Magnetic properties assessment of laser welded ultra-thin Fe–Co–V foils
Source abstract
Abstract
Abstract In this research work, the magnetic properties of laser welded Fe–Co–7.15 wt%V foils were investigated and a statistical analysis of Nd:YAG laser beam welding of these foils was done using response surface methodology (RSM). The results indicated that the welded samples experience a significant decrease in their magnetic properties. The input process parameters such as lamping current (130–160 A), pulse duration (1.5–3 ms), travel speed (50–200 mm/min) and focused position (−2 to −0.5 mm) were selected suitably in order to obtain the desired output, i.e., the magnetic properties of the welded samples. This paper highlighted the use of RSM by designing a four-factor five-level central composite rotatable design matrix with the full replication for planning, conduction, execution and development of mathematical models. The main effect of each factor and the interaction effect with other factors were determined quantitatively and presented graphically. Analysis of variance and other adequacy measures were employed to check the adequacy of the developed model. A laser beam with lamping current, pulse duration, welding speed and focused position of 145 A, 1.5 ms, 125 mm/min and −0.5 mm respectively were identified as the optimal set of laser welding parameters to obtain a welded area with desirable magnetic properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Magnetic domains and coercivity in FeCo soft magnetic alloys10.1063/1.369073 ↗
2. Effect of heat-treatment on the room temperature ductility of an ordered intermetallic Fe–Co–V alloy10.1016/j.msea.2003.11.004 ↗
3. Near equiatomic FeCo alloys: constitution, mechanical and magnetic properties10.1016/j.pmatsci.2005.04.001 ↗
4. Magnetic anisotropy in cold rolled vicalloy magnet10.2320/matertrans1960.4.22 ↗
5. Structures and mechanical properties of FeCo–2V alloy10.1007/BF00544171 ↗
6. On the role of atomic ordering in the formation of a high-coercivity state in iron–cobalt–vanadium alloys10.1134/S0031918X12010152 ↗
7. Deformation texture and magnetic properties of dual-phase Fe–Co–V alloys10.1016/j.matdes.2009.03.033 ↗
8. Dapino · 1999
9. The disorder-order transformation in iron-cobalt-based alloys10.1179/030634573790445541 ↗
10. Character of transformations in Fe–Co system10.1016/S0921-5093(98)00506-1 ↗
11. Influence of alloying elements on the mechanical properties of FeCo–V alloys10.1016/j.intermet.2004.02.022 ↗
12. Influence of thermal treatments on the mechanical properties of an Fe–Co–V alloy (Remendur)10.1016/0001-6160(76)90026-2 ↗
13. Phase transformations and properties of Fe–Co alloys10.1007/BF02833751 ↗
14. Laughton · 2003
15. Callister · 2001
16. Microstructural and microtextural analysis of InterPulse GTCAW welds in Cp-Ti and Ti–6Al–4V10.1016/j.msea.2010.08.036 ↗
17. Fatigue crack fusion in thin-sheet aluminum alloys AA7075-T6 using low-speed fiber laser welding10.1016/j.jmatprotec.2010.09.001 ↗
18. A study on fiber laser micro-spot welding of thin stainless steel using response surface methodology and simulated annealing approach10.1007/s00170-012-4544-y ↗
19. S. Katayama, Introduction: fundamentals of laser welding, Handbook of laser welding technologies, S. (Eds.), Woodhead Publishing Limited, Cambridge, 2013, pp. 3–5.10.1533/9780857098771 ↗
20. Y.H. Tian, C.Q. Wang, Laser soldering, Y. Zhou (Eds.), Microjoining and nanojoining Woodhead Publishing Limited, Cambridge, 2008, pp. 299.10.1533/9781845694043.2.299 ↗
21. High density energy beam welding processes: electron beam and laser beam
22. Autogenous laser welding of stainless steel to free-cutting steel for the manufacture of hydraulic valves10.1016/S0924-0136(97)00265-3 ↗
23. Dual-beam laser welding of ultra-thin AA 5052-H19 aluminum10.1007/s00170-007-1278-3 ↗
24. Optimization of laser beam welding process parameters to attain maximum tensile strength in AZ31B magnesium alloy10.1016/j.optlastec.2010.03.019 ↗
25. Micro welding of Ni-based alloy Monel 400 thin foil by pulsed Nd:YAG laser10.1016/j.phpro.2011.03.143 ↗
26. Laser welding of thin foil nickel–titanium shape memory alloy10.1016/j.optlaseng.2010.08.007 ↗
27. Q-switch Nd:YAG laser welding of AISI 304 stainless steel foils10.1016/j.msea.2007.08.063 ↗
28. Laser pulsed welding in thin sheets of Zircaloy-410.1016/j.jmatprotec.2011.12.022 ↗
29. Parametric analysis of the pulsed Nd:YAG laser seam-welding process10.1016/S0924-0136(00)00447-7 ↗
30. On the experimental attainment of optimum conditions10.1111/j.2517-6161.1951.tb00067.x ↗
31. Pinning effect of the grain boundaries on magnetic domain wall in FeCobased magnetic alloys10.1063/1.370175 ↗
32. Porter · 2001
33. Local orientation analysis by electron backscatter diffraction in highly textured sintered, die-upset, and hydrogenation disproportionation desorption and recombination Nd–Fe–B magnets10.1063/1.3561791 ↗
34. The influence of laser welding parameters on the microstructure and mechanical property of the as-jointed NiTi alloy wires10.1016/j.matlet.2007.11.082 ↗
35. High strength FeCo–V intermetallic alloy: electrical and magnetic properties10.1557/JMR.2005.0206 ↗
36. Mechanical and metallurgical properties of pulsed neodymium-doped yttrium aluminum garnet laser welding of dual phase steels10.1016/j.matdes.2011.06.070 ↗
37. Weld metal microstructural characteristics in pulsed Nd:YAG laser welding10.1016/j.scriptamat.2007.02.019 ↗
38. Cohran · 1963
39. Montgomery · 1984
40. Miller · 1999