journal article·2025-07

Solvothermal S doping for the optimizing of thermoelectric performance in Ag2Se

Lijun Wang, Pengcheng Miao, Xiao-Lei Shi, Lvzhou Li, Ziyi Shen, Li Huang, Zhi-Gang Chen, Jianning Ding, Ningyi Yuan

Publisher page

Abstract

AgSe, a promising alternative to n-type BiTe thermoelectric materials, shows excellent near-room-temperature thermoelectric performance. In this study, S-doped AgSe materials with a layered structure were synthesized using a low-energy wet chemistry method combined with spark plasma sintering. S-doping effectively reduced the carrier concentration of AgSe, preserving its excellent electrical performance. The AgSeS sample achieved the highest power factor of ∼21 μW cm⁻¹ K at 300 K. Additionally, S-doping introduced pores and particles into the AgSe matrix, significantly reducing the material's thermal conductivity. Specifically, the lattice thermal conductivity of the AgSeS sample decreased to 0.14 W m⁻¹ K⁻¹ at 373 K. As a result, the AgSeS sample achieved an optimal ZT of ∼0.67 at room temperature, while the AgSeS sample exhibited relatively high ZT values across the entire measurement temperature range, from 0.56 at 300 K to 0.67 at 373 K. These results demonstrate the potential of AgSe as a competitive candidate for room-temperature thermoelectric applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. The doping strategies for modulation of transport properties in thermoelectric materials10.1002/adfm.202411304 ↗
2. Doping strategy in metavalently bonded materials for advancing thermoelectric performance10.1038/s41467-024-52645-3 ↗
3. Band engineering of thermoelectric materials10.1002/adma.201202919 ↗
4. Multi-scale microstructural thermoelectric materials: transport behavior, non-equilibrium preparation, and applications10.1002/adma.201602013 ↗
5. Thermoelectric device performance beyond average ZT: holistic consideration of materials and design
6. Rare three-valence-band convergence leading to ultrahigh thermoelectric performance in all-scale hierarchical cubic SnTe10.1039/D3EE02482B ↗
7. Realizing high figure of merit in heavy-band p-type half-Heusler thermoelectric materials10.1038/ncomms9144 ↗
8. A systematic approach for semiconductor half-heusler10.3389/fmats.2021.745698 ↗
9. High-performance magnesium-based thermoelectric materials: progress and challenges10.1016/j.jma.2022.05.021 ↗
10. Convergence of conduction bands as a means of enhancing thermoelectric performance of n-type Mg2Si(1-x)Sn(x) solid solutions10.1103/PhysRevLett.108.166601 ↗
11. Polycrystalline SnSe with a thermoelectric figure of merit greater than the single crystal10.1038/s41563-021-01064-6 ↗
12. Pseudo-nanostructure and trapped-hole release induce high thermoelectric performance in PbTe10.1126/science.adj8175 ↗
13. Evolution of defect structures leading to high ZT in GeTe-based thermoelectric materials10.1038/s41467-022-33774-z ↗
14. Highly stabilized and efficient thermoelectric copper selenide10.1038/s41563-024-01815-1 ↗
15. Advances in bismuth-telluride-based thermoelectric devices: progress and challenges10.1016/j.esci.2023.100122 ↗
16. Thermoelectric nanowires for dense 3D printed architectures10.1039/D3MH01646C ↗
17. High performance n-type Ag2Se film on nylon membrane for flexible thermoelectric power generator10.1038/s41467-019-08835-5 ↗
18. A novel route for preparing Ag2Se-based micro-nanocomposites and their photocatalytic activity10.1007/s11051-022-05546-9 ↗
19. Uniform nickel deposition into ordered alumina pores by pulsed electrodeposition10.1002/(SICI)1521-4095(200004)12:8<582::AID-ADMA582>3.0.CO;2-3 ↗
20. Electrodeposition of silver selenide thin films from aqueous solutions10.1039/b107177g ↗
21. Electrical and thermal properties of Bi2Te310.1103/PhysRev.108.1164 ↗
22. Energy Gap in β−Ag2Se10.1103/PhysRev.159.645 ↗
23. Thermoelectric and crystallographic properties of Ag2Se10.1149/1.2427584 ↗
24. Ag2Q-based (Q = S, Se, Te) silver chalcogenide thermoelectric materials10.1002/adma.202110236 ↗
25. Ultrahigh power factor and flexible silver selenide-based composite film for thermoelectric devices10.1039/C9EE01609K ↗
26. Advances in Ag2Se-based thermoelectrics from materials to applications10.1039/D3EE00378G ↗
27. Temperature-dependent structural variation and Cu substitution in thermoelectric silver selenide10.1021/acsaem.9b02231 ↗
28. Constructing n-type Ag2Se/CNTs composites toward synergistically enhanced thermoelectric and mechanical performance10.1016/j.actamat.2021.117502 ↗
29. Thermoelectric transport of Se-rich Ag2Se in normal phases and phase transitions10.1063/1.4870509 ↗
30. Ag2Se nanorod arrays with ultrahigh room temperature thermoelectric performance and superior mechanical properties10.1021/acsami.3c06231 ↗
31. Hierarchical structures advance thermoelectric properties of porous n-type β-Ag2Se10.1021/acsami.0c15341 ↗
32. Thermoelectric and thermal stability improvements in Nano-Cu2Se included Ag2Se10.1016/j.jssc.2019.02.037 ↗
33. Structural stability enables high thermoelectric performance in room temperature Ag2Se10.1039/D0TA02614J ↗
34. Thermoelectric Ag2Se: imperfection, homogeneity, and reproducibility10.1021/acsami.1c18483 ↗
35. Aqueous synthesis, doping, and processing of n-type Ag2Se for high thermoelectric performance at near-room-temperature10.1021/acs.inorgchem.2c00060 ↗
36. Crystalline structure-dependent mechanical and thermoelectric performance in Ag2Se1-xSx System10.34133/2020/6591981 ↗
37. Distinctive extrinsic atom effects on the structural, optical, and electronic properties of Bi2S3-xSex solid solutions10.1021/acs.chemmater.6b02081 ↗
38. General surfactant-free synthesis of binary silver chalcogenides with tuneable thermoelectric properties10.1016/j.cej.2020.124763 ↗
39. Effect of sintering temperature on the thermoelectric properties of Ag2Se fabricated by spark plasma sintering with high compression10.1002/aesr.202300082 ↗
40. A route to high thermoelectric performance: solution-based control of microstructure and composition in Ag2Se10.1002/aenm.202400408 ↗
41. Tailoring the lattice thermal conductivity of Al-Incorporated Ag2Se for near room temperature waste heat recovery10.1002/cnma.202400298 ↗
42. Solvothermal synthesis of micro-pillar shaped Ag2Se and its thermoelectric potential
43. Study of the defect chemistry in Ag2Q (Q = S, Se, Te) by first-principles calculations
44. Ag interstitial inhibition and phonon scattering at the ZnSe nano-precipitates to enhance the thermoelectric performance of Ag2Se10.1021/acsaem.2c03704 ↗
45. Interface scattering induced low thermal conductivity in Ag2Se/MWCNT for enhanced thermoelectric application10.1016/j.diamond.2023.110344 ↗
46. Revealing the promising near-room-temperature thermoelectric performance in Ag2Se single crystals
47. AgSbSe2 inclusions enabling high thermoelectric and mechanical performance in n-type Ag2Se-based composites10.1016/j.actamat.2023.118753 ↗
48. Enhanced thermoelectric properties of Ag2Se by manipulation in carrier concentration via acetylene carbon black nanocomposites10.1016/j.rinp.2024.107967 ↗