journal article·2018-04

Pattern selection of twinned growth in aluminum alloys during Bridgman solidification

Luyan Yang, Shuangming Li, Junbo Guo, Kai Fan, Yang Li, Hong Zhong, Hengzhi Fu

Publisher page

Abstract

Abstract By using the electron backscattered diffraction (EBSD) technique, pattern selection of twinned growth in Al-4.5 wt% Cu alloy has been studied in Bridgman solidification experiments. Based on the original twin planes formed at 3000 μm/s, the twinned growth was produced till the end of solidification after abruptly decreasing the growth rate to 100, 50, 20, 10, 5, 3, 1 and 0.3 μm/s. The stable twinned growth could be achieved during a wide range of solidification process. For the first time, the so-called twinned cell pattern was observed and prevailed in the solidified structure at 3 and less than 3 μm/s. The twinned growth in aluminum alloy was not limited to dendrite pattern as has previously been reported. The twinned pattern selection map was also revealed. Meanwhile, an interesting orientation rotation phenomenon was elucidated using EBSD technique on both sides of the coherent twin boundary during twinned cell growth. At a lower rate of 0.3 μm/s, the orientation rotation deflection concerning the original Σ3 60° twinning relation was confirmed. Some coincidence site lattice boundaries with higher Σ values served as the preferred states for this orientation deflection during growth.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
2. Observations on twinning in semicontinuous cast aluminum10.1007/BF03398154 ↗
3. Some crystallographic observations of growth-twinned dendrites in aluminum10.1016/0022-0248(74)90113-4 ↗
4. <110> dendrite growth in aluminum feathery grains10.1007/s11661-998-0321-9 ↗
5. Twinned dendrite growth in binary aluminum alloys10.1016/j.actamat.2008.07.046 ↗
6. Investigation on the formation mechanism of irregular dendrite during directional solidification of Al–Cu alloys under a high magnetic field10.1016/j.jallcom.2013.07.114 ↗
7. Twinned dendrite growth during Bridgman solidification10.1016/j.actamat.2015.07.008 ↗
8. Electron backscattered diffraction investigation of the texture of feathery crystals in aluminum alloys10.1007/s11661-997-0097-3 ↗
9. Dendrite growth morphologies in aluminium alloys10.1016/S1359-6454(98)00308-5 ↗
10. The influence of solid–liquid interfacial energy anisotropy on equilibrium shapes, nucleation, triple lines and growth morphologies10.1016/j.scriptamat.2010.02.039 ↗
11. Influence of convection on feathery grain formation in aluminum alloys10.1007/s11661-006-0229-1 ↗
12. Feathery grain growth during solidification under forced flow conditions10.1016/j.actamat.2007.02.030 ↗
13. Influence of Cr on the nucleation of primary Al and formation of twinned dendrites in Al-Zn-Cr alloys: can icosahedral solid clusters play a role?10.1016/j.actamat.2013.07.056 ↗
14. Kurtuldu · 2014
15. Thermodynamic aspects of homogeneous nucleation enhanced by icosahedral short range order in liquid fcc-type alloys10.1007/s11837-015-1328-5 ↗
16. Study of twinned dendrite growth stability10.1016/j.scriptamat.2009.04.016 ↗
17. Concurrent high strength and high ductility in isotropic bulk Cu–Al alloy with three-dimensional nano-twinned structure10.1016/j.jallcom.2011.11.075 ↗
18. Strengthening materials by engineering coherent internal boundaries at the nanoscale10.1126/science.1159610 ↗
19. Formation of nanostructured surface layer on AISI 304 stainless steel by means of surface mechanical attrition treatment10.1016/S1359-6454(02)00594-3 ↗
20. Kurz · 1998
21. Glicksman · 2010
22. Tiller · 1991
23. Eutectic spacing selection in lead-based alloy systems10.1007/BF02665018 ↗
24. Primary spacing selection in directionally solidified alloys10.1016/0956-7151(94)90045-0 ↗
25. History-dependent selection of primary cellular/dendritic spacing during unidirectional solidification in aluminum alloys10.1016/S1359-6454(99)00166-4 ↗
26. Experimental evidence for a zigzag bifurcation in bulk lamellar eutectic growth10.1103/PhysRevLett.93.175701 ↗
27. Pattern formation during solidification10.1201/9781420033502-12 ↗
28. Influence of growth velocity variations on the pattern formation during the directional solidification of ternary eutectic Al-Ag-Cu10.1016/j.actamat.2017.07.007 ↗
29. Dendritic growth10.1179/imr.1994.39.2.49 ↗
30. Effect of an abrupt change growth velocity on directionally solidified microstructures of Ni–24.19 wt% Nb hypereutectic alloy10.1016/j.msea.2007.04.086 ↗
31. The effect of free-floating dendrites and convection on macrosegregation in direct chill cast aluminum alloys Part II: predictions for Al-Cu and Al-Mg alloys10.1016/S0017-9310(99)00175-1 ↗
32. Salgado Ordorica · 2009
33. Hydrogen porosity in directional solidified aluminium-copper alloys: in situ observation10.1016/S1359-6454(97)00081-5 ↗
34. Diffusion-controlled growth of hydrogen pores in aluminium–silicon castings: in situ observation and modelling10.1016/S1359-6454(99)00363-8 ↗
35. Numerical modeling of cellular/dendritic array growth: spacing and structure predictions10.1007/BF02648950 ↗
36. Interdendritic spacing: Pt. II. A comparison of theory and experiment10.1007/BF02644689 ↗
37. Dendrite growth at the limit of stability: tip radius and spacing10.1016/0001-6160(81)90082-1 ↗
38. Dantzig · 2016
39. Karma · 2001 · vols. 365–402
40. Solidification microstructures and solid-state parallels: recent developments, future directions10.1016/j.actamat.2008.10.020 ↗
41. Formation of feathery grains with the application of a static magnetic field during direct chill casting of Al-9.8wt%Zn alloy10.1007/s10853-008-3158-0 ↗
42. A theoretical approach to grain-boundary-character-distribution (GBCD) in textured polycrystalline materials