journal article·2020-11

Strengthening by hierarchical-structured nanoparticles in powder metallurgy manufactured ODS ferritic alloy

Shengxi Wang, Ye Liu, Lin Zhang, Xiaowei Chen, Lijun Song, Xuanhui Qu

Publisher page

Abstract

Abstract The synergic strengthening of powder metallurgy ferritic alloy by hierarchical-structured nanoparticles was exploited with the aim to further enhance the elevated-temperature mechanical properties. The characteristics and heterogeneous nucleation of hierarchical-structured nanoparticles, as well as its influence on mechanical properties were investigated. A high number density of hierarchical nanoparticles with size of 5–13 nm were formed in the peak aged sample. The hierarchical nanoparticles were the co-precipitation products of Y–Al–O oxides, Ni(Al,Mn) intermetallic phase and Cu-rich clusters. Cu-rich clusters first heterogeneous nucleate at the pre-existing interface of bcc-Fe/oxide, and then Ni, Al and Mn diffuse outwards from the Cu-rich cluster, resulting in the heterogeneous precipitation of B2–Ni(Al,Mn) nanoparticles at the Cu cluster/bcc-Fe interface. With the growth of B2–Ni(Al,Mn) nanoparticles, the oxide/Cu-rich cluster/B2–Ni(Al,Mn) hierarchical-structured nanoparticles were formed. A coherent or semi-coherent nature was revealed between Y–Al–O/bcc-Fe, Y–Al–O/bcc-Cu, bcc-Cu/NiAl and NiAl/bcc-Fe. Owing to the lattice-strain field and the load transfer capability, the hierarchical-structured nanoparticles were accounted for the enhanced mechanical properties of ferritic alloy above 650 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fusion materials and technologies · High-Temperature Coating Behaviors · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Ferritic Fe-Al-Ni-Cr alloys with coherent precipitates for high-temperature applications
2. The strengthening effect of (Ni,Fe)Al precipitates on the mechanical properties at high temperatures of ferritic Fe-Al-Ni-Cr alloys10.1016/j.intermet.2004.07.048 ↗
3. Thermodynamic modeling and experimental validation of the Fe-Al-Ni-Cr-Mo alloy system10.1016/j.matlet.2011.11.056 ↗
4. New NiAl-strengthened ferritic alloys with balanced creep resistance and ductility designed by coupling thermodynamic calculations with focused experiments10.1016/j.intermet.2012.05.007 ↗
5. Accelerated precipitation in the AFA stainless steel Fe-20Cr-30Ni-2Nb-5Al via cold working10.1016/j.intermet.2014.04.018 ↗
6. Interphase precipitation of nanometer-sized carbides in a titanium-molybdenum-bearing low-carbon steel10.1016/j.actamat.2011.06.037 ↗
7. On the role of alloy composition and processing parameters in nanocluster formation and dispersion strengthening in nanostuctured ferritic alloys10.1016/j.actamat.2008.09.025 ↗
8. Characterization of oxide nanoprecipitates in an oxide dispersion strengthened 14YWT steel using aberration-corrected STEM10.1016/j.actamat.2012.06.042 ↗
9. Splitting phenomenon in the precipitation evolution in an Fe-Ni-Al-Ti-Cr stainless steel10.1016/j.actamat.2009.10.030 ↗
10. Investigations on the growth kinetics of Laves phase precipitates in 12% Cr creep-resistant steels: experimental and DICTRA calculations10.1016/j.actamat.2010.07.033 ↗
11. Microstructure and micro-hardness behavior of Ti–Y2O3–Al–Si composite coatings prepared in electron-plasma alloying10.1016/j.matchar.2019.109934 ↗
12. Effect of electron-plasma alloying on structure and mechanical properties of Al-Si alloy10.1016/j.apsusc.2019.143767 ↗
13. Modification of surface layer of hypoeutectic silumin by electroexplosion alloying followed by electron beam processing10.1016/j.matlet.2019.05.148 ↗
14. Argon · 2008
15. Microstructure characterization of Cu-rich nanoprecipitates in a Fe-2.5 Cu-1.5 Mn-4.0 Ni-1.0 Al multicomponent ferritic alloy10.1016/j.actamat.2012.12.034 ↗
16. Duplex precipitates and their Effects on the room-temperature fracture behaviour of a NiAl-strengthened ferritic alloy10.1080/21663831.2015.1021492 ↗
17. Precipitation hardening10.1007/BF02670416 ↗
18. Carbon redistribution and carbide precipitation in a high-strength low-carbon HSLA-115 steel studied on a Nanoscale by atom probe tomography10.1007/s11661-017-4129-3 ↗
19. The influence of coherency strain on the elevated-temperature tensile behavior of Ni-15cr-Al-Ti-Mo alloys10.1007/BF02643569 ↗
20. Microstructural characteristics of a Ni2TiAl-precipitate-strengthened ferritic alloy10.1016/j.jallcom.2016.09.177 ↗
21. Precipitation mechanism and mechanical properties of an ultra-high strength steel hardened by nanoscale NiAl and Cu particles10.1016/j.actamat.2015.06.063 ↗
22. Increasing the creep resistance of Fe-Ni-Al-Cr superalloys via Ti additions by optimizing the B2/L21 ratio in composite nano-precipitates10.1016/j.actamat.2018.07.025 ↗
23. Creep properties and microstructure of a precipitation-strengthened ferritic Fe-Al-Ni-Cr alloy10.1016/j.actamat.2014.02.020 ↗
24. Creep behavior as dislocation climb over NiAl nanoprecipitates in ferritic alloy: the effects of interface stresses and temperature10.1016/j.ijplas.2015.02.006 ↗
25. Effect of titanium additions upon microstructure and properties of precipitation-strengthened Fe-Ni-Al-Cr ferritic alloys10.1016/j.actamat.2017.02.028 ↗
26. Ferritic alloys with extreme creep resistance via coherent hierarchical precipitates10.1038/srep16327 ↗
27. New design aspects of creep-resistant NiAl-strengthened ferritic alloys10.1016/j.scriptamat.2012.10.040 ↗
28. Co-precipitation kinetics, microstructural evolution and interfacial segregation in multicomponent nano-precipitated steels10.1016/j.matchar.2019.06.028 ↗
29. Multicomponent high-strength low-alloy steel precipitation-strengthened by sub-nanometric Cu precipitates and M2C carbides10.1007/s11661-016-3569-5 ↗
30. Strategies for strengthening-ductility and hierarchical co-precipitation in multicomponent nano-precipitated steels by Cu partitioning10.1016/j.msea.2018.10.036 ↗
31. In situ neutron-diffraction studies on the creep behavior of a ferritic superalloy10.1007/s11661-011-0979-2 ↗
32. Effects of Mn partitioning on nanoscale precipitation and mechanical properties of ferritic steels strengthened by NiAl nanoparticles10.1016/j.actamat.2014.10.065 ↗
33. Mechanically alloyed metals10.1179/026708300101507361 ↗
34. An assessment of studies on homogeneous diffusional nucleation kinetics in binary metallic alloys10.1007/BF02647541 ↗
35. Experimental study on the contact angle formation of solidified iron-chromium droplets onto yttria ceramic substrates for the yttria/ferrous alloy system with variable chromium content10.1016/j.ceramint.2013.07.137 ↗
36. Interface phenomena in the Y2O3/(Al–Cu) system10.1016/j.msea.2006.01.048 ↗
37. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
38. Microstructural characterization and strengthening mechanisms of a 12Cr-ODS steel10.1016/j.msea.2016.07.030 ↗
39. Kelly · 1971
40. A dispersion strengthening model based on differing elastic moduli applied to the iron-copper system10.1016/0001-6160(72)90091-0 ↗
41. Simulation of precipitation kinetics and precipitation strengthening of B2-precipitates in martensitic PH 13-8 Mo steel10.2355/isijinternational.52.610 ↗
42. The precipitation of the intermetallic compound NiAl in Fe-19wt.%Cr alloys10.1016/0025-5416(82)90115-X ↗
43. The Orowan mechanism in anisotropic crystals10.1080/14786437508229295 ↗
44. Dislocation movement through random arrays of obstacles10.1080/14786436608244762 ↗
45. Development of 9Cr-ODS martensitic steel claddings for fuel pins by means of ferrite to austenite phase transformation