Quantitative phase prediction in a eutectic AlCoCrFeNi2.1 high-entropy alloy HVOF coating using Scheil simulation
Source abstract
Abstract
Eutectic high-entropy alloys (EHEAs) feature multiple distinct phases, unlike the single-phase solid solutions typical of conventional high-entropy alloys (HEAs). While EHEAs inherently consist of multiple phases, their performance as thermal spray coatings is directly influenced by their relative phase proportion and microstructural distribution, making phase control crucial for property optimization. While CALPHAD has been used to predict phases in HEAs, there remains a critical gap in its quantitative phase predictive capabilities, particularly for non-equilibrium cooling processes imitated by Scheil simulation. This study investigates Scheil simulation as a tool for both qualitative and quantitative phase prediction in the AlCoCrFeNi 2.1 EHEA HVOF (high velocity oxygen fuel) processed coating. The HVOF coating exhibited a deformed zone with unmelted and partially melted regions retaining the eutectic structure of the original powder, as well as a rapid solidified zone displaying a single-phase FCC solid solution. Phase fractions, determined by Rietveld analysis, closely matched those predicted by Scheil simulation - 66.7 wt% FCC and 32.3 wt% B2 versus experimental values of 72.7 ± 1.1 wt% FCC and 27.3 ± 1.1 wt% BCC/B2. Furthermore, the coating showed low microhardness and wear resistance, underscoring the limitations of FCC-rich microstructures for tribological applications. These results suggest that Scheil simulations can effectively aid the materials engineering design of EHEA thermal spray coatings. • Phase validation of HVOF-sprayed HEA coating using CALPHAD under rapid solidification. • Scheil simulation reliably predicts phase fractions in HVOF-sprayed EHEA coatings. • Eutectic powder microstructure is partially retained in the HVOF coating. • Dominant FCC phase provides intermediate hardness and limits wear resistance. • Abrasive wear and tribo-oxidation identified as primary wear mechanisms.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
2. Designing high entropy alloys with dual fcc and bcc solid-solution phases: structures and mechanical properties10.1007/s11661-019-05131-1 ↗
3. Eutectic high-entropy alloys
4. Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range10.1016/j.actamat.2016.11.016 ↗
5. Niobium and molybdenum as alloying constituents in Al0.3CoCrFeNi to develop eutectic high-entropy alloys for HVOF spraying
6. Deposition, microstructure and hardness of AlCoCrFeNi2.1 eutectic high entropy alloy coatings by cold spray, HVOF, and plasma spray10.1016/j.surfcoat.2024.131442 ↗
7. Microstructure evolution and mechanical properties of plasma sprayed AlCoCrFeNi2.1 eutectic high-entropy alloy coatings10.1016/j.surfcoat.2023.129924 ↗
8. Effect of nanostructure on wear and corrosion behavior of HVAF-sprayed eutectic high-entropy alloy coatings10.1007/s11666-022-01342-y ↗
9. Current and emerging practices of CALPHAD toward the development of high entropy alloys and complex concentrated alloys10.1557/jmr.2018.152 ↗
10. Designing eutectic high entropy alloys of CoCrFeNiNbx10.1016/j.jallcom.2015.09.153 ↗
11. Search for eutectic high entropy alloys by integrating high-throughput CALPHAD, machine learning and experiments10.1016/j.matdes.2024.112929 ↗
12. Design of NiCoCrAl eutectic high entropy alloys by combining machine learning with CALPHAD method
13. Solidification simulation using Scheil model in multicomponent systems10.1007/s11669-009-9568-0 ↗
14. Nano- and micro-mechanical properties and corrosion performance of a HVOF sprayed AlCoCrFeNi high-entropy alloy coating10.1016/j.jallcom.2022.165000 ↗
15. Microstructure, multi-scale mechanical and tribological performance of HVAF sprayed AlCoCrFeNi high-entropy alloy coating10.1016/j.jallcom.2024.175962 ↗
16. Empirical and computational-based phase predictions of thermal sprayed high-entropy alloys10.1007/s11666-023-01586-2 ↗
17. Thermo-Calc & DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
18. ASTM Standard E1920-03, “Guide for Metallographic Preparation of Thermal Sprayed Coatings,” (2021). 〈https://doi.org/10.1520/E1920-03R21〉.10.1520/E1920-03R21 ↗
19. ASTM Standard E2109-01, “Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings,” (2021). 〈https://doi.org/10.1520/E2109-01R21〉.10.1520/E2109-01R21 ↗
20. ASTM Standard E384-22, “Test Method for Microindentation Hardness of Materials,” (2022). 〈https://doi.org/10.1520/E0384-22〉.10.1520/E0384-22 ↗
21. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
22. The strain-scanning diffractometer kowari10.1080/10448630903241175 ↗
23. ISODEC: Software for calculating diffraction elastic constants10.1107/S0021889812014252 ↗
24. Study of interactive stresses in thin WC-Co coating of thick mild steel substrate using high-precision neutron diffraction10.4028/www.scientific.net/MSF.772.161 ↗
25. Multiscale mechanical performance and corrosion behaviour of plasma sprayed AlCoCrFeNi high-entropy alloy coatings10.1016/j.jallcom.2020.157140 ↗
26. An analytical model for predicting residual stresses in progressively deposited coatings Part 1: planar geometry10.1016/S0040-6090(97)00199-5 ↗
27. Microstructure and mechanical properties of AlCoCrFeNi2.1 eutectic high-entropy alloy synthesized by spark plasma sintering of gas-atomized powder10.1016/j.intermet.2022.107523 ↗
28. Thermal spray high-entropy alloy coatings: a review10.1007/s11666-020-01047-0 ↗
29. Novel reduced-activation TiVCrFe based high entropy alloys10.1016/j.jallcom.2020.157399 ↗
30. Additive manufacturing of a functionally graded high entropy alloy using a hybrid powder-bed wire-based direct energy deposition approach
31. Rapid solidification of AlCoCrFeNi2.1 high-entropy alloy10.1016/j.jallcom.2021.163350 ↗
32. Disorder trapping during the solidification of βni 3Ge from its deeply undercooled melt10.1007/s10853-011-6062-y ↗
33. Inter-particle bonding in cold spray deposition of a gas-atomised and a solution heat-treated Al 6061 powder10.1007/s10853-019-03736-w ↗
34. Aluminum alloying effects on lattice types, microstructures, and mechanical behavior of high-entropy alloys systems10.1007/s11837-013-0776-z ↗
35. Okamoto · 2016
36. Database development and Calphad calculations for high entropy alloys: Challenges, strategies, and tips10.1016/j.matchemphys.2017.07.082 ↗
37. A cobalt-rich eutectic high-entropy alloy in the system Al–Co–Cr–Fe–Ni10.1007/s00339-019-3084-9 ↗
38. Design of eutectic high entropy alloys in Al–Co–Cr–Fe–Ni system10.1007/s12540-020-00655-3 ↗
39. Search for eutectic high entropy alloys by integrating high-throughput CALPHAD, machine learning and experiments10.1016/j.matdes.2024.112929 ↗
40. Effect of heat treatment on microstructure and mechanical properties of as-cast AlCoCrFeNi2.1 eutectic high entropy alloy10.1016/j.jallcom.2023.168843 ↗
41. Fundamentals of solidification10.31399/asm.hb.v09.a0003724 ↗
42. Clyne · Introd. Met. Matrix Compos. Introd. Met. Matrix Compos. · 1993
43. Effects of spraying parameters on the velocity of HVOF-sprayed particles based on the PIV method10.1007/s11666-022-01438-5 ↗
44. Development of particle interface bonding in thermal spray coatings: a review10.1007/s11666-012-9864-9 ↗
45. Nano- and micro-mechanical properties and corrosion performance of a HVOF sprayed AlCoCrFeNi high-entropy alloy coating10.1016/j.jallcom.2022.165000 ↗
46. Microstructure and high-temperature tribological behavior of plasma-sprayed FeCoCrAlNi high entropy alloy coatings under higher load condition10.1007/s11666-022-01359-3 ↗
47. Effect of the high temperature phase transition on the tribological behavior of atmospheric plasma sprayed AlCoCrFeNi-Bi2O3 coating10.1016/j.surfcoat.2023.130286 ↗
48. Microstructure and tribological behavior of a novel atmospheric plasma sprayed AlCoCrFeNi high entropy alloy matrix self-lubricating composite coatings10.1016/j.triboint.2020.106470 ↗
49. Tribological and corrosion performance of an atmospheric plasma sprayed AlCoCr0.5Ni high-entropy alloy coating
50. Enhanced wear resistance of AlCoCrFeMo high entropy coatings (HECs) through various thermal spray techniques10.1016/j.surfcoat.2023.130311 ↗
51. Elevated-temperature wear behavior and mechanisms of APS-sprayed Al0.6TiCrFeCoNi high entropy alloy coating10.1016/j.surfcoat.2023.130294 ↗
52. Wear behavior of HVOF-sprayed Al0.6TiCrFeCoNi high entropy alloy coatings at different temperatures10.1016/j.surfcoat.2018.11.052 ↗
53. Phase evolution and high-temperature wear behavior of non-equiatomic metastable CoCrNiTiMox HEA coatings fabricated by high-velocity oxy-fuel technique
54. Elevated temperature tribological performance of non-equiatomic CoCrNiTiWx high entropy alloy coatings developed by mechanical alloying and high-velocity oxy-fuel spray10.1016/j.surfcoat.2023.130267 ↗
55. Microstructural and tribological behavior of thermal spray crmnfeconi high entropy alloy coatings10.1007/s11666-022-01350-y ↗
56. First report of agglomerated and sintered carbide-high-entropy alloy composite thermal spray coating10.1016/j.scriptamat.2025.116591 ↗