodeposited battery-type NiCo2O4@Ni4.5Co4.5S8 composite for high-performance supercapacitors10.1016/j.jpowsour.2019.227097 ↗
10. Electrochemical properties of Si thin film prepared by pulsed laser deposition for lithium ion micro-batteries10.1016/j.electacta.2006.01.045 ↗
11. An in situ X-ray diffraction study of the reaction of Li with crystalline Si10.1149/1.2409862 ↗
12. Amorphous silicon thin films as a high capacity anodes for Li-ion batteries in ionic liquid electrolytes10.1016/j.elecom.2006.11.014 ↗
13. Stress effect on cycle properties of the silicon thin-film anode10.1016/S0378-7753(01)00761-3 ↗
14. Interfacial properties of the a-Si∕Cu: active–inactive thin-film anode system for lithium-ion batteries10.1149/1.2184753 ↗
15. Studies of the structure of vacuum deposited silicon films on metal substrates as anode materials for Li-ion batteries10.1016/j.jpowsour.2006.04.045 ↗
16. Improvement of capacity and cyclability of Fe/Si multilayer thin film anodes for lithium rechargeable batteries10.1016/j.electacta.2004.12.021 ↗
17. Surface-modified Si thin film electrode for Li ion batteries (LiFePO4/Si) by cluster-structured Ni under layer10.1016/j.jpowsour.2008.08.018 ↗
18. An approach to make macroporous metal sheets as current collectors for lithium-ion batteries10.1149/1.3417076 ↗
19. A layer-built rechargeable lithium ribbon-type battery for high energy density textile battery applications10.1039/C3TA14197G ↗
20. High-performance lithium battery anodes using silicon nanowires10.1038/nnano.2007.411 ↗
21. Superior lithium electroactive mesoporous Si@carbon core-shell nanowires for lithium battery anode material10.1021/nl801853x ↗
22. Composite silicon nanowire anodes for secondary lithium-ion cells10.1149/1.3251341 ↗
23. Maximum Li storage in Si nanowires for the high capacity three-dimensional Li-ion battery10.1063/1.3299006 ↗
24. Crystalline-amorphous core-shell silicon nanowires for high capacity and high current battery electrodes10.1021/nl8036323 ↗
25. Novel three-dimensional mesoporous silicon for high power lithium-ion battery anode material10.1002/aenm.201100485 ↗
26. Nanostructured silicon for high capacity lithium battery anodes10.1039/C0EE00281J ↗
27. Silicon porosification: state of the art10.1080/10408436.2010.495446 ↗
28. Arrays of sealed silicon nanotubes as anodes for lithium ion batteries10.1021/nl100086e ↗
29. Silicon nanotube battery anodes10.1021/nl902058c ↗
30. Nanostructured hybrid silicon/carbon nanotube heterostructures: reversible high-capacity lithium-ion anodes10.1021/nn901632g ↗
31. Crystalline-amorphous core-shell silicon nanowires for high capacity and high current battery electrodes10.1021/nl8036323 ↗
32. Thermoelasticity, pseudoelasticity and the memory effects associated with martensitic transformations10.1007/BF00552939 ↗
33. Deformation behavior of shape memory Ti·Ni alloy crystals10.1016/0036-9748(84)90453-8 ↗
34. Electrochemical properties of Si film electrodes with TiNi shape memory alloy as a current collector10.1016/j.jallcom.2011.12.173 ↗
35. Shape memory thin film of Ti·Ni formed by sputtering10.1016/0040-6090(93)90600-T ↗
36. TiNi (shape memory) films silicon for MEMS applications10.1109/84.475547 ↗
37. Nondestructive dynamic evaluation of thin NiTi film adhesion10.1163/156856194X00384 ↗
38. Mechanical stability of Si thin film deposited on a Ti–50.3Ni(at%) alloy10.1016/j.jallcom.2010.03.023 ↗
39. Shape memory effect-induced crack closure in Si thin film deposited on a Ti–50.3Ni (at%) alloy substrate10.1016/j.jallcom.2010.07.136 ↗
40. XTEM studies of nickel silicide growth on Si(100) using a Ni/Ti bilayer system10.1002/1521-396X(199708)162:2<615::AID-PSSA615>3.0.CO;2-Q ↗
41. Interfacial reaction barriers during thin-film solid-state reactions: the crystallographic origin of kinetic barriers at the NiS2/Si(111) interface10.1007/BF00331780 ↗
42. Nickel induced crystallization of amorphous silicon thin films10.1063/1.368016 ↗
43. Influence of doping concentration on Ni-induced lateral crystallization of amorphous silicon films10.1016/S0927-0248(02)00086-7 ↗
44. Electroless plating Ni induced crystallization of amorphous silicon thin films10.1143/JJAP.40.5244 ↗
45. Fabrication of<111>-oriented Si film with a Ni/Ti layer by metal induced crystallization10.1143/JJAP.40.L186 ↗